usb:ehci-mx6 add phy mode query function

usb_phy_enable should return status bit, but not phy mode bit, thus
add a new function usb_phy_mode to query the PHY for it's mode and
make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'.

Include a new board weak function board_usb_phy_mode. If board code
does not reimplement this function, it just call usb_phy_mode and return
usb_phy_mode's return value. The reason to include such a weak function
is: " SOC OTG core <--connect--> board HOST port, but no pin id for
the board host port, so board can not use usb_phy_mode to return the
phy mode, but define it's own rule."

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>

drivers/usb/host/ehci-mx6.c

@@ -160,7 +160,7 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci)
 	val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
 	__raw_writel(val, phy_ctrl);
 
-	return val & USBPHY_CTRL_OTG_ID;
+	return 0;
 }
 
 /* Base address for this IP block is 0x02184800 */
@@ -193,6 +193,28 @@ static void usb_oc_config(int index)
 	__raw_writel(val, ctrl);
 }
 
+int usb_phy_mode(int port)
+{
+	void __iomem *phy_reg;
+	void __iomem *phy_ctrl;
+	u32 val;
+
+	phy_reg = (void __iomem *)phy_bases[port];
+	phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+
+	val = __raw_readl(phy_ctrl);
+
+	if (val & USBPHY_CTRL_OTG_ID)
+		return USB_INIT_DEVICE;
+	else
+		return USB_INIT_HOST;
+}
+
+int __weak board_usb_phy_mode(int port)
+{
+	return usb_phy_mode(port);
+}
+
 int __weak board_ehci_hcd_init(int port)
 {
 	return 0;
@@ -221,7 +243,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 	usb_power_config(index);
 	usb_oc_config(index);
 	usb_internal_phy_clock_gate(index, 1);
-	type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+	usb_phy_enable(index, ehci);
+	type = board_usb_phy_mode(index);
 
 	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
 	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +

include/usb/ehci-fsl.h

@@ -277,7 +277,9 @@ struct usb_ehci {
 #define MXC_EHCI_IPPUE_DOWN		(1 << 10)
 #define MXC_EHCI_IPPUE_UP		(1 << 11)
 
+int usb_phy_mode(int port);
 /* Board-specific initialization */
 int board_ehci_hcd_init(int port);
+int board_usb_phy_mode(int port);
 
 #endif /* _EHCI_FSL_H */