net: mvpp2: handle register mapping and access for PPv2.2

This commit adjusts the mvpp2 driver register mapping and access logic
to support PPv2.2, to handle a number of differences.

Due to how the registers are laid out in memory, the Device Tree binding
for the "reg" property is different:

- On PPv2.1, we had a first area for the common registers, and then one
  area per port.

- On PPv2.2, we have a first area for the common registers, and a
  second area for all the per-ports registers.

In addition, on PPv2.2, the area for the common registers is split into
so-called "address spaces" of 64 KB each. They allow to access the same
registers, but from different CPUs. Hence the introduction of cpu_base[]
in 'struct mvpp2', and the modification of the mvpp2_write() and
mvpp2_read() register accessors. For PPv2.1, the compatibility is
preserved by using an "address space" size of 0.

Changed by Stefan for U-Boot:
Since we don't support multiple CPUs in U-Boot, I've removed all the
code, macros and variables introduced in the Linux patch version for this.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

drivers/net/mvpp2.c

@@ -342,6 +342,9 @@ do {									\
 #define      MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(v)	(((v) << 6) & \
 					MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK)
 
+#define MVPP22_PORT_BASE			0x30e00
+#define MVPP22_PORT_OFFSET			0x1000
+
 #define MVPP2_CAUSE_TXQ_SENT_DESC_ALL_MASK	0xff
 
 /* Descriptor ring Macros */
@@ -702,6 +705,7 @@ struct mvpp2 {
 	/* Shared registers' base addresses */
 	void __iomem *base;
 	void __iomem *lms_base;
+	void __iomem *iface_base;
 
 	/* List of pointers to port structures */
 	struct mvpp2_port **port_list;
@@ -736,6 +740,11 @@ struct mvpp2_pcpu_stats {
 struct mvpp2_port {
 	u8 id;
 
+	/* Index of the port from the "group of ports" complex point
+	 * of view
+	 */
+	int gop_id;
+
 	int irq;
 
 	struct mvpp2 *priv;
@@ -3270,7 +3279,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port,
 
 	mvpp2_write(port->priv, MVPP2_TXQ_PREF_BUF_REG,
 		    MVPP2_PREF_BUF_PTR(desc) | MVPP2_PREF_BUF_SIZE_16 |
-		    MVPP2_PREF_BUF_THRESH(desc_per_txq/2));
+		    MVPP2_PREF_BUF_THRESH(desc_per_txq / 2));
 
 	/* WRR / EJP configuration - indirect access */
 	tx_port_num = mvpp2_egress_port(port);
@@ -3779,11 +3788,24 @@ static int mvpp2_port_probe(struct udevice *dev,
 	port->phy_interface = phy_mode;
 	port->phyaddr = phyaddr;
 
-	port->base = (void __iomem *)dev_get_addr_index(dev->parent,
-							priv_common_regs_num
-							+ id);
-	if (IS_ERR(port->base))
-		return PTR_ERR(port->base);
+	if (priv->hw_version == MVPP21) {
+		port->base = (void __iomem *)dev_get_addr_index(
+			dev->parent, priv_common_regs_num + id);
+		if (IS_ERR(port->base))
+			return PTR_ERR(port->base);
+	} else {
+		u32 gop_id;
+
+		gop_id = fdtdec_get_int(gd->fdt_blob, port_node,
+					"gop-port-id", -1);
+		if (id == -1) {
+			dev_err(&pdev->dev, "missing gop-port-id value\n");
+			return -EINVAL;
+		}
+
+		port->base = priv->iface_base + MVPP22_PORT_BASE +
+			gop_id * MVPP22_PORT_OFFSET;
+	}
 
 	port->tx_ring_size = MVPP2_MAX_TXD;
 	port->rx_ring_size = MVPP2_MAX_RXD;
@@ -4307,9 +4329,15 @@ static int mvpp2_base_probe(struct udevice *dev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->lms_base = (void *)dev_get_addr_index(dev, 1);
-	if (IS_ERR(priv->lms_base))
-		return PTR_ERR(priv->lms_base);
+	if (priv->hw_version == MVPP21) {
+		priv->lms_base = (void *)dev_get_addr_index(dev, 1);
+		if (IS_ERR(priv->lms_base))
+			return PTR_ERR(priv->lms_base);
+	} else {
+		priv->iface_base = (void *)dev_get_addr_index(dev, 1);
+		if (IS_ERR(priv->iface_base))
+			return PTR_ERR(priv->iface_base);
+	}
 
 	/* Finally create and register the MDIO bus driver */
 	bus = mdio_alloc();