Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

drivers: usb: musb: adopt musb backend driver to driver model

Browse Source 
Currently all backend driver ops uses hard coded physical
address, so to adopt the driver to DM, add device pointer to ops
call backs so that drivers can get physical addresses from the
usb driver priv/plat data.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
master
Mugunthan V N 8 years ago committed by Simon Glass
parent 3aec264869
commit 1cac34ce16
6 changed files with 23 additions and 22 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      arch/arm/include/asm/arch-omap3/musb.h
  2. 7
      arch/arm/include/asm/omap_musb.h
  3. 4
      arch/arm/mach-omap2/am33xx/board.c
  4. 6
      arch/arm/mach-omap2/omap3/am35x_musb.c
  5. 14
      drivers/usb/musb-new/am35x.c
  6. 8
      drivers/usb/musb-new/musb_dsps.c

6
arch/arm/include/asm/arch-omap3/musb.h
Unescape View File

@ -7,7 +7,7 @@
#ifndef __ASM_ARCH_OMAP3_MUSB_H
#define __ASM_ARCH_OMAP3_MUSB_H
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
extern void am35x_musb_clear_irq(void);
void am35x_musb_reset(struct udevice *dev);
void am35x_musb_phy_power(struct udevice *dev, u8 on);
void am35x_musb_clear_irq(struct udevice *dev);
#endif

7
arch/arm/include/asm/omap_musb.h
Unescape View File

@ -15,9 +15,10 @@ extern const struct musb_platform_ops omap2430_ops;
struct omap_musb_board_data {
u8 interface_type;
void (*set_phy_power)(u8 on);
void (*clear_irq)(void);
void (*reset)(void);
struct udevice *dev;
void (*set_phy_power)(struct udevice *dev, u8 on);
void (*clear_irq)(struct udevice *dev);
void (*reset)(struct udevice *dev);
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

4
arch/arm/mach-omap2/am33xx/board.c
Unescape View File

@ -148,7 +148,7 @@ static struct musb_hdrc_config musb_config = {
};
#ifdef CONFIG_AM335X_USB0
static void am33xx_otg0_set_phy_power(u8 on)
static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
{
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
}
@ -167,7 +167,7 @@ static struct musb_hdrc_platform_data otg0_plat = {
#endif
#ifdef CONFIG_AM335X_USB1
static void am33xx_otg1_set_phy_power(u8 on)
static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
{
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
}

6
arch/arm/mach-omap2/omap3/am35x_musb.c
Unescape View File

@ -13,7 +13,7 @@
#include <asm/io.h>
#include <asm/arch/am35x_def.h>
void am35x_musb_reset(void)
void am35x_musb_reset(struct udevice *dev)
{
/* Reset the musb interface */
clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
@ -22,7 +22,7 @@ void am35x_musb_reset(void)
USBOTGSS_SW_RST, 0);
}
void am35x_musb_phy_power(u8 on)
void am35x_musb_phy_power(struct udevice *dev, u8 on)
{
unsigned long start = get_timer(0);
@ -53,7 +53,7 @@ void am35x_musb_phy_power(u8 on)
}
}
void am35x_musb_clear_irq(void)
void am35x_musb_clear_irq(struct udevice *dev)
{
clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
0, USBOTGSS_INT_CLR);

14
drivers/usb/musb-new/am35x.c
Unescape View File

@ -336,7 +336,7 @@ eoi:
if (ret == IRQ_HANDLED || epintr || usbintr) {
/* clear level interrupt */
if (data->clear_irq)
data->clear_irq();
data->clear_irq(data->dev);
/* write EOI */
musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
}
@ -401,14 +401,14 @@ static int am35x_musb_init(struct musb *musb)
/* Reset the musb */
if (data->reset)
data->reset();
data->reset(data->dev);
/* Reset the controller */
musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
/* Start the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(1);
data->set_phy_power(data->dev, 1);
msleep(5);
@ -416,7 +416,7 @@ static int am35x_musb_init(struct musb *musb)
/* clear level interrupt */
if (data->clear_irq)
data->clear_irq();
data->clear_irq(data->dev);
return 0;
}
@ -439,7 +439,7 @@ static int am35x_musb_exit(struct musb *musb)
/* Shutdown the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(0);
data->set_phy_power(data->dev, 0);
#ifndef __UBOOT__
usb_put_phy(musb->xceiv);
@ -630,7 +630,7 @@ static int am35x_suspend(struct device *dev)
/* Shutdown the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(0);
data->set_phy_power(data->dev, 0);
clk_disable(glue->phy_clk);
clk_disable(glue->clk);
@ -647,7 +647,7 @@ static int am35x_resume(struct device *dev)
/* Start the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(1);
data->set_phy_power(data->dev, 1);
ret = clk_enable(glue->phy_clk);
if (ret) {

8
drivers/usb/musb-new/musb_dsps.c
Unescape View File

@ -452,7 +452,7 @@ static int dsps_musb_init(struct musb *musb)
/* Start the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(1);
data->set_phy_power(data->dev, 1);
musb->isr = dsps_interrupt;
@ -493,7 +493,7 @@ static int dsps_musb_exit(struct musb *musb)
/* Shutdown the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(0);
data->set_phy_power(data->dev, 0);
#ifndef __UBOOT__
/* NOP driver needs change if supporting dual instance */
@ -693,7 +693,7 @@ static int dsps_suspend(struct device *dev)
/* Shutdown the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(0);
data->set_phy_power(data->dev, 0);
return 0;
}
@ -705,7 +705,7 @@ static int dsps_resume(struct device *dev)
/* Start the on-chip PHY and its PLL. */
if (data->set_phy_power)
data->set_phy_power(1);
data->set_phy_power(data->dev, 1);
return 0;
}

Write Preview
Loading…
Cancel
Save