board: sama5d4ek: enable early debug UART

Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>

board/atmel/sama5d4ek/sama5d4ek.c

@@ -15,6 +15,7 @@
 #include <asm/arch/sama5d3_smc.h>
 #include <asm/arch/sama5d4.h>
 #include <atmel_hlcdc.h>
+#include <debug_uart.h>
 #include <lcd.h>
 #include <nand.h>
 #include <version.h>
@@ -161,6 +162,7 @@ void lcd_show_board_info(void)
 
 #endif /* CONFIG_LCD */
 
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void sama5d4ek_serial3_hw_init(void)
 {
 	at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1);	/* TXD3 */
@@ -170,12 +172,21 @@ static void sama5d4ek_serial3_hw_init(void)
 	at91_periph_clk_enable(ATMEL_ID_USART3);
 }
 
-int board_early_init_f(void)
+void board_debug_uart_init(void)
 {
 	sama5d4ek_serial3_hw_init();
+}
+#endif
 
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
 	return 0;
 }
+#endif
 
 int board_init(void)
 {

configs/sama5d4ek_mmc_defconfig

@@ -56,6 +56,12 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y

configs/sama5d4ek_nandflash_defconfig

@@ -54,6 +54,12 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y

configs/sama5d4ek_spiflash_defconfig

@@ -53,6 +53,12 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y