twl4030: VMMC2 3.2V enable on MMC init

This enables the VMMC2 LDO, which powers the MMC2 device.
When the device starts from MMC2, this has already been enabled by the BootROM,
but when starting from peripheral boot (USB, UART), it is not the case.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>

drivers/power/twl4030.c

@@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void)
 				TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
 				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+	/* Set VMMC2 to 3.15 Volts */
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
+				TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
+				TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }

include/twl4030.h

@@ -395,6 +395,8 @@
 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18		0x03
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30		0x02
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32		0x03
+#define TWL4030_PM_RECEIVER_VMMC2_VSEL_30		0x0B
+#define TWL4030_PM_RECEIVER_VMMC2_VSEL_32		0x0C
 #define TWL4030_PM_RECEIVER_VSIM_VSEL_18		0x03
 
 /* Device Selection in PM Receiver Module */