armv8: fsl-layerscape: Move DDR config options to Kconfig

Move DDR3, DDR4 and realted options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
8 years ago · 24aaa09452
parent f534b8f5fd
commit 24aaa09452
16 changed files with 73 additions and 32 deletions
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@ -1,24 +1,33 @@
 config ARCH_LS1012A
 	bool
 	select FSL_LSCH2
+	select SYS_FSL_DDR_BE
 	select SYS_FSL_MMDC
 	select SYS_FSL_ERRATUM_A010315

 config ARCH_LS1043A
 	bool
 	select FSL_LSCH2
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A010539

 config ARCH_LS1046A
 	bool
 	select FSL_LSCH2
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_DDR4
+	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_SRDS_2

 config ARCH_LS2080A
 	bool
 	select FSL_LSCH3
+	select SYS_FSL_DDR4
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_HAS_DP_DDR
 	select SYS_FSL_SRDS_2

@ -81,4 +90,49 @@ config SYS_FSL_SRDS_2
 config SYS_HAS_SERDES
 	bool

+config SYS_FSL_DDR
+	bool "Freescale DDR driver"
+	help
+	  Select Freescale General DDR driver, shared between most Freescale
+	  PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
+	  based Layerscape SoCs (such as ls2080a).
+
+config SYS_FSL_DDR_BE
+	bool
+	help
+	  Access DDR registers in big-endian.
+
+config SYS_FSL_DDR_LE
+	bool
+	help
+	  Access DDR registers in little-endian.
+
+config SYS_FSL_DDR_VER
+	int
+	default 50 if SYS_FSL_DDR_VER_50
+
+config SYS_FSL_DDR_VER_50
+	bool
+
+config SYS_FSL_DDRC_ARM_GEN3
+	bool
+
+config SYS_FSL_DDRC_GEN4
+	bool
+
+config SYS_FSL_DDR3
+	bool "Freescale DDR3 controller"
+	depends on !SYS_FSL_DDR4
+	select SYS_FSL_DDR
+	select SYS_FSL_DDRC_ARM_GEN3
+	help
+	  Enable Freescale DDR3 controller on ARM-based SoCs.
+
+config SYS_FSL_DDR4
+	bool "Freescale DDR4 controller"
+	select SYS_FSL_DDR
+	select SYS_FSL_DDRC_GEN4
+	help
+	  Enable Freescale DDR4 controller.
+
 endmenu
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@ -12,17 +12,6 @@

 #define CONFIG_STANDALONE_LOAD_ADDR	0x80300000

-#ifdef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDRC_GEN4
-#else
-#define CONFIG_SYS_FSL_DDRC_ARM_GEN3	/* Enable Freescale ARM DDR3 driver */
-#endif
-
-#ifndef CONFIG_ARCH_LS1012A
-#define CONFIG_SYS_FSL_DDR		/* Freescale DDR driver */
-#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_5_0
-#endif
-
 /*
 * Reserve secure memory
 * To be aligned with MMU block size
@ -42,7 +31,6 @@
 #define CONFIG_SYS_FSL_OCRAM_SIZE	0x00200000	/* 2M */

 /* DDR */
-#define CONFIG_SYS_FSL_DDR_LE
 #define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
 #define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_LS2_DDR_BLOCK1_SIZE

@ -166,7 +154,6 @@
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7
 #define CONFIG_SYS_NUM_FM1_10GEC		1
-#define CONFIG_SYS_FSL_DDR_BE
 #define CONFIG_SYS_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
 #define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_DDR_BLOCK1_SIZE

@ -204,7 +191,6 @@
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		8
 #define CONFIG_SYS_NUM_FM1_10GEC		2
-#define CONFIG_SYS_FSL_DDR_BE
 #define CONFIG_SYS_DDR_BLOCK1_SIZE  ((phys_size_t)2 << 30)
 #define CONFIG_MAX_MEM_MAPPED           CONFIG_SYS_DDR_BLOCK1_SIZE

--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@ -4,7 +4,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@ -4,7 +4,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-lpuart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
+CONFIG_SYS_EXTRA_OPTIONS="LPUART"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@ -12,7 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@ -23,6 +23,7 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
+CONFIG_SYS_FSL_DDR3=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@ -4,7 +4,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,QSPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@ -12,7 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@ -12,7 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@ -4,7 +4,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, SECURE_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@ -4,7 +4,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@ -12,7 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@ -12,7 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+CONFIG_SYS_FSL_DDR4=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@ -24,10 +24,6 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F	1

-#ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
-#endif
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@ -42,9 +42,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPD_BUS_NUM		0

 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
-#endif

 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@ -46,7 +46,6 @@
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
 #endif
 #ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif