The board is named pcm051 and has this hardware: SOC: TI AM3359 DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB ETH 1: LAN8710AI SPI-Flash: W25Q64BVSSIG RTC: RV-4162-C7 I2C-EEPROM: CAT32WC32 NAND: MT29F4G08_VFPGA63 PMIC: TPS65910A3 LCD Supported: UART 1 MMC/SD ETH 1 USB I2C SPI Not yet supported: NAND RTC LCD Signed-off-by: Lars Poeschel <poeschel@lemonage.de> [trini: Add #define CONFIG_PHY_ADDR 0 to config] Signed-off-by: Tom Rini <trini@ti.com>master
Lars Poeschel
12 years ago
committed by
Tom Rini
parent
aca0b8b4f7
commit
1c1b7c3739
@ -0,0 +1,46 @@ |
||||
#
|
||||
# Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
# kind, whether express or implied; without even the implied warranty
|
||||
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
ifdef CONFIG_SPL_BUILD |
||||
COBJS := mux.o
|
||||
endif |
||||
|
||||
COBJS += board.o
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS) |
||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||
|
||||
clean: |
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean |
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
||||
@ -0,0 +1,266 @@ |
||||
/*
|
||||
* board.c |
||||
* |
||||
* Board functions for Phytec phyCORE-AM335x (pcm051) based boards |
||||
* |
||||
* Copyright (C) 2013 Lemonage Software GmbH |
||||
* Author Lars Poeschel <poeschel@lemonage.de> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <errno.h> |
||||
#include <spl.h> |
||||
#include <asm/arch/cpu.h> |
||||
#include <asm/arch/hardware.h> |
||||
#include <asm/arch/omap.h> |
||||
#include <asm/arch/ddr_defs.h> |
||||
#include <asm/arch/clock.h> |
||||
#include <asm/arch/gpio.h> |
||||
#include <asm/arch/mmc_host_def.h> |
||||
#include <asm/arch/sys_proto.h> |
||||
#include <asm/io.h> |
||||
#include <asm/emif.h> |
||||
#include <asm/gpio.h> |
||||
#include <i2c.h> |
||||
#include <miiphy.h> |
||||
#include <cpsw.h> |
||||
#include "board.h" |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; |
||||
#ifdef CONFIG_SPL_BUILD |
||||
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; |
||||
#endif |
||||
|
||||
/* MII mode defines */ |
||||
#define MII_MODE_ENABLE 0x0 |
||||
#define RGMII_MODE_ENABLE 0xA |
||||
#define RMII_RGMII2_MODE_ENABLE 0x49 |
||||
|
||||
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; |
||||
|
||||
/* UART defines */ |
||||
#ifdef CONFIG_SPL_BUILD |
||||
#define UART_RESET (0x1 << 1) |
||||
#define UART_CLK_RUNNING_MASK 0x1 |
||||
#define UART_SMART_IDLE_EN (0x1 << 0x3) |
||||
|
||||
/* DDR RAM defines */ |
||||
#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */ |
||||
|
||||
static void rtc32k_enable(void) |
||||
{ |
||||
struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; |
||||
|
||||
/*
|
||||
* Unlock the RTC's registers. For more details please see the |
||||
* RTC_SS section of the TRM. In order to unlock we need to |
||||
* write these specific values (keys) in this order. |
||||
*/ |
||||
writel(0x83e70b13, &rtc->kick0r); |
||||
writel(0x95a4f1e0, &rtc->kick1r); |
||||
|
||||
/* Enable the RTC 32K OSC by setting bits 3 and 6. */ |
||||
writel((1 << 3) | (1 << 6), &rtc->osc); |
||||
} |
||||
|
||||
static const struct ddr_data ddr3_data = { |
||||
.datardsratio0 = MT41J256M8HX15E_RD_DQS, |
||||
.datawdsratio0 = MT41J256M8HX15E_WR_DQS, |
||||
.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE, |
||||
.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA, |
||||
.datadldiff0 = PHY_DLL_LOCK_DIFF, |
||||
}; |
||||
|
||||
static const struct cmd_control ddr3_cmd_ctrl_data = { |
||||
.cmd0csratio = MT41J256M8HX15E_RATIO, |
||||
.cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, |
||||
.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT, |
||||
|
||||
.cmd1csratio = MT41J256M8HX15E_RATIO, |
||||
.cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, |
||||
.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT, |
||||
|
||||
.cmd2csratio = MT41J256M8HX15E_RATIO, |
||||
.cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, |
||||
.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT, |
||||
}; |
||||
|
||||
static struct emif_regs ddr3_emif_reg_data = { |
