diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile index 0228300..f8300c7 100644 --- a/arch/arm/cpu/armv7/ls102xa/Makefile +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -16,5 +16,5 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o obj-$(CONFIG_SPL) += spl.o ifdef CONFIG_ARMV7_PSCI -obj-y += psci.o +obj-y += psci.o ls102xa_psci.o endif diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c new file mode 100644 index 0000000..2ac2e6c --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c @@ -0,0 +1,236 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Author: Hongbo Zhang + * + * SPDX-License-Identifier: GPL-2.0+ + * This file implements LS102X platform PSCI SYSTEM-SUSPEND function + */ + +#include +#include +#include +#include +#include +#include "fsl_epu.h" + +#define __secure __attribute__((section("._secure.text"))) + +#define CCSR_GICD_CTLR 0x1000 +#define CCSR_GICC_CTLR 0x2000 +#define DCSR_RCPM_CG1CR0 0x31c +#define DCSR_RCPM_CSTTACR0 0xb00 +#define DCFG_CRSTSR_WDRFR 0x8 +#define DDR_RESV_LEN 128 + +#ifdef CONFIG_LS1_DEEP_SLEEP +/* + * DDR controller initialization training breaks the first 128 bytes of DDR, + * save them so that the bootloader can restore them while resuming. + */ +static void __secure ls1_save_ddr_head(void) +{ + const char *src = (const char *)CONFIG_SYS_SDRAM_BASE; + char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN); + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + int i; + + out_le32(&scfg->sparecr[2], dest); + + for (i = 0; i < DDR_RESV_LEN; i++) + *dest++ = *src++; +} + +static void __secure ls1_fsm_setup(void) +{ + void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *dcsr_rcpm_base = (void *)CONFIG_SYS_DCSR_RCPM_ADDR; + + out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001); + out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001); + + fsl_epu_setup((void *)dcsr_epu_base); + + /* Pull MCKE signal low before enabling deep sleep signal in FPGA */ + out_be32(dcsr_epu_base + EPECR0, 0x5); + out_be32(dcsr_epu_base + EPSMCR15, 0x76300000); +} + +static void __secure ls1_deepsleep_irq_cfg(void) +{ + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR; + u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0; + + /* Mask interrupts from GIC */ + out_be32(&rcpm->nfiqoutr, 0x0ffffffff); + out_be32(&rcpm->nirqoutr, 0x0ffffffff); + /* Mask deep sleep wake-up interrupts while entering deep sleep */ + out_be32(&rcpm->dsimskr, 0x0ffffffff); + + ippdexpcr0 = in_be32(&rcpm->ippdexpcr0); + /* + * Workaround: There is bug of register ippdexpcr1, when read it always + * returns zero, so its value is saved to a scrachpad register to be + * read, that is why we don't read it from register ippdexpcr1 itself. + */ + ippdexpcr1 = in_le32(&scfg->sparecr[7]); + + if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC) + pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 | + SCFG_PMCINTECR_ETSECRXG1 | + SCFG_PMCINTECR_ETSECERRG0 | + SCFG_PMCINTECR_ETSECERRG1; + + if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO) + pmcintecr |= SCFG_PMCINTECR_GPIO; + + if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART) + pmcintecr |= SCFG_PMCINTECR_LPUART; + + if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER) + pmcintecr |= SCFG_PMCINTECR_FTM; + + /* Always set external IRQ pins as wakeup source */ + pmcintecr |= SCFG_PMCINTECR_IRQ0 | SCFG_PMCINTECR_IRQ1; + + out_be32(&scfg->pmcintlecr, 0); + /* Clear PMC interrupt status */ + out_be32(&scfg->pmcintsr, 0xffffffff); + /* Enable wakeup interrupt during deep sleep */ + out_be32(&scfg->pmcintecr, pmcintecr); +} + +static void __secure ls1_delay(unsigned int loop) +{ + while (loop--) { + int i = 1000; + while (i--) + ; + } +} + +static void __secure ls1_start_fsm(void) +{ + void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *ccsr_gic_base = (void *)CONFIG_SYS_GIC_ADDR; + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + + /* Set HRSTCR */ + setbits_be32(&scfg->hrstcr, 0x80000000); + + /* Place DDR controller in self refresh mode */ + setbits_be32(&ddr->sdram_cfg_2, 0x80000000); + + ls1_delay(2000); + + /* Set EVT4_B to lock the signal MCKE down */ + out_be32(dcsr_epu_base + EPECR0, 0x0); + + ls1_delay(2000); + + out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0); + out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0); + + /* Enable all EPU Counters */ + setbits_be32(dcsr_epu_base + EPGCR, 0x80000000); + + /* Enable SCU15 */ + setbits_be32(dcsr_epu_base + EPECR15, 0x90000004); + + /* Enter WFI mode, and EPU FSM will start */ + __asm__ __volatile__ ("wfi" : : : "memory"); + + /* NEVER ENTER HERE */ + while (1) + ; +} + +static void __secure ls1_deep_sleep(u32 entry_point) +{ + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR; +#ifdef QIXIS_BASE + u32 tmp; + void *qixis_base = (void *)QIXIS_BASE; +#endif + + /* Enable cluster to enter the PCL10 state */ + out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN); + + /* Save the first 128 bytes of DDR data */ + ls1_save_ddr_head(); + + /* Save the kernel resume entry */ + out_le32(&scfg->sparecr[3], entry_point); + + /* Request to put cluster 0 in PCL10 state */ + setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0); + + /* Setup the registers of the EPU FSM for deep sleep */ + ls1_fsm_setup(); + +#ifdef QIXIS_BASE + /* Connect the EVENT button to IRQ in FPGA */ + tmp = in_8(qixis_base + QIXIS_CTL_SYS); + tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK; + tmp |= QIXIS_CTL_SYS_EVTSW_IRQ; + out_8(qixis_base + QIXIS_CTL_SYS, tmp); + + /* Enable deep sleep signals in FPGA */ + tmp = in_8(qixis_base + QIXIS_PWR_CTL2); + tmp |= QIXIS_PWR_CTL2_PCTL; + out_8(qixis_base + QIXIS_PWR_CTL2, tmp); + + /* Pull down PCIe RST# */ + tmp = in_8(qixis_base + QIXIS_RST_FORCE_3); + tmp |= QIXIS_RST_FORCE_3_PCIESLOT1; + out_8(qixis_base + QIXIS_RST_FORCE_3, tmp); +#endif + + /* Enable Warm Device Reset */ + setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN); + setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR); + + ls1_deepsleep_irq_cfg(); + + psci_v7_flush_dcache_all(); + + ls1_start_fsm(); +} + +#else +static void __secure ls1_sleep(void) +{ + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR; + +#ifdef QIXIS_BASE + u32 tmp; + void *qixis_base = (void *)QIXIS_BASE; + + /* Connect the EVENT button to IRQ in FPGA */ + tmp = in_8(qixis_base + QIXIS_CTL_SYS); + tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK; + tmp |= QIXIS_CTL_SYS_EVTSW_IRQ; + out_8(qixis_base + QIXIS_CTL_SYS, tmp); +#endif + + /* Enable cluster to enter the PCL10 state */ + out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN); + + setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ); + + __asm__ __volatile__ ("wfi" : : : "memory"); +} +#endif + +void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id) +{ +#ifdef CONFIG_LS1_DEEP_SLEEP + ls1_deep_sleep(entry_point); +#else + ls1_sleep(); +#endif +} diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S index 8f38680..3d41d37 100644 --- a/arch/arm/cpu/armv7/ls102xa/psci.S +++ b/arch/arm/cpu/armv7/ls102xa/psci.S @@ -29,6 +29,7 @@ #define PSCI_FN_AFFINITY_INFO_FEATURE_MASK 0x0 #define PSCI_FN_SYSTEM_OFF_FEATURE_MASK 0x0 #define PSCI_FN_SYSTEM_RESET_FEATURE_MASK 0x0 +#define PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK 0x0 .pushsection ._secure.text, "ax" @@ -61,6 +62,8 @@ _ls102x_psci_supported_table: .word PSCI_FN_SYSTEM_OFF_FEATURE_MASK .word ARM_PSCI_0_2_FN_SYSTEM_RESET .word PSCI_FN_SYSTEM_RESET_FEATURE_MASK + .word ARM_PSCI_1_0_FN_SYSTEM_SUSPEND + .word PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK .word 0 .word ARM_PSCI_RET_NI @@ -243,4 +246,12 @@ psci_system_reset: 1: wfi b 1b +.globl psci_system_suspend +psci_system_suspend: + push {lr} + + bl ls1_system_suspend + + pop {pc} + .popsection diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c index 71ed15e..16fd445 100644 --- a/board/freescale/common/arm_sleep.c +++ b/board/freescale/common/arm_sleep.c @@ -66,6 +66,36 @@ static void dp_ddr_restore(void) *dst++ = *src++; } +#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA) +void ls1_psci_resume_fixup(void) +{ + u32 tmp; + struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; + +#ifdef QIXIS_BASE + void *qixis_base = (void *)QIXIS_BASE; + + /* Pull on PCIe RST# */ + out_8(qixis_base + QIXIS_RST_FORCE_3, 0); + + /* disable deep sleep signals in FPGA */ + tmp = in_8(qixis_base + QIXIS_PWR_CTL2); + tmp &= ~QIXIS_PWR_CTL2_PCTL; + out_8(qixis_base + QIXIS_PWR_CTL2, tmp); +#endif + + /* Disable wakeup interrupt during deep sleep */ + out_be32(&scfg->pmcintecr, 0); + /* Clear PMC interrupt status */ + out_be32(&scfg->pmcintsr, 0xffffffff); + + /* Disable Warm Device Reset */ + tmp = in_be32(&scfg->dpslpcr); + tmp &= ~SCFG_DPSLPCR_WDRR_EN; + out_be32(&scfg->dpslpcr, tmp); +} +#endif + static void dp_resume_prepare(void) { dp_ddr_restore(); @@ -74,6 +104,9 @@ static void dp_resume_prepare(void) #ifdef CONFIG_U_QE u_qe_resume(); #endif +#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA) + ls1_psci_resume_fixup(); +#endif } int fsl_dp_resume(void) @@ -88,7 +121,7 @@ int fsl_dp_resume(void) dp_resume_prepare(); /* Get the entry address and jump to kernel */ - start_addr = in_le32(&scfg->sparecr[1]); + start_addr = in_le32(&scfg->sparecr[3]); debug("Entry address is 0x%08x\n", start_addr); kernel_resume = (void (*)(void))start_addr; secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0); diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 7a256da..5aaecc7 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -10,6 +10,7 @@ #define CONFIG_LS102XA #define CONFIG_ARMV7_PSCI_1_0 +#define CONFIG_LS1_DEEP_SLEEP #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 90ae770..ef238a4 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -10,6 +10,7 @@ #define CONFIG_LS102XA #define CONFIG_ARMV7_PSCI_1_0 +#define CONFIG_LS1_DEEP_SLEEP #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR