Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge git://www.denx.de/git/u-boot-marvell

Browse Source
lime2-spi
Tom Rini 7 years ago
parent 00ef2cd6c7 f6e62ee04c
commit 233719cc40
32 changed files with 2459 additions and 13 deletions
  1. 88
      arch/arm/dts/kirkwood-6192.dtsi
  2. 90
      arch/arm/dts/kirkwood-6281.dtsi
  3. 53
      arch/arm/dts/kirkwood-98dx4122.dtsi
  4. 172
      arch/arm/dts/kirkwood-blackarmor-nas220.dts
  5. 63
      arch/arm/dts/kirkwood-dns325.dts
  6. 235
      arch/arm/dts/kirkwood-dnskw.dtsi
  7. 110
      arch/arm/dts/kirkwood-dockstar.dts
  8. 190
      arch/arm/dts/kirkwood-goflexnet.dts
  9. 133
      arch/arm/dts/kirkwood-guruplug-server-plus.dts
  10. 146
      arch/arm/dts/kirkwood-ib62x0.dts
  11. 195
      arch/arm/dts/kirkwood-iconnect.dts
  12. 39
      arch/arm/dts/kirkwood-openrd-base.dts
  13. 73
      arch/arm/dts/kirkwood-openrd-client.dts
  14. 55
      arch/arm/dts/kirkwood-openrd-ultimate.dts
  15. 122
      arch/arm/dts/kirkwood-openrd.dtsi
  16. 132
      arch/arm/dts/kirkwood-pogo_e02.dts
  17. 104
      arch/arm/dts/kirkwood-sheevaplug-common.dtsi
  18. 42
      arch/arm/dts/kirkwood-sheevaplug.dts
  19. 393
      arch/arm/dts/kirkwood.dtsi
  20. 3
      configs/dns325_defconfig
  21. 3
      configs/dockstar_defconfig
  22. 3
      configs/goflexhome_defconfig
  23. 3
      configs/guruplug_defconfig
  24. 3
      configs/ib62x0_defconfig
  25. 3
      configs/iconnect_defconfig
  26. 3
      configs/nas220_defconfig
  27. 3
      configs/openrd_base_defconfig
  28. 3
      configs/openrd_client_defconfig
  29. 3
      configs/openrd_ultimate_defconfig
  30. 3
      configs/pogo_e02_defconfig
  31. 3
      configs/sheevaplug_defconfig
  32. 1
      drivers/net/Kconfig

88
arch/arm/dts/kirkwood-6192.dtsi
Unescape View File

@ -0,0 +1,88 @@
// SPDX-License-Identifier: GPL-2.0
/ {
mbus@f1000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
compatible = "marvell,88f6192-pinctrl";
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
marvell,function = "sdio";
};
};
rtc: rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
phys = <&sata_phy0>, <&sata_phy1>;
phy-names = "port0", "port1";
status = "disabled";
};
sdio: mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
clocks = <&gate_clk 4>;
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
status = "disabled";
};
};
};

90
arch/arm/dts/kirkwood-6281.dtsi
Unescape View File

@ -0,0 +1,90 @@
// SPDX-License-Identifier: GPL-2.0
/ {
mbus@f1000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
compatible = "marvell,88f6281-pinctrl";
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
marvell,function = "sdio";
};
};
rtc: rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
phys = <&sata_phy0>, <&sata_phy1>;
phy-names = "port0", "port1";
status = "disabled";
};
sdio: mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
clocks = <&gate_clk 4>;
pinctrl-0 = <&pmx_sdio>;
pinctrl-names = "default";
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
status = "disabled";
};
};
};

53
arch/arm/dts/kirkwood-98dx4122.dtsi
Unescape View File

@ -0,0 +1,53 @@
// SPDX-License-Identifier: GPL-2.0
/ {
mbus@f1000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
compatible = "marvell,98dx4122-pinctrl";
};
};
};
&sata_phy0 {
status = "disabled";
};
&sata_phy1 {
status = "disabled";
};