||||
.sdram_config = MT41J256M8HX15E_EMIF_SDCFG, |
||||
.ref_ctrl = MT41J256M8HX15E_EMIF_SDREF, |
||||
.sdram_tim1 = MT41J256M8HX15E_EMIF_TIM1, |
||||
.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2, |
||||
.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3, |
||||
.zq_config = MT41J256M8HX15E_ZQ_CFG, |
||||
.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY, |
||||
}; |
||||
#endif |
||||
|
||||
/*
|
||||
* early system init of muxing and clocks. |
||||
*/ |
||||
void s_init(void) |
||||
{ |
||||
/*
|
||||
* WDT1 is already running when the bootloader gets control |
||||
* Disable it to avoid "random" resets |
||||
*/ |
||||
writel(0xAAAA, &wdtimer->wdtwspr); |
||||
while (readl(&wdtimer->wdtwwps) != 0x0) |
||||
; |
||||
writel(0x5555, &wdtimer->wdtwspr); |
||||
while (readl(&wdtimer->wdtwwps) != 0x0) |
||||
; |
||||
|
||||
#ifdef CONFIG_SPL_BUILD |
||||
/* Setup the PLLs and the clocks for the peripherals */ |
||||
pll_init(); |
||||
|
||||
/* Enable RTC32K clock */ |
||||
rtc32k_enable(); |
||||
|
||||
/* UART softreset */ |
||||
u32 regval; |
||||
|
||||
enable_uart0_pin_mux(); |
||||
|
||||
regval = readl(&uart_base->uartsyscfg); |
||||
regval |= UART_RESET; |
||||
writel(regval, &uart_base->uartsyscfg); |
||||
while ((readl(&uart_base->uartsyssts) & UART_CLK_RUNNING_MASK) |
||||
!= UART_CLK_RUNNING_MASK) |
||||
; |
||||
|
||||
/* Disable smart idle */ |
||||
regval = readl(&uart_base->uartsyscfg); |
||||
regval |= UART_SMART_IDLE_EN; |
||||
writel(regval, &uart_base->uartsyscfg); |
||||
|
||||
gd = &gdata; |
||||
|
||||
preloader_console_init(); |
||||
|
||||
/* Initalize the board header */ |
||||
enable_i2c0_pin_mux(); |
||||
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); |
||||
|
||||
enable_board_pin_mux(); |
||||
|
||||
config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, |
||||
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); |
||||
#endif |
||||
} |
||||
|
||||
/*
|
||||
* Basic board specific setup. Pinmux has been handled already. |
||||
*/ |
||||
int board_init(void) |
||||
{ |
||||
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); |
||||
|
||||
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
#ifdef CONFIG_DRIVER_TI_CPSW |
||||
static void cpsw_control(int enabled) |
||||
{ |
||||
/* VTP can be added here */ |
||||
|
||||
return; |
||||
} |
||||
|
||||
static struct cpsw_slave_data cpsw_slaves[] = { |
||||
{ |
||||
.slave_reg_ofs = 0x208, |
||||
.sliver_reg_ofs = 0xd80, |
||||
.phy_id = 0, |
||||
.phy_if = PHY_INTERFACE_MODE_RGMII, |
||||
}, |
||||
{ |
||||
.slave_reg_ofs = 0x308, |
||||
.sliver_reg_ofs = 0xdc0, |
||||
.phy_id = 1, |
||||
.phy_if = PHY_INTERFACE_MODE_RGMII, |
||||
}, |
||||
}; |
||||
|
||||
static struct cpsw_platform_data cpsw_data = { |
||||
.mdio_base = AM335X_CPSW_MDIO_BASE, |
||||
.cpsw_base = AM335X_CPSW_BASE, |
||||
.mdio_div = 0xff, |
||||
.channels = 8, |
||||
.cpdma_reg_ofs = 0x800, |
||||
.slaves = 1, |
||||
.slave_data = cpsw_slaves, |
||||
.ale_reg_ofs = 0xd00, |
||||
.ale_entries = 1024, |
||||
.host_port_reg_ofs = 0x108, |
||||
.hw_stats_reg_ofs = 0x900, |
||||
.mac_control = (1 << 5), |
||||
.control = cpsw_control, |
||||
.host_port_num = 0, |
||||
.version = CPSW_CTRL_VERSION_2, |
||||
}; |
||||
#endif |
||||
|
||||
#if defined(CONFIG_DRIVER_TI_CPSW) || \ |
||||
(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) |
||||
int board_eth_init(bd_t *bis) |
||||
{ |
||||
int rv, n = 0; |
||||
#ifdef CONFIG_DRIVER_TI_CPSW |
||||
uint8_t mac_addr[6]; |
||||
uint32_t mac_hi, mac_lo; |
||||
|
||||
if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { |
||||
printf("<ethaddr> not set. Reading from E-fuse\n"); |
||||
/* try reading mac address from efuse */ |
||||
mac_lo = readl(&cdev->macid0l); |
||||
mac_hi = readl(&cdev->macid0h); |
||||
mac_addr[0] = mac_hi & 0xFF; |
||||
mac_addr[1] = (mac_hi & 0xFF00) >> 8; |
||||
mac_addr[2] = (mac_hi & 0xFF0000) >> 16; |
||||
mac_addr[3] = (mac_hi & 0xFF000000) >> 24; |
||||
mac_addr[4] = mac_lo & 0xFF; |
||||
mac_addr[5] = (mac_lo & 0xFF00) >> 8; |
||||
|
||||
if (is_valid_ether_addr(mac_addr)) |
||||
eth_setenv_enetaddr("ethaddr", mac_addr); |
||||
else |
||||
goto try_usbether; |
||||
} |
||||
|
||||
writel(RMII_RGMII2_MODE_ENABLE, &cdev->miisel); |
||||
|
||||
rv = cpsw_register(&cpsw_data); |
||||
if (rv < 0) |
||||
printf("Error %d registering CPSW switch\n", rv); |
||||
else |
||||
n += rv; |
||||
try_usbether: |
||||
#endif |
||||
|
||||
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) |
||||
rv = usb_eth_initialize(bis); |
||||
if (rv < 0) |
||||
printf("Error %d registering USB_ETHER\n", rv); |
||||
else |
||||
n += rv; |
||||
#endif |
||||
return n; |
||||
} |
||||
#endif |
||||
@ -0,0 +1,33 @@ |
||||
/*
|
||||
* board.h |
||||
* |
||||
* Phytec phyCORE-AM335x (pcm051) boards information header |
||||
* |
||||
* Copyright (C) 2013, Lemonage Software GmbH |
||||
* Author Lars Poeschel <poeschel@lemonage.de> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#ifndef _BOARD_H_ |
||||
#define _BOARD_H_ |
||||
|
||||
/*
|
||||
* We have three pin mux functions that must exist. We must be able to enable |
||||
* uart0, for initial output and i2c0 to read the main EEPROM. We then have a |
||||
* main pinmux function that can be overridden to enable all other pinmux that |
||||
* is required on the board. |
||||
*/ |
||||
void enable_uart0_pin_mux(void); |
||||
void enable_i2c0_pin_mux(void); |
||||
void enable_board_pin_mux(void); |
||||
void enable_cbmux_pin_mux(void); |
||||
#endif |
||||
@ -0,0 +1,133 @@ |
||||
/*
|
||||
* mux.c |
||||
* |
||||
* Copyright (C) 2013 Lemonage Software GmbH |
||||
* Author Lars Poeschel <poeschel@lemonage.de> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation version 2. |
||||
* |
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any |
||||
* kind, whether express or implied; without even the implied warranty |
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <asm/arch/sys_proto.h> |
||||
#include <asm/arch/hardware.h> |
||||
#include <asm/arch/mux.h> |
||||
#include <asm/io.h> |
||||
#include "board.h" |
||||
|
||||
static struct module_pin_mux uart0_pin_mux[] = { |
||||
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
||||
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
||||
{-1}, |
||||
}; |
||||
|
||||
#ifdef CONFIG_MMC |
||||
static struct module_pin_mux mmc0_pin_mux[] = { |
||||
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ |
||||
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ |
||||
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ |
||||
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ |
||||
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ |
||||
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ |
||||
{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ |
||||
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ |
||||
{-1}, |
||||
}; |
||||
#endif |
||||
|
||||
#ifdef CONFIG_I2C |
||||
static struct module_pin_mux i2c0_pin_mux[] = { |
||||
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | |
||||
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ |
||||
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | |
||||
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ |
||||
{-1}, |
||||
}; |
||||
#endif |
||||
|
||||
#ifdef CONFIG_SPI |
||||
static struct module_pin_mux spi0_pin_mux[] = { |
||||
{OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ |
||||
{OFFSET(spi0_d0), (MODE(0) | RXACTIVE | |
||||
PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ |
||||
{OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ |
||||
{OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | |
||||
PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ |
||||
{-1}, |
||||
}; |
||||
#endif |
||||
|
||||
static struct module_pin_mux gpio0_7_pin_mux[] = { |
||||
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */ |
||||
{-1}, |
||||
}; |
||||
|
||||
static struct module_pin_mux rmii1_pin_mux[] = { |
||||
{OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ |
||||
{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ |
||||
{OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ |
||||
{OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ |
||||
{OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ |
||||
{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ |
||||
{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ |
||||
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
||||
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
||||
{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ |
||||
{-1}, |
||||
}; |
||||
|
||||
static struct module_pin_mux cbmux_pin_mux[] = { |
||||
{OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLDOWN_EN}, /* JP3 */ |
||||
{OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUP_EN}, /* JP4 */ |
||||
{-1}, |
||||
}; |
||||
|
||||
#ifdef CONFIG_NAND |
||||
static struct module_pin_mux nand_pin_mux[] = { |
||||
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ |
||||
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ |
||||
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ |
||||
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ |
||||
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ |
||||
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ |
||||
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ |
||||
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ |
||||
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ |
||||
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ |
||||
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ |
||||
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ |
||||
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ |
||||
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ |
||||
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ |
||||
{-1}, |
||||
}; |
||||
#endif |
||||
|
||||
void enable_uart0_pin_mux(void) |
||||
{ |
||||
configure_module_pin_mux(uart0_pin_mux); |
||||
} |
||||
|
||||
void enable_i2c0_pin_mux(void) |
||||
{ |
||||
configure_module_pin_mux(i2c0_pin_mux); |
||||
} |
||||
|
||||
void enable_board_pin_mux() |
||||
{ |
||||
configure_module_pin_mux(rmii1_pin_mux); |
||||
configure_module_pin_mux(mmc0_pin_mux); |
||||
configure_module_pin_mux(cbmux_pin_mux); |
||||
#ifdef CONFIG_NAND |
||||
configure_module_pin_mux(nand_pin_mux); |
||||
#endif |
||||
#ifdef CONFIG_SPI |
||||
configure_module_pin_mux(spi0_pin_mux); |
||||
#endif |
||||
} |
||||
@ -0,0 +1,301 @@ |
||||
/*
|
||||
* pcm051.h |
||||
* |
||||
* Phytec phyCORE-AM335x (pcm051) boards information header |
||||
* |
||||
* Copyright (C) 2013 Lemonage Software GmbH |
||||
* Author Lars Poeschel <poeschel@lemonage.de> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation version 2. |
||||
* |
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any |
||||
* kind, whether express or implied; without even the implied warranty |
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_PCM051_H |
||||
#define __CONFIG_PCM051_H |
||||
|
||||
#define CONFIG_AM33XX |
||||
|
||||
#include <asm/arch/cpu.h> |
||||
#include <asm/arch/hardware.h> |
||||
|
||||
#define CONFIG_DMA_COHERENT |
||||
#define CONFIG_DMA_COHERENT_SIZE (1 << 20) |
||||
|
||||
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ |
||||
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) |
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
||||
#define CONFIG_SYS_PROMPT "U-Boot# " |
||||
#define CONFIG_SYS_NO_FLASH |
||||
#define MACH_TYPE_PCM051 4144 /* Until the next sync */ |
||||
#define CONFIG_MACH_TYPE MACH_TYPE_PCM051 |
||||
|
||||
#define CONFIG_OF_LIBFDT |
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ |
||||
#define CONFIG_SETUP_MEMORY_TAGS |
||||
#define CONFIG_INITRD_TAG |
||||
|
||||
/* commands to include */ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_ASKENV |
||||
#define CONFIG_VERSION_VARIABLE |
||||
|
||||
/* set to negative value for no autoboot */ |
||||
#define CONFIG_BOOTDELAY 1 |
||||
#define CONFIG_ENV_VARS_UBOOT_CONFIG |
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"loadaddr=0x80007fc0\0" \
|
||||
"fdtaddr=0x80000000\0" \
|
||||
"rdaddr=0x81000000\0" \
|
||||
"bootfile=uImage\0" \
|
||||
"fdtfile=pcm051.dtb\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"optargs=\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
||||
