drivers: qe: Move CONFIG_U_QE to Kconfig

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[York S: revised subject line and removed commit message]
Reviewed-by: York Sun <york.sun@nxp.com>

drivers/Kconfig

@@ -74,6 +74,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/pwm/Kconfig"
 
+source "drivers/qe/Kconfig"
+
 source "drivers/ram/Kconfig"
 
 source "drivers/remoteproc/Kconfig"

drivers/qe/Kconfig

@@ -0,0 +1,12 @@
+#
+# QUICC Engine Drivers
+#
+config U_QE
+	bool "Enable support for U QUICC Engine"
+	default y if (ARCH_LS1021A && !SD_BOOT && !NAND_BOOT && !QSPI_BOOT) \
+		|| (TARGET_T1024QDS) \
+		|| (TARGET_T1024RDB) \
+		|| (TARGET_T1040QDS && !NOBQFMAN) \
+		|| (TARGET_LS1043ARDB && !SPL_NO_QE && !NAND_BOOT && !QSPI_BOOT)
+	help
+	  Choose this option to add support for U QUICC Engine.

include/configs/T102xQDS.h

@@ -659,7 +659,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 
 #define CONFIG_QE
-#define CONFIG_U_QE
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
 /*

include/configs/T102xRDB.h

@@ -669,7 +669,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_TARGET_T1024RDB
 #define CONFIG_QE
-#define CONFIG_U_QE
 #endif
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)

include/configs/T1040QDS.h

@@ -549,7 +549,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_PME
 
 #define CONFIG_QE
-#define CONFIG_U_QE
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*

include/configs/ls1021aqds.h

@@ -107,7 +107,6 @@ unsigned long get_board_ddr_clk(void);
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 

include/configs/ls1021atwr.h

@@ -106,7 +106,6 @@
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 

include/configs/ls1043ardb.h

@@ -268,13 +268,6 @@
 #endif
 #endif
 
-/* QE */
-#ifndef SPL_NO_QE
-#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
-#endif
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #ifndef CONFIG_CMD_EXT2

scripts/config_whitelist.txt

@@ -4635,7 +4635,6 @@ CONFIG_USE_SPIFLASH
 CONFIG_UTBIPAR_INIT_TBIPA
 CONFIG_U_BOOT_HDR_ADDR
 CONFIG_U_BOOT_HDR_SIZE
-CONFIG_U_QE
 CONFIG_VAL
 CONFIG_VAR_SIZE_SPL
 CONFIG_VCT_NOR