Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Net: Add Intel E1000 82574L PCIe card support

Browse Source 
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
master
Roy Zang 14 years ago committed by Wolfgang Denk
parent 39768f7715
commit 2c2668f971
3 changed files with 32 additions and 8 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 33
      drivers/net/e1000.c
  2. 6
      drivers/net/e1000.h
  3. 1
      include/pci_ids.h

33
drivers/net/e1000.c
Unescape View File

@ -40,6 +40,8 @@ tested on both gig copper and gig fiber boards
* Copyright (C) Linux Networx.
* Massive upgrade to work with the new intel gigabit NICs.
* <ebiederman at lnxi dot com>
*
* Copyright 2011 Freescale Semiconductor, Inc.
*/
#include "e1000.h"
@ -100,6 +102,7 @@ static struct pci_device_id supported[] = {
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573E},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573E_IAMT},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573L},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82574L},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546GB_QUAD_COPPER_KSP3},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_COPPER_DPT},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_DPT},
@ -331,7 +334,7 @@ static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
if (hw->mac_type == e1000_ich8lan)
return FALSE;
if (hw->mac_type == e1000_82573) {
if (hw->mac_type == e1000_82573 || hw->mac_type == e1000_82574) {
eecd = E1000_READ_REG(hw, EECD);
/* Isolate bits 15 & 16 */
@ -364,7 +367,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw)
return -E1000_ERR_SWFW_SYNC;
eecd = E1000_READ_REG(hw, EECD);
if (hw->mac_type != e1000_82573) {
if (hw->mac_type != e1000_82573 || hw->mac_type != e1000_82574) {
/* Request EEPROM Access */
if (hw->mac_type > e1000_82544) {
eecd |= E1000_EECD_REQ;
@ -498,6 +501,7 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->use_eewr = FALSE;
break;
case e1000_82573:
case e1000_82574:
eeprom->type = e1000_eeprom_spi;
eeprom->opcode_bits = 8;
eeprom->delay_usec = 1;
@ -1317,6 +1321,9 @@ e1000_set_mac_type(struct e1000_hw *hw)
case E1000_DEV_ID_82573L:
hw->mac_type = e1000_82573;
break;
case E1000_DEV_ID_82574L:
hw->mac_type = e1000_82574;
break;
case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
@ -1487,6 +1494,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
E1000_WRITE_REG(hw, TARC1, reg_tarc1);
break;
case e1000_82573:
case e1000_82574:
reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
reg_ctrl_ext &= ~(1 << 23);
reg_ctrl_ext |= (1 << 22);
@ -1728,12 +1736,11 @@ e1000_init_hw(struct eth_device *nic)
| E1000_TXDCTL_FULL_TX_DESC_WB;
E1000_WRITE_REG(hw, TXDCTL1, ctrl);
break;
}
if (hw->mac_type == e1000_82573) {
uint32_t gcr = E1000_READ_REG(hw, GCR);
gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
E1000_WRITE_REG(hw, GCR, gcr);
case e1000_82573:
case e1000_82574:
reg_data = E1000_READ_REG(hw, GCR);
reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
E1000_WRITE_REG(hw, GCR, reg_data);
}
#if 0
@ -1812,6 +1819,7 @@ e1000_setup_link(struct eth_device *nic)
switch (hw->mac_type) {
case e1000_ich8lan:
case e1000_82573:
case e1000_82574:
hw->fc = e1000_fc_full;
break;
default:
@ -4560,6 +4568,9 @@ static int e1000_set_phy_type (struct e1000_hw *hw)
hw->phy_type = e1000_phy_gg82563;
break;
}
case BME1000_E_PHY_ID:
hw->phy_type = e1000_phy_bm;
break;
/* Fall Through */
default:
/* Should never have loaded on this device */
@ -4646,6 +4657,10 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
if (hw->phy_id == M88E1111_I_PHY_ID)
match = TRUE;
break;
case e1000_82574:
if (hw->phy_id == BME1000_E_PHY_ID)
match = TRUE;
break;
case e1000_80003es2lan:
if (hw->phy_id == GG82563_E_PHY_ID)
match = TRUE;
@ -4710,6 +4725,7 @@ e1000_set_media_type(struct e1000_hw *hw)
break;
case e1000_ich8lan:
case e1000_82573:
case e1000_82574:
/* The STATUS_TBIMODE bit is reserved or reused
* for the this device.
*/
@ -5125,6 +5141,7 @@ void e1000_get_bus_type(struct e1000_hw *hw)
case e1000_82571:
case e1000_82572:
case e1000_82573:
case e1000_82574:
case e1000_80003es2lan:
hw->bus_type = e1000_bus_type_pci_express;
break;

6
drivers/net/e1000.h
Unescape View File

@ -2,6 +2,7 @@
Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
Copyright 2011 Freescale Semiconductor, Inc.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@ -81,6 +82,7 @@ typedef enum {
e1000_82571,
e1000_82572,
e1000_82573,
e1000_82574,
e1000_80003es2lan,
e1000_ich8lan,
e1000_num_macs
@ -200,6 +202,7 @@ typedef enum {
e1000_phy_gg82563,
e1000_phy_igp_3,
e1000_phy_ife,
e1000_phy_bm,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
@ -286,6 +289,7 @@ struct e1000_phy_stats {
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82574L 0x10D3
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
@ -2417,6 +2421,8 @@ struct e1000_hw {
#define L1LXT971A_PHY_ID 0x001378E0
#define GG82563_E_PHY_ID 0x01410CA0
#define BME1000_E_PHY_ID 0x01410CB0
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
#define PHY_SOF 0x01

1
include/pci_ids.h
Unescape View File

@ -1853,6 +1853,7 @@
#define PCI_DEVICE_ID_INTEL_82573E 0x108B
#define PCI_DEVICE_ID_INTEL_82573E_IAMT 0x108C
#define PCI_DEVICE_ID_INTEL_82573L 0x109A
#define PCI_DEVICE_ID_INTEL_82574L 0x10D3
#define PCI_DEVICE_ID_INTEL_82546GB_QUAD_COPPER_KSP3 0x10B5
#define PCI_DEVICE_ID_INTEL_80003ES2LAN_COPPER_DPT 0x1096
#define PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_DPT 0x1098

Write Preview
Loading…
Cancel
Save