Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>

arch/arm/include/asm/config.h

@@ -21,9 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all ARM boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #endif

arch/arm/lib/board.c

@@ -679,15 +679,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #if !defined(CONFIG_SYS_NO_FLASH)
 	ulong flash_size;
 #endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	extern void malloc_bin_reloc (void);
-#if defined(CONFIG_CMD_BMP)
-	extern void bmp_reloc(void);
-#endif
-#if defined(CONFIG_CMD_I2C)
-	extern void i2c_reloc(void);
-#endif
-#endif
 
 	gd = id;
 	bd = gd->bd;
@@ -704,39 +695,16 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	/*
-	 * We have to relocate the command table manually
-	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#if defined(CONFIG_CMD_BMP)
-	bmp_reloc();
-#endif
-#if defined(CONFIG_CMD_I2C)
-	i2c_reloc();
-#endif
-#if defined(CONFIG_CMD_ONENAND)
-	onenand_reloc();
-#endif
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
-
 #ifdef CONFIG_LOGBUFFER
 	logbuff_init_ptrs ();
 #endif
 #ifdef CONFIG_POST
 	post_output_backlog ();
-#ifndef CONFIG_RELOC_FIXUP_WORKS
-	post_reloc ();
-#endif
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
 	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	malloc_bin_reloc ();
-#endif
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");

arch/avr32/include/asm/config.h

@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif

arch/avr32/lib/board.c

@@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 
 	monitor_flash_len = _edata - _text;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE

arch/blackfin/include/asm/config.h

@@ -13,9 +13,6 @@
 # define CONFIG_BFIN_SCRATCH_REG retn
 #endif
 
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Make sure the structure is properly aligned */
 #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
 # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned

arch/i386/include/asm/config.h

@@ -21,6 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif

arch/m68k/include/asm/config.h

@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #define CONFIG_SYS_BOOT_GET_CMDLINE

arch/m68k/lib/board.c

@@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE

arch/microblaze/include/asm/config.h

@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all Microblaze boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif

arch/mips/include/asm/config.h

@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif

arch/mips/lib/board.c

@@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE

arch/nios2/include/asm/config.h

@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all NIOS2 boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif

arch/powerpc/include/asm/config.h

@@ -89,9 +89,6 @@
 #define CONFIG_SYS_NUM_TLBCAMS	16
 #endif
 
-/* Relocation to SDRAM works on all PPC boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Since so many PPC SOCs have a semi-common LBC, define this here */
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
 	defined(CONFIG_MPC83xx)

arch/sh/include/asm/config.h

@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all sh boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif

arch/sparc/include/asm/config.h

@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 

arch/sparc/lib/board.c

@@ -252,13 +252,13 @@ void board_init_f(ulong bootflag)
 	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 	puts("AMBA:\n");

common/cmd_bmp.c

@@ -137,7 +137,7 @@ static cmd_tbl_t cmd_bmp_sub[] = {
 	U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""),
 };
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void bmp_reloc(void) {
 	fixup_cmdtable(cmd_bmp_sub, ARRAY_SIZE(cmd_bmp_sub));
 }

common/cmd_bootm.c

@@ -590,7 +590,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	ulong		load_end = 0;
 	int		ret;
 	boot_os_fn	*boot_fn;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 	static int relocated = 0;
 
 	/* relocate boot function table */

common/cmd_date.c

@@ -35,10 +35,10 @@ const char *weekdays[] = {
 	"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
 };
 
-#ifdef CONFIG_RELOC_FIXUP_WORKS
-#define RELOC(a)	a
-#else
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 #define RELOC(a)	((typeof(a))((unsigned long)(a) + gd->reloc_off))
+#else
+#define RELOC(a)	a
 #endif
 
 int mk_date (char *, struct rtc_time *);

common/cmd_i2c.c

@@ -1284,7 +1284,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
 	U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""),
 };
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void i2c_reloc(void) {
 	fixup_cmdtable(cmd_i2c_sub, ARRAY_SIZE(cmd_i2c_sub));
 }

common/cmd_nvedit.c

@@ -837,7 +837,7 @@ static cmd_tbl_t cmd_env_sub[] = {
 	U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""),
 };
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 void env_reloc(void)
 {
 	fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub));

common/cmd_onenand.c

@@ -525,7 +525,7 @@ static cmd_tbl_t cmd_onenand_sub[] = {
 	U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""),
 };
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void onenand_reloc(void) {
 	fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub));
 }

common/command.c

@@ -466,7 +466,7 @@ int cmd_get_data_size(char* arg, int default_size)
 }
 #endif
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 DECLARE_GLOBAL_DATA_PTR;
 
 void fixup_cmdtable(cmd_tbl_t *cmdtp, int size)

common/dlmalloc.c

@@ -1491,7 +1491,7 @@ static mbinptr av_[NAV * 2 + 2] = {
  IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127)
 };
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void malloc_bin_reloc (void)
 {
 	unsigned long *p = (unsigned long *)(&av_[2]);

common/env_common.c

@@ -227,7 +227,7 @@ int env_import(const char *buf, int check)
 
