Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

board/freescale/common/sys_eeprom.c

@@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void)
 	if ((be.major == 0xff) && (be.minor == 0xff))
 		return MPC85XX_CPU_BOARD_REV(0, 0);
 
-	return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+	return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
 }
 #endif

cpu/mpc85xx/cpu.c

@@ -85,7 +85,8 @@ int checkcpu (void)
 	struct cpu_type *cpu;
 #ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
 	u32 ddr_ratio = 0;
 #endif

cpu/mpc85xx/fdt.c

@@ -152,7 +152,6 @@ static inline void ft_fixup_l2cache(void *blob)
 	}
 	fdt_setprop(blob, off, "cache-unified", NULL, 0);
 	fdt_setprop_cell(blob, off, "cache-block-size", line_size);
-	fdt_setprop_cell(blob, off, "cache-line-size", line_size);
 	fdt_setprop_cell(blob, off, "cache-size", size);
 	fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 	fdt_setprop_cell(blob, off, "cache-level", 2);
@@ -181,7 +180,6 @@ static inline void ft_fixup_cache(void *blob)
 		dnum_sets = dsize / (dline_size * dnum_ways);
 
 		fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
-		fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
 		fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 		fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 
@@ -192,7 +190,6 @@ static inline void ft_fixup_cache(void *blob)
 		inum_sets = isize / (iline_size * inum_ways);
 
 		fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
-		fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
 		fdt_setprop_cell(blob, off, "i-cache-size", isize);
 		fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 

cpu/mpc85xx/speed.c

@@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo)
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
-		u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
@@ -101,9 +102,9 @@ int get_clocks (void)
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
-		gd->i2c1_clk = sys_info.freqSystemBus / 3;
-	else
 		gd->i2c1_clk = sys_info.freqSystemBus / 2;
+	else
+		gd->i2c1_clk = sys_info.freqSystemBus / 3;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
 	gd->i2c1_clk = sys_info.freqSystemBus / 2;

include/asm-ppc/immap_85xx.h

@@ -1552,6 +1552,13 @@ typedef struct par_io {
  */
 typedef struct ccsr_gur {
 	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
+#endif
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
 #define MPC85xx_PORBMSR_HA		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */

include/configs/MPC8536DS.h

@@ -59,7 +59,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-/* #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /\* ddrclk for MPC85xx *\/ FIXME-8536*/
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
 #define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
 					     from ICS307 instead of switches */
@@ -303,7 +303,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_ID_EEPROM
 #ifdef CONFIG_ID_EEPROM
-#define CONFIG_ID_EEPROM
 #define CFG_I2C_EEPROM_NXID
 #endif
 #define CFG_I2C_EEPROM_ADDR	0x57

include/configs/MPC8572DS.h

@@ -108,6 +108,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 
 /* I2C addresses of SPD EEPROMs */
+#define CFG_SPD_BUS_NUM		1	/* SPD EEPROMS locate on I2C bus 1 */
 #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
 #define SPD_EEPROM_ADDRESS2	0x52	/* CTLR 1 DIMM 0 */
 
@@ -293,11 +294,25 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CFG_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_NXID
+#endif
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_BUS_NUM	1
 
 /*
  * General PCI