parent
59ac972970
commit
3088189a15
@ -0,0 +1 @@ |
||||
/u-boot.lds |
@ -0,0 +1,57 @@ |
||||
#
|
||||
# U-boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
# (C) Copyright 2000-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS-y := $(BOARD).o
|
||||
|
||||
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS-y))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS-y))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds |
||||
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
||||
|
||||
$(obj)u-boot.lds: u-boot.lds.S |
||||
$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
|
||||
|
||||
clean: |
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean |
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
@ -0,0 +1,46 @@ |
||||
/*
|
||||
* U-boot - blackstamp.c BlackStamp board specific routines |
||||
* Most code stolen from boards/bf533-stamp/bf533-stamp.c |
||||
* Edited to the BlackStamp by Ben Matthews for UR LLE |
||||
* |
||||
* Copyright (c) 2005-2009 Analog Devices Inc. |
||||
* |
||||
* (C) Copyright 2000-2004 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* Licensed under the GPL-2 or later. |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <asm/io.h> |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
int checkboard(void) |
||||
{ |
||||
printf("Board: BlackStamp\n"); |
||||
printf("Support: http://blackfin.uclinux.org/gf/project/blackstamp/\n"); |
||||
return 0; |
||||
} |
||||
|
||||
phys_size_t initdram(int board_type) |
||||
{ |
||||
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; |
||||
gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; |
||||
return gd->bd->bi_memsize; |
||||
} |
||||
|
||||
#ifdef SHARED_RESOURCES |
||||
void swap_to(int device_id) |
||||
{ |
||||
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); |
||||
SSYNC(); |
||||
if (device_id == ETHERNET) |
||||
bfin_write_FIO_FLAG_S(PF0); |
||||
else if (device_id == FLASH) |
||||
bfin_write_FIO_FLAG_C(PF0); |
||||
else |
||||
printf("Unknown device to switch\n"); |
||||
SSYNC(); |
||||
} |
||||
#endif |
@ -0,0 +1,32 @@ |
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
# (C) Copyright 2001
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
# This is not actually used for Blackfin boards so do not change it
|
||||
#TEXT_BASE = do-not-use-me
|
||||
|
||||
LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
|
||||
|
||||
# Set some default LDR flags based on boot mode.
|
||||
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
|
@ -0,0 +1,143 @@ |
||||
/* |
||||
* U-boot - u-boot.lds.S |
||||
* |
||||
* Copyright (c) 2005-2008 Analog Device Inc. