diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 102e6ff..ec74fd3 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -31,6 +31,9 @@ #include #endif +#include +#include + DECLARE_GLOBAL_DATA_PTR; extern int mpc5121_diu_init(void); @@ -38,24 +41,48 @@ extern void ide_set_reset(int idereset); /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ CLOCK_SCCR1_DDR_EN | \ CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_NFC_EN | \ CLOCK_SCCR1_PATA_EN | \ CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ CLOCK_SCCR1_TPR_EN) -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN | \ + CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN) #define CSAW_START(start) ((start) & 0xFFFF0000) #define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) long int fixed_sdram(void); +void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip); + +/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */ +extern int mpc5121_nfc_chip; + +/* Control chips select signal on MPC5121ADS board */ +void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) +{ + unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09; + u8 v; + + v = in_8(csreg); + v |= 0x0F; + + if (chip >= 0) { + __mpc5121_nfc_select_chip(mtd, 0); + v &= ~(1 << mpc5121_nfc_chip); + } else { + __mpc5121_nfc_select_chip(mtd, -1); + } + + out_8(csreg, v); +} int board_early_init_f (void) { diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index dff7f1a..45a004e 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -200,6 +200,26 @@ #undef CONFIG_SYS_FLASH_CHECKSUM /* + * NAND FLASH + * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only) + */ +#define CONFIG_CMD_NAND +#define CONFIG_NAND_MPC5121_NFC +#define CONFIG_SYS_NAND_BASE 0x40000000 + +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ + +/* + * Configuration parameters for MPC5121 NAND driver + */ +#define CONFIG_FSL_NFC_WIDTH 1 +#define CONFIG_FSL_NFC_WRITE_SIZE 2048 +#define CONFIG_FSL_NFC_SPARE_SIZE 64 +#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE + +/* * CPLD registers area is really only 32 bytes in size, but the smallest possible LP * window is 64KB */ @@ -222,7 +242,7 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ #else