Initial revision

master
wdenk 24 years ago
parent 10af385938
commit 2d39b71fb2
  1. 47
      board/cogent/Makefile
  2. 69
      board/cogent/README.cma286
  3. 31
      board/cogent/config.mk
  4. 3
      board/cogent/dipsw.h
  5. 3
      board/cogent/kbm.c
  6. 79
      board/cogent/kbm.h
  7. 3
      board/cogent/par.c
  8. 3
      board/cogent/par.h
  9. 3
      board/cogent/pci.c
  10. 3
      board/cogent/pci.h
  11. 3
      board/cogent/rtc.c
  12. 3
      board/cogent/rtc.h
  13. 15
      board/cogent/serial.h
  14. 28
      board/etx094/config.mk
  15. 30
      board/fads/config.mk
  16. 44
      board/fads/fads.h
  17. 40
      board/genietv/Makefile
  18. 29
      board/spd8xx/config.mk
  19. 28
      board/tqm8xx/config.mk
  20. 28
      cpu/mpc8xx/fec.h

@ -0,0 +1,47 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
SOBJS :=
$(LIB): $(OBJS)
$(AR) crv $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################

@ -0,0 +1,69 @@
CPU module revisions
--------------------
My cpu module has the model number "CMA286-60-990526-01". My motherboard
has the model number "CMA102-32M-990526-01". These are both fairly old,
and may not reflect current design. In particular, I can see from the
Cogent web site that the CMA286 has been significantly redesigned - it
now has on board RAM (4M), ethernet 10baseT PHY (on SCC2), 2 serial ports
(SMC1 and SMC2), and 48pin DIN for the FEC (if present i.e. MPC860T), and
also the EPROM is 512K.
My CMA286-60 has none of this, and only 128K EPROM. In addition, the CPU
clock is listed as 66MHz, whereas mine is 33.333MHz.
Clocks
------
Quote from my "CMA286 MPC860/821 User's Manual":
"When setting up the Periodic Interrupt Timer (PIT), be aware that the
CMA286 places the MPC860/821 in PLL X1 Mode. This means that we feed
a 25MHz clock directly into the MPC860/821. This mode sets the divisor
for the PIT to be 512. In addition, the Time Base Register (TMB)
divisor is set to 16."
I interpreted this information to mean that EXTCLK is 25MHz and that at
power on reset, MODCK1=1 and MODCK2=0, which selects EXTCLK as the
source for OSCCLK and PITRTCLK, sets RTDIV to 512 and sets MF (the
multiplication factor) to 1 (I assume this is what they mean by X1
mode above). MF=1 means the cpus internal clock runs at the same
rate as EXTCLK i.e. 25MHz.
Furthermore, since SCCR[TBS] (the Time Base Source selector bit in the
System Clock and Reset Control register) is set in the cpu initialisation
code, the TMBCLK source is forced to be GCLK2 and the TMBCLK prescale is
forced to be 16. This results in TMBCLK=1562500.
One problem - since PITRTCLK source is EXTCLK (25Mhz) and RTDIV is 512,
PITRTCLK will be 48828.125 (huh?). Another quote from the MPC860 Users
Manual:
"When used by the real-time clock (RTC), the PITRTCLK source is first
divided as determined by RTDIV, and then divided in the RTC circuits by
either 8192 or 9600. Therefore, in order for the RTC to count in
seconds, the clock source must satisfy:
(EXTCLK or OSCM) / [(4 or 512) x (8192 or 9600)] = 1
The RTC will operate with other frequencies, but it will not count in
units of seconds."
Therefore, the internal RTC of the MPC860 is not going to count in
seconds, so we must use the motherboard RTC (if we need a RTC).
I presume this means that they do not provide a fixed oscillator for
OSCM. The code in get_gclk_freq() assumes PITRTCLK source is OSCM,
RTDIV is 4, and that OSCM/4 is 8192 (i.e. a ~32KHz oscillator). Since
the CMA286-60 doesn't have this (at least mine doesn't) we can't use
the code in get_gclk_freq().
Finally, it appears that the internal clock in my CMA286-60 is actually
33.333MHz. Which makes TMBCLK=2083312.5 (another huh?) and
PITRTCLK=65103.515625 (bloody hell!).
If anyone finds anything wrong with the stuff above, I would appreciate
an email about it.
Murray Jensen <Murray.Jensen@cmst.csiro.au>
21-Aug-00

@ -0,0 +1,31 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# Cogent Modular Architecture
#
# Boot EPROM location
TEXT_BASE = 0xfff00000
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)

@ -0,0 +1,3 @@
extern unsigned char dipsw_raw(void);
extern unsigned char dipsw_cooked(void);
extern void dipsw_init(void);

@ -0,0 +1,3 @@
/* keyboard/mouse not implemented yet */
int cma_kbm_not_implemented = 1;

@ -0,0 +1,79 @@
/* keyboard/mouse not implemented yet */
extern int cma_kbm_not_implemented;
/**************** DEFINES for H8542B Keyboard/Mouse Controller ***************/
/*
* note the auxillary port is used to control the mouse
*/
/* 8542B Commands (Sent to the Command Port) */
#define HT8542_CMD_SET_BYTE 0x60 /* Set the command byte */
#define HT8542_CMD_GET_BYTE 0x20 /* Get the command byte */
#define HT8542_CMD_KBD_OBUFF 0xD2 /* Write to HT8542 Kbd Output Buffer */
#define HT8542_CMD_AUX_OBUFF 0xD3 /* Write to HT8542 Mse Output Buffer */
#define HT8542_CMD_AUX_WRITE 0xD4 /* Write to Mouse Port */
#define HT8542_CMD_AUX_OFF 0xA7 /* Disable Mouse Port */
#define HT8542_CMD_AUX_ON 0xA8 /* Re-Enable Mouse Port */
#define HT8542_CMD_AUX_TEST 0xA9 /* Test for the presence of a Mouse */
#define HT8542_CMD_DIAG 0xAA /* Start Diagnostics */
#define HT8542_CMD_KBD_TEST 0xAB /* Test for presence of a keyboard */
#define HT8542_CMD_KBD_OFF 0xAD /* Disable Kbd Port (use KBD_DAT_ON) */
#define HT8542_CMD_KBD_ON 0xAE /* Enable Kbd Port (use KBD_DAT_OFF) */
/* HT8542B cmd byte set by KBD_CMD_SET_BYTE and retrieved by KBD_CMD_GET_BYTE */
#define HT8542_CMD_BYTE_TRANS 0x40
#define HT8542_CMD_BYTE_AUX_OFF 0x20 /* 1 = mse port disabled, 0 = enabled */
#define HT8542_CMD_BYTE_KBD_OFF 0x10 /* 1 = kbd port disabled, 0 = enabled */
#define HT8542_CMD_BYTE_OVER 0x08 /* 1 = override keyboard lock */
#define HT8542_CMD_BYTE_RES 0x04 /* reserved */
#define HT8542_CMD_BYTE_AUX_INT 0x02 /* 1 = enable mouse interrupt */
#define HT8542_CMD_BYTE_KBD_INT 0x01 /* 1 = enable keyboard interrupt */
/* Keyboard Commands (Sent to the Data Port) */
#define KBD_CMD_LED 0xED /* Set Keyboard LEDS with next byte */
#define KBD_CMD_ECHO 0xEE /* Echo - we get 0xFA, 0xEE back */
#define KBD_CMD_MODE 0xF0 /* set scan code mode with next byte */
#define KBD_CMD_ID 0xF2 /* get keyboard/mouse ID */
#define KBD_CMD_RPT 0xF3 /* Set Repeat Rate and Delay 2nd Byte */
#define KBD_CMD_ON 0xF4 /* Enable keyboard */
#define KBD_CMD_OFF 0xF5 /* Disables Scanning, Resets to Def */
#define KBD_CMD_DEF 0xF6 /* Reverts kbd to default settings */
#define KBD_CMD_RST 0xFF /* Reset - should get 0xFA, 0xAA back */
/* Set LED second bit defines */
#define KBD_CMD_LED_SCROLL 0x01 /* Set SCROLL LOCK LED on */
#define KBD_CMD_LED_NUM 0x02 /* Set NUM LOCK LED on */
#define KBD_CMD_LED_CAPS 0x04 /* Set CAPS LOCK LED on */
/* Set Mode second byte defines */
#define KBD_CMD_MODE_STAT 0x00 /* get current scan code mode */
#define KBD_CMD_MODE_SCAN1 0x01 /* set mode to scan code 1 */
#define KBD_CMD_MODE_SCAN2 0x02 /* set mode to scan code 2 */
#define KBD_CMD_MODE_SCAN3 0x03 /* set mode to scan code 3 */
/* Keyboard/Mouse ID Codes */
#define KBD_CMD_ID_1ST 0xAB /* 1st byte is 0xAB, 2nd is actual ID */
#define KBD_CMD_ID_KBD 0x83 /* Keyboard */
#define KBD_CMD_ID_MOUSE 0x00 /* Mouse */
/* Keyboard Data Return Defines */
#define KBD_STAT_OVER 0x00 /* Buffer Overrun */
#define KBD_STAT_DIAG_OK 0x55 /* Internal Self Test OK */
#define KBD_STAT_RST_OK 0xAA /* Reset Complete */
#define KBD_STAT_ECHO 0xEE /* Echo Command Return */
#define KBD_STAT_BRK 0xF0 /* Prefix for Break Key Code */
#define KBD_STAT_ACK 0xFA /* Received after all commands */
#define KBD_STAT_DIAG_FAIL 0xFD /* Internal Self Test Failed */
#define KBD_STAT_RESEND 0xFE /* Resend Last Command */
/* HT8542B Status Register Bit Defines */
#define HT8542_STAT_OBF 0x01 /* 1 = output buffer is full */
#define HT8542_STAT_IBF 0x02 /* 1 = input buffer is full */
#define HT8542_STAT_SYS 0x04 /* system flag - unused */
#define HT8542_STAT_CMD 0x08 /* 1 = cmd in input buffer, 0 = data */
#define HT8542_STAT_INH 0x10 /* 1 = Inhibit - unused */
#define HT8542_STAT_TX 0x20 /* 1 = Transmit Timeout has occured */
#define HT8542_STAT_RX 0x40 /* 1 = Receive Timeout has occured */
#define HT8542_STAT_PERR 0x80 /* 1 = Parity Error from Keyboard */