"mmcrootfstype=ext4 rootwait\0" \
|
||||
"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
|
||||
"ramrootfstype=ext2\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype}\0" \
|
||||
"bootenv=uEnv.txt\0" \
|
||||
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
||||
"importbootenv=echo Importing environment from mmc ...; " \
|
||||
"env import -t $loadaddr $filesize\0" \
|
||||
"ramargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${ramroot} " \
|
||||
"rootfstype=${ramrootfstype}\0" \
|
||||
"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
|
||||
"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
|
||||
"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"ramboot=echo Booting from ramdisk ...; " \
|
||||
"run ramargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \ |
||||
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||
"echo SD/MMC found on device ${mmcdev};" \
|
||||
"if run loadbootenv; then " \
|
||||
"echo Loaded environment from ${bootenv};" \
|
||||
"run importbootenv;" \
|
||||
"fi;" \
|
||||
"if test -n $uenvcmd; then " \
|
||||
"echo Running uenvcmd ...;" \
|
||||
"run uenvcmd;" \
|
||||
"fi;" \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot;" \
|
||||
"fi;" \
|
||||
"fi;" \
|
||||
|
||||
/* Clock Defines */ |
||||
#define V_OSCK 25000000 /* Clock output from T2 */ |
||||
#define V_SCLK (V_OSCK) |
||||
|
||||
#define CONFIG_CMD_ECHO |
||||
|
||||
/* max number of command args */ |
||||
#define CONFIG_SYS_MAXARGS 16 |
||||
|
||||
/* Console I/O Buffer Size */ |
||||
#define CONFIG_SYS_CBSIZE 512 |
||||
|
||||
/* Print Buffer Size */ |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ |
||||
+ sizeof(CONFIG_SYS_PROMPT) + 16) |
||||
|
||||
/* Boot Argument Buffer Size */ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
||||
|
||||
/*
|
||||
* memtest works on 8 MB in DRAM after skipping 32MB from |
||||
* start addr of ram disk |
||||
*/ |
||||
#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) |
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ |
||||
+ (8 * 1024 * 1024)) |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */ |
||||
#define CONFIG_SYS_HZ 1000 /* 1ms clock */ |
||||
|
||||
#define CONFIG_MMC |
||||
#define CONFIG_GENERIC_MMC |
||||
#define CONFIG_OMAP_HSMMC |
||||
#define CONFIG_CMD_MMC |
||||
#define CONFIG_DOS_PARTITION |
||||
#define CONFIG_CMD_FAT |
||||
#define CONFIG_CMD_EXT2 |
||||
|
||||
#define CONFIG_SPI |
||||
#define CONFIG_OMAP3_SPI |
||||
#define CONFIG_MTD_DEVICE |
||||
#define CONFIG_SPI_FLASH |
||||
#define CONFIG_SPI_FLASH_WINBOND |
||||
#define CONFIG_CMD_SF |
||||
#define CONFIG_SF_DEFAULT_SPEED 24000000 |
||||
|
||||
/* Physical Memory Map */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ |
||||
#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ |
||||
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 19) /* 512MiB */ |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 |
||||
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ |
||||
GENERATED_GBL_DATA_SIZE) |
||||
/* Platform/Board specific defs */ |
||||
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ |
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ |
||||
#define CONFIG_SYS_HZ 1000 |
||||
|
||||
#define CONFIG_CONS_INDEX 1 |
||||
/* NS16550 Configuration */ |
||||
#define CONFIG_SYS_NS16550 |
||||
#define CONFIG_SYS_NS16550_SERIAL |
||||
#define CONFIG_SERIAL_MULTI |
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4) |
||||
#define CONFIG_SYS_NS16550_CLK (48000000) |
||||
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ |
||||
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ |
||||
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ |
||||
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ |
||||
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ |
||||
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ |
||||
|
||||
/* I2C Configuration */ |
||||
#define CONFIG_I2C |
||||
#define CONFIG_CMD_I2C |
||||
#define CONFIG_HARD_I2C |
||||
#define CONFIG_SYS_I2C_SPEED 100000 |
||||
#define CONFIG_SYS_I2C_SLAVE 1 |
||||
#define CONFIG_I2C_MULTI_BUS |
||||
#define CONFIG_DRIVER_OMAP24XX_I2C |
||||
#define CONFIG_CMD_EEPROM |
||||
#define CONFIG_ENV_EEPROM_IS_ON_I2C |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
||||
#define CONFIG_SYS_I2C_MULTI_EEPROMS |
||||
|
||||
#define CONFIG_OMAP_GPIO |
||||
|
||||
#define CONFIG_BAUDRATE 115200 |
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ |
||||
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } |
||||
|
||||
#define CONFIG_ENV_OVERWRITE |
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET |
||||
|
||||
#define CONFIG_ENV_IS_NOWHERE |
||||
|
||||
/* Defines for SPL */ |
||||
#define CONFIG_SPL |
||||
#define CONFIG_SPL_FRAMEWORK |
||||
#define CONFIG_SPL_TEXT_BASE 0x402F0400 |
||||
#define CONFIG_SPL_MAX_SIZE (101 * 1024) |
||||
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR |
||||
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 |
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ |
||||
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ |
||||
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ |
||||
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 |
||||
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" |
||||
#define CONFIG_SPL_MMC_SUPPORT |
||||
#define CONFIG_SPL_FAT_SUPPORT |
||||
#define CONFIG_SPL_I2C_SUPPORT |
||||
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT |
||||
#define CONFIG_SPL_LIBDISK_SUPPORT |
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT |
||||
#define CONFIG_SPL_SERIAL_SUPPORT |
||||
#define CONFIG_SPL_GPIO_SUPPORT |
||||
#define CONFIG_SPL_YMODEM_SUPPORT |
||||
#define CONFIG_SPL_NET_SUPPORT |
||||
#define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL" |
||||
#define CONFIG_SPL_ETH_SUPPORT |
||||
#define CONFIG_SPL_SPI_SUPPORT |
||||
#define CONFIG_SPL_SPI_FLASH_SUPPORT |
||||
#define CONFIG_SPL_SPI_LOAD |
||||
#define CONFIG_SPL_SPI_BUS 0 |
||||
#define CONFIG_SPL_SPI_CS 0 |
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 |
||||
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 |
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" |
||||
|
||||
/*
|
||||
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM |
||||
* 64 bytes before this address should be set aside for u-boot.img's |
||||
* header. That is 0x800FFFC0--0x80100000 should not be used for any |
||||
* other needs. |
||||
*/ |
||||
#define CONFIG_SYS_TEXT_BASE 0x80800000 |
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 |
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 |
||||
|
||||
/* Since SPL did pll and ddr initialization for us,
|
||||
* we don't need to do it twice. |
||||
*/ |
||||
#ifndef CONFIG_SPL_BUILD |
||||
#define CONFIG_SKIP_LOWLEVEL_INIT |
||||
#endif |
||||
|
||||
/*
|
||||
* USB configuration |
||||
*/ |
||||
#define CONFIG_USB_MUSB_DSPS |
||||
#define CONFIG_ARCH_MISC_INIT |
||||
#define CONFIG_MUSB_GADGET |
||||
#define CONFIG_MUSB_PIO_ONLY |
||||
#define CONFIG_USB_GADGET_DUALSPEED |
||||
#define CONFIG_MUSB_HOST |
||||
#define CONFIG_AM335X_USB0 |
||||
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL |
||||
#define CONFIG_AM335X_USB1 |
||||
#define CONFIG_AM335X_USB1_MODE MUSB_HOST |
||||
|
||||
#ifdef CONFIG_MUSB_HOST |
||||
#define CONFIG_CMD_USB |
||||
#define CONFIG_USB_STORAGE |
||||
#endif |
||||
|
||||
#ifdef CONFIG_MUSB_GADGET |
||||
#define CONFIG_USB_ETHER |
||||
#define CONFIG_USB_ETH_RNDIS |
||||
#endif /* CONFIG_MUSB_GADGET */ |
||||
|
||||
/* Unsupported features */ |
||||
#undef CONFIG_USE_IRQ |
||||
|
||||
#define CONFIG_CMD_NET |
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_PING |
||||
#define CONFIG_DRIVER_TI_CPSW |
||||
#define CONFIG_MII |
||||
#define CONFIG_BOOTP_DEFAULT |
||||
#define CONFIG_BOOTP_DNS |
||||
#define CONFIG_BOOTP_DNS2 |
||||
#define CONFIG_BOOTP_SEND_HOSTNAME |
||||
#define CONFIG_BOOTP_GATEWAY |
||||
#define CONFIG_BOOTP_SUBNETMASK |
||||
#define CONFIG_NET_RETRY_COUNT 10 |
||||
#define CONFIG_NET_MULTI |
||||
#define CONFIG_PHY_GIGE |
||||
#define CONFIG_PHYLIB |
||||
#define CONFIG_PHY_ADDR 0 |
||||
#define CONFIG_PHY_SMSC |
||||
|
||||
#endif /* ! __CONFIG_PCM051_H */ |
||||
Loading…
Reference in new issue