 void env_relocate (void)
 {
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	extern void env_reloc(void);
 
 	env_reloc();

common/hush.c

@@ -3268,7 +3268,7 @@ int parse_file_outer(void)
 }
 
 #ifdef __U_BOOT__
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 static void u_boot_hush_reloc(void)
 {
 	unsigned long addr;
@@ -3290,7 +3290,7 @@ int u_boot_hush_start(void)
 		top_vars->next = 0;
 		top_vars->flg_export = 0;
 		top_vars->flg_read_only = 1;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 		u_boot_hush_reloc();
 #endif
 	}

common/image.c

@@ -520,7 +520,7 @@ char *get_table_entry_name (table_entry_t *table, char *msg, int id)
 {
 	for (; table->id >= 0; ++table) {
 		if (table->id == id)
-#if defined(USE_HOSTCC) || defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC)
 			return table->lname;
 #else
 			return table->lname + gd->reloc_off;
@@ -585,10 +585,10 @@ int get_table_entry_id (table_entry_t *table,
 	fprintf (stderr, "\n");
 #else
 	for (t = table; t->id >= 0; ++t) {
-#ifdef CONFIG_RELOC_FIXUP_WORKS
-		if (t->sname && strcmp(t->sname, name) == 0)
-#else
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 		if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0)
+#else
+		if (t->sname && strcmp(t->sname, name) == 0)
 #endif
 			return (t->id);
 	}

common/serial.c

@@ -99,7 +99,7 @@ struct serial_device *default_serial_console(void) __attribute__((weak, alias("_
 
 int serial_register (struct serial_device *dev)
 {
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 	dev->init += gd->reloc_off;
 	dev->setbrg += gd->reloc_off;
 	dev->getc += gd->reloc_off;

common/stdio.c

@@ -193,7 +193,7 @@ int stdio_deregister(char *devname)
 
 int stdio_init (void)
 {
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/* already relocated for current ARM implementation */
 	ulong relocation_offset = gd->reloc_off;
 	int i;
@@ -203,7 +203,7 @@ int stdio_init (void)
 		stdio_names[i] = (char *) (((ulong) stdio_names[i]) +
 						relocation_offset);
 	}
-#endif /* !CONFIG_RELOC_FIXUP_WORKS */
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
 
 	/* Initialize the list */
 	INIT_LIST_HEAD(&(devs.list));

disk/part.c

@@ -81,13 +81,13 @@ block_dev_desc_t *get_dev(char* ifname, int dev)
 	char *name;
 
 	name = drvr->name;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 	name += gd->reloc_off;
 #endif
 	while (name) {
 		name = drvr->name;
 		reloc_get_dev = drvr->get_dev;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 		name += gd->reloc_off;
 		reloc_get_dev += gd->reloc_off;
 #endif

doc/README.arm-relocation

@@ -36,15 +36,14 @@ At lib level:
 
 At config level:
 
-	Define CONFIG_RELOC_FIXUP_WORKS.
 	Undefine CONFIG_SYS_ARM_WITHOUT_RELOC
 
 * WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING *
 
 Boards which are not fixed to support relocation will be REMOVED!
 
-Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC and CONFIG_RELOC_FIXUP_WORKS will
-disappear and boards which have to migrated to relocation will disappear too.
+Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC will disappear and boards
+which have to migrated to relocation will disappear too.
 
 -----------------------------------------------------------------------------
 

drivers/mtd/nand/nand.c

@@ -54,7 +54,7 @@ static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand,
 		if (nand_scan(mtd, maxchips) == 0) {
 			if (!mtd->name)
 				mtd->name = (char *)default_nand_name;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 			else
 				mtd->name += gd->reloc_off;
 #endif

drivers/net/phy/miiphybb.c

@@ -127,7 +127,7 @@ void bb_miiphy_init(void)
 	int i;
 
 	for (i = 0; i < bb_miiphy_buses_num; i++) {
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 		/* Relocate the hook pointers*/
 		BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off);
 		BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off);

fs/ubifs/ubifs.c

@@ -121,7 +121,7 @@ static int __init compr_init(struct ubifs_compressor *compr)
 {
 	ubifs_compressors[compr->compr_type] = compr;
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 	ubifs_compressors[compr->compr_type]->name += gd->reloc_off;
 	ubifs_compressors[compr->compr_type]->capi_name += gd->reloc_off;
 	ubifs_compressors[compr->compr_type]->decompress += gd->reloc_off;

include/command.h

@@ -125,7 +125,7 @@ cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage}
 
 #endif	/* CONFIG_SYS_LONGHELP */
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
 #endif
 #endif	/* __COMMAND_H */

include/post.h

@@ -137,7 +137,7 @@ void post_output_backlog ( void );
 int post_run (char *name, int flags);
 int post_info (char *name);
 int post_log (char *format, ...);
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void post_reloc (void);
 #endif
 unsigned long post_time_ms (unsigned long base);

post/post.c

@@ -422,7 +422,7 @@ int post_log (char *format, ...)
 	return 0;
 }
 
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
 void post_reloc (void)
 {
 	unsigned int i;