@ -0,0 +1,3 @@
/* parallel not implemented yet */
int cma_parallel_not_implemented = 1;

@ -0,0 +1,3 @@
/* parallel not implemented yet */
extern int cma_parallel_not_implemented;

@ -0,0 +1,3 @@
/* pci not implemented yet */
int cma_pci_not_implemented = 1;

@ -0,0 +1,3 @@
/* pci not implemented yet */
extern int cma_pci_not_implemented;

@ -0,0 +1,3 @@
/* rtc not implemented yet */
int cma_rtc_not_implemented = 1;

@ -0,0 +1,3 @@
/* rtc not implemented yet */
extern int cma_rtc_not_implemented;

@ -0,0 +1,15 @@
/* Line Status Register bits */
#define LSR_DR 0x01 /* Data ready */
#define LSR_OE 0x02 /* Overrun */
#define LSR_PE 0x04 /* Parity error */
#define LSR_FE 0x08 /* Framing error */
#define LSR_BI 0x10 /* Break */
#define LSR_THRE 0x20 /* Xmit holding register empty */
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
#define CLKRATE 3686400 /* cogent motherboard serial clk = 3.6864MHz */
#define DEFDIV 1 /* default to 230400 bps */
#define br_to_div(br) (CLKRATE / (16 * (br)))
#define div_to_br(div) (CLKRATE / (16 * (div)))

@ -0,0 +1,28 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# ETX_094 Boards
#
TEXT_BASE = 0x40000000

@ -0,0 +1,30 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# FADS boards
#
#TEXT_BASE = 0xFE000000
TEXT_BASE = 0x02800000
OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data

@ -0,0 +1,44 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/****************************************************************************
* FLASH Memory Map as used by FADS Monitor:
*
* Start Address Length
* +-----------------------+ 0xFE00_0000 Start of Flash -----------------
* | MON8xx code | 0xFE00_0100 Reset Vector
* +-----------------------+ 0xFE0?_????
* | (unused) |
* +-----------------------+ 0xFE01_FF00
* | Ethernet Addresses | 0x78
* +-----------------------+ 0xFE01_FF78
* | (Reserved for MON8xx) | 0x44
* +-----------------------+ 0xFE01_FFBC
* | Lock Address | 0x04
* +-----------------------+ 0xFE01_FFC0 ^
* | Hardware Information | 0x40 | MON8xx
* +=======================+ 0xFE02_0000 (sector border) -----------------
* | Autostart Header | | Applications
* | ... | v
*
*****************************************************************************/

@ -0,0 +1,40 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $^
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################

@ -0,0 +1,29 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# SPD823TS boards
#
TEXT_BASE = 0xFF000000

@ -0,0 +1,28 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# TQM8xxL boards
#
TEXT_BASE = 0x40000000

@ -0,0 +1,28 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _FEC_H_
#define _FEC_H_
#endif /* _FEC_H_ */
Loading…
Cancel
Save