172
arch/arm/dts/kirkwood-blackarmor-nas220.dts
Unescape View File

@ -0,0 +1,172 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for Seagate Blackarmor NAS220
*
* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "kirkwood.dtsi"
#include "kirkwood-6192.dtsi"
/ {
model = "Seagate Blackarmor NAS220";
compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
"marvell,kirkwood";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
gpio_keys {
compatible = "gpio-keys";
reset {
label = "Reset";
linux,code = <KEY_POWER>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
button {
label = "Power";
linux,code = <KEY_SLEEP>;
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
blue-power {
label = "nas220:blue:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
pinctrl-names = "default";
sata0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
sata1_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
};
/*
* Serial port routed to connector CN5
*
* pin 1 - TX (CPU's TX)
* pin 4 - RX (CPU's RX)
* pin 6 - GND
*/
&uart0 {
status = "okay";
};
&pinctrl {
pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
pinctrl-names = "default";
pmx_act_sata0: pmx-act-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
};
pmx_act_sata1: pmx-act-sata1 {
marvell,pins = "mpp16";
marvell,function = "sata1";
};
pmx_power_sata0: pmx-power-sata0 {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_power_sata1: pmx-power-sata1 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_button_power: pmx-button-power {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
};
&sata {
status = "okay";
nr-ports = <2>;
};
&i2c0 {
status = "okay";
adt7476: thermal@2e {
compatible = "adi,adt7476";
reg = <0x2e>;
};
};
&nand {
status = "okay";
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

63
arch/arm/dts/kirkwood-dns325.dts
Unescape View File

@ -0,0 +1,63 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";
compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
&pmx_led_red_left_hdd &pmx_led_red_right_hdd
&pmx_led_white_usb>;
pinctrl-names = "default";
white-power {
label = "dns325:white:power";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
white-usb {
label = "dns325:white:usb";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
};
red-l_hdd {
label = "dns325:red:l_hdd";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
red-r_hdd {
label = "dns325:red:r_hdd";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
red-usb {
label = "dns325:red:usb";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
ocp@f1000000 {
i2c@11000 {
status = "okay";
lm75: lm75@48 {
compatible = "national,lm75";
reg = <0x48>;
};
};
serial@12000 {
status = "okay";
};
};
};

235
arch/arm/dts/kirkwood-dnskw.dtsi
Unescape View File

@ -0,0 +1,235 @@
// SPDX-License-Identifier: GPL-2.0
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS NASes (kirkwood-based)";
compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_power &pmx_button_unmount
&pmx_button_reset>;
pinctrl-names = "default";
power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
eject {
label = "USB unmount button";
linux,code = <KEY_EJECTCD>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
gpio_fan {
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW
&gpio1 13 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
&pmx_present_sata1 &pmx_fan_tacho
&pmx_temp_alarm>;
pinctrl-names = "default";
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp20";
marvell,function = "sata1";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
pmx_led_red_right_hdd: pmx-led-red-right-hdd {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_led_red_left_hdd: pmx-led-red-left-hdd {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_red_usb_325: pmx-led-red-usb-325 {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_button_power: pmx-button-power {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_led_red_usb_320: pmx-led-red-usb-320 {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
pmx_power_off: pmx-power-off {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_power_back_on: pmx-power-back-on {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_power_sata0: pmx-power-sata0 {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_power_sata1: pmx-power-sata1 {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_present_sata0: pmx-present-sata0 {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_present_sata1: pmx-present-sata1 {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_led_white_usb: pmx-led-white-usb {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_fan_tacho: pmx-fan-tacho {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_fan_high_speed: pmx-fan-high-speed {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_fan_low_speed: pmx-fan-low-speed {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_button_unmount: pmx-button-unmount {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_temp_alarm: pmx-temp-alarm {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
sata@80000 {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
pinctrl-names = "default";
sata0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 7 0>;
};
sata1_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 8 0>;
};
};
};
&nand {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

110
arch/arm/dts/kirkwood-dockstar.dts
Unescape View File

@ -0,0 +1,110 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Seagate FreeAgent Dockstar";
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_green: pmx-led-green {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led-orange {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
pinctrl-names = "default";
health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 0>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "data";
reg = <0x0500000 0xfb00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88e1116";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

190
arch/arm/dts/kirkwood-goflexnet.dts
Unescape View File

@ -0,0 +1,190 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Seagate GoFlex Net";
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_right_cap_0: pmx-led_right_cap_0 {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_right_cap_1: pmx-led_right_cap_1 {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_right_cap_2: pmx-led_right_cap_2 {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_right_cap_3: pmx-led_right_cap_3 {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_left_cap_0: pmx-led_left_cap_0 {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_led_left_cap_1: pmx-led_left_cap_1 {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_led_left_cap_2: pmx-led_left_cap_2 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_left_cap_3: pmx-led_left_cap_3 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_green: pmx-led_green {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led_orange {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_orange
&pmx_led_left_cap_0 &pmx_led_left_cap_1
&pmx_led_left_cap_2 &pmx_led_left_cap_3
&pmx_led_right_cap_0 &pmx_led_right_cap_1
&pmx_led_right_cap_2 &pmx_led_right_cap_3
>;
pinctrl-names = "default";
health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
left0 {
label = "status:white:left0";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
left1 {
label = "status:white:left1";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
left2 {
label = "status:white:left2";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
left3 {
label = "status:white:left3";
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
right0 {
label = "status:white:right0";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
right1 {
label = "status:white:right1";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
right2 {
label = "status:white:right2";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
right3 {
label = "status:white:right3";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0xd800000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

133
arch/arm/dts/kirkwood-guruplug-server-plus.dts
Unescape View File

@ -0,0 +1,133 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Guruplug Server Plus";
compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_health_r: pmx-led-health-r {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_health_g: pmx-led-health-g {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_wmode_r: pmx-led-wmode-r {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_wmode_g: pmx-led-wmode-g {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
/* AzureWave AW-GH381 WiFi/BT */
mvsdio@90000 {
status = "okay";
non-removable;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
&pmx_led_wmode_r &pmx_led_wmode_g >;
pinctrl-names = "default";
health-r {
label = "guruplug:red:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
health-g {
label = "guruplug:green:health";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wmode-r {
label = "guruplug:red:wmode";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wmode-g {
label = "guruplug:green:wmode";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x00100000 0x00400000>;
};
partition@500000 {
label = "data";
reg = <0x00500000 0x1fb00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
phy-connection-type = "rgmii-id";
};
};

146
arch/arm/dts/kirkwood-ib62x0.dts
Unescape View File

@ -0,0 +1,146 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_os_red: pmx-led-os-red {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_power_off: pmx-power-off {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_led_os_green: pmx-led-os-green {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
pmx_led_usb_transfer: pmx-led-usb-transfer {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_button_usb_copy: pmx-button-usb-copy {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
pinctrl-names = "default";
copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
&pmx_led_usb_transfer>;
pinctrl-names = "default";
green-os {
label = "ib62x0:green:os";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
red-os {
label = "ib62x0:red:os";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
usb-copy {
label = "ib62x0:red:usb_copy";
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0xe0000>;
};
partition@e0000 {
label = "u-boot environment";
reg = <0xe0000 0x20000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x600000>;
};
partition@700000 {
label = "root";
reg = <0x0700000 0xf900000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

195
arch/arm/dts/kirkwood-iconnect.dts
Unescape View File

@ -0,0 +1,195 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Iomega Iconnect";
compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
linux,initrd-start = <0x4500040>;
linux,initrd-end = <0x4800000>;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_button_otb: pmx-button-otb {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
pmx_led_level: pmx-led-level {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_power_blue: pmx-led-power-blue {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_led_power_red: pmx-power-red {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_led_usb1: pmx-led-usb1 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_usb2: pmx-led-usb2 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_usb3: pmx-led-usb3 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_usb4: pmx-led-usb4 {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_otb: pmx-led-otb {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm63: lm63@4c {
compatible = "national,lm63";
reg = <0x4c>;
};
};
serial@12000 {
status = "ok";
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
&pmx_led_power_red &pmx_led_usb1
&pmx_led_usb2 &pmx_led_usb3
&pmx_led_usb4 &pmx_led_otb >;
pinctrl-names = "default";
led-level {
label = "led_level";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
power-blue {
label = "power:blue";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power-red {
label = "power:red";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "usb1:blue";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "usb2:blue";
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3:blue";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "usb4:blue";
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
otb {
label = "otb:blue";
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
pinctrl-names = "default";
otb {
label = "OTB Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0xc0000>;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
};
partition@100000 {
label = "zImage";
reg = <0x100000 0x300000>;
};
partition@540000 {
label = "initrd";
reg = <0x540000 0x300000>;
};
partition@980000 {
label = "boot";
reg = <0x980000 0x1f400000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@11 {
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};

39
arch/arm/dts/kirkwood-openrd-base.dts
Unescape View File

@ -0,0 +1,39 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Base Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* base variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Base";
compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
serial@12100 {
status = "okay";
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

73
arch/arm/dts/kirkwood-openrd-client.dts
Unescape View File

@ -0,0 +1,73 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Client Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* client variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Client";
compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
audio-controller@a0000 {
status = "okay";
};
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
#sound-dai-cells = <0>;
};
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&audio0 0>;
};
simple-audio-card,codec {
sound-dai = <&cs42l51>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
ethphy1: ethernet-phy@24 {
reg = <24>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};

55
arch/arm/dts/kirkwood-openrd-ultimate.dts
Unescape View File

@ -0,0 +1,55 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Ultimate Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* ultimate variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Ultimate";
compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};

122
arch/arm/dts/kirkwood-openrd.dtsi
Unescape View File

@ -0,0 +1,122 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD (Base|Client|Ultimate) Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are common between the three
* variants of the Marvell Kirkwood Development Board.
*/
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
pinctrl-names = "default";
pmx_select28: pmx-select-rs232-rs485 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_select34: pmx-select-uart-sd {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
mvsdio@90000 {
status = "okay";
cd-gpios = <&gpio0 29 9>;
};
gpio@10100 {
p28 {
gpio-hog;
gpios = <28 GPIO_ACTIVE_HIGH>;
/*
* SelRS232or485 selects between RS-232 or RS-485
* mode for the second UART.
*
* Low: RS-232
* High: RS-485
*
* To use the second UART, you need to change also
* the SelUARTorSD.
*/
output-low;
line-name = "SelRS232or485";
};
};
gpio@10140 {
p2 {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
/*
* SelUARTorSD selects between the second UART
* (serial@12100) and SD (mvsdio@90000).
*
* Low: UART
* High: SD
*
* When changing this line make sure the newly
* selected device node is enabled and the
* previously selected device node is disabled.
*/
output-high; /* Select SD by default */
line-name = "SelUARTorSD";
};
};
};
};
&nand {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@600000 {
label = "root";
reg = <0x0600000 0x1FA00000>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};

132
arch/arm/dts/kirkwood-pogo_e02.dts
Unescape View File

@ -0,0 +1,132 @@
// SPDX-License-Identifier: GPL-2.0
/*
* kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
*
* Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
*
* based on information of dts files from
* Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
* OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
*
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Cloud Engines Pogoplug E02";
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
gpio-leds {
compatible = "gpio-leds";
health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {
pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
&pmx_led_green >;
pinctrl-names = "default";
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_green: pmx-led-green {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led-orange {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
&uart0 {
status = "okay";
};
&nand {
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0x5b00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

104
arch/arm/dts/kirkwood-sheevaplug-common.dtsi
Unescape View File

@ -0,0 +1,104 @@
// SPDX-License-Identifier: GPL-2.0
/*
* kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*/
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_red: pmx-led-red {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_blue: pmx-led-blue {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_sdio_wp: pmx-sdio-wp {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 0>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x0500000 0x1fb00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

42
arch/arm/dts/kirkwood-sheevaplug.dts
Unescape View File

@ -0,0 +1,42 @@
// SPDX-License-Identifier: GPL-2.0
/*
* kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*/
/dts-v1/;
#include "kirkwood-sheevaplug-common.dtsi"
/ {
model = "Globalscale Technologies SheevaPlug";
compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
pinctrl-names = "default";
health {
label = "sheevaplug:blue:health";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
misc {
label = "sheevaplug:red:misc";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
};

393
arch/arm/dts/kirkwood.dtsi
Unescape View File

@ -0,0 +1,393 @@
// SPDX-License-Identifier: GPL-2.0
/include/ "skeleton.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "marvell,feroceon";
reg = <0>;
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
clock-names = "cpu_clk", "ddrclk", "powersave";
};
};
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
i2c0 = &i2c0;
};
mbus@f1000000 {
compatible = "marvell,kirkwood-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* If a board file needs to change this ranges it must replace it completely */
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
nand: nand@12f {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
ale = <1>;
bank-width = <1>;
compatible = "marvell,orion-nand";
reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "disabled";
};
crypto_sram: sa-sram@301 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
clocks = <&gate_clk 17>;
#address-cells = <1>;
#size-cells = <1>;
};
};
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0x00000000 0xf1000000 0x0100000>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl: pin-controller@10000 {
/* set compatible property in SoC file */
reg = <0x10000 0x20>;
pmx_ge1: pmx-ge1 {
marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
"mpp24", "mpp25", "mpp26", "mpp27",
"mpp30", "mpp31", "mpp32", "mpp33";
marvell,function = "ge1";
};
pmx_nand: pmx-nand {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp18", "mpp19";
marvell,function = "nand";
};
/*
* Default SPI0 pinctrl setting with CSn on mpp0,
* overwrite marvell,pins on board level if required.
*/
pmx_spi: pmx-spi {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
marvell,function = "spi";
};
pmx_twsi0: pmx-twsi0 {
marvell,pins = "mpp8", "mpp9";
marvell,function = "twsi0";
};
/*
* Default UART pinctrl setting without RTS/CTS,
* overwrite marvell,pins on board level if required.
*/
pmx_uart0: pmx-uart0 {
marvell,pins = "mpp10", "mpp11";
marvell,function = "uart0";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp13", "mpp14";
marvell,function = "uart1";
};
};
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
#clock-cells = <1>;
};
spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <23>;
reg = <0x10600 0x28>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
status = "disabled";
};
gpio0: gpio@10100 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10140 0x40>;
ngpios = <18>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
clocks = <&gate_clk 7>;
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <29>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_twsi0>;
pinctrl-names = "default";
status = "disabled";
};
uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "disabled";
};
uart1: serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "disabled";
};
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x80>, <0x1500 0x20>;
};
sysc: system-controller@20000 {
compatible = "marvell,orion-system-controller";
reg = <0x20000 0x120>;
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <1>;
marvell,#interrupts = <6>;
};
gate_clk: clock-gating-control@2011c {
compatible = "marvell,kirkwood-gating-clock";
reg = <0x2011c 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
l2: l2-cache@20128 {
compatible = "marvell,kirkwood-cache";
reg = <0x20128 0x4>;
};
intc: main-interrupt-ctrl@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20200 0x10>, <0x20210 0x10>;
};
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
wdt: watchdog-timer@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>, <0x20108 0x4>;
interrupt-parent = <&bridge_intc>;
interrupts = <3>;
clocks = <&gate_clk 7>;
status = "okay";
};
cesa: crypto@30000 {
compatible = "marvell,kirkwood-crypto";
reg = <0x30000 0x10000>;
reg-names = "regs";
interrupts = <22>;
clocks = <&gate_clk 17>;
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x800>;
status = "okay";
};
usb0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
clocks = <&gate_clk 3>;
status = "okay";
};
dma0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
status = "okay";
clocks = <&gate_clk 8>;
xor00 {
interrupts = <5>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <6>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
dma1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60B00 0x100>;
status = "okay";
clocks = <&gate_clk 16>;
xor00 {
interrupts = <7>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <8>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
eth0: ethernet-controller@72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 0>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
eth0port: ethernet0-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <46>;
clocks = <&gate_clk 0>;
status = "disabled";
/* add phy nodes in board file */
};
eth1: ethernet-controller@76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76000 0x4000>;
clocks = <&gate_clk 19>;
marvell,tx-checksum-limit = <1600>;
pinctrl-0 = <&pmx_ge1>;
pinctrl-names = "default";
status = "disabled";
eth1port: ethernet1-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
sata_phy0: sata-phy@82000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0x82000 0x0334>;
clocks = <&gate_clk 14>;
clock-names = "sata";
#phy-cells = <0>;
status = "ok";
};
sata_phy1: sata-phy@84000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0x84000 0x0334>;
clocks = <&gate_clk 15>;
clock-names = "sata";
#phy-cells = <0>;
status = "ok";
};
audio0: audio-controller@a0000 {
compatible = "marvell,kirkwood-audio";
#sound-dai-cells = <0>;
reg = <0xa0000 0x2210>;
interrupts = <24>;
clocks = <&gate_clk 9>;
clock-names = "internal";
status = "disabled";
};
};
};

3
configs/dns325_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_DNS325=y
CONFIG_IDENT_STRING="\nD-Link DNS-325"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325"
CONFIG_BOOTDELAY=3
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_BOARDINFO is not set
@ -23,6 +24,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
@ -32,4 +34,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/dockstar_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_DOCKSTAR=y
CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dockstar"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="DockStar> "
@ -19,6 +20,7 @@ CONFIG_CMD_JFFS2=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),-(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
# CONFIG_MMC is not set
CONFIG_NETDEVICES=y
@ -27,4 +29,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/goflexhome_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_GOFLEXHOME=y
CONFIG_IDENT_STRING="\nSeagate GoFlex Home"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet"
CONFIG_BOOTDELAY=3
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_BOARDINFO is not set
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/guruplug_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_GURUPLUG=y
CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
@ -34,4 +36,3 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_OF_LIBFDT=y

3
configs/ib62x0_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_IB62X0=y
CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ib62x0"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
@ -22,6 +23,7 @@ CONFIG_CMD_JFFS2=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
@ -32,4 +34,3 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_OF_LIBFDT=y

3
configs/iconnect_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_ICONNECT=y
CONFIG_IDENT_STRING=" Iomega iConnect"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-iconnect"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="iconnect => "
@ -18,6 +19,7 @@ CONFIG_CMD_JFFS2=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x80000@0x0(uboot),0x20000@0x80000(uboot_env),-@0xa0000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
# CONFIG_MMC is not set
CONFIG_NETDEVICES=y
@ -27,4 +29,3 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_OF_LIBFDT=y

3
configs/nas220_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_NAS220=y
CONFIG_IDENT_STRING="\nNAS 220"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
@ -24,6 +25,7 @@ CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_PARTITION_UUIDS is not set
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/openrd_base_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Base"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/openrd_client_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Client"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/openrd_ultimate_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/pogo_e02_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_POGO_E02=y
CONFIG_IDENT_STRING="\nPogo E02"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="PogoE02> "
@ -18,6 +19,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
# CONFIG_MMC is not set
CONFIG_NETDEVICES=y
@ -26,4 +28,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/sheevaplug_defconfig
Unescape View File

@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_SHEEVAPLUG=y
CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
@ -25,6 +26,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
CONFIG_NETDEVICES=y
@ -34,4 +36,3 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_OF_LIBFDT=y

1
drivers/net/Kconfig
Unescape View File

@ -181,7 +181,6 @@ config FTMAC100
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
depends on KIRKWOOD || ORION5X
select PHYLIB
help
This driver supports the network interface units in the
Marvell Orion5x and Kirkwood SoCs

Write Preview
Loading…
Cancel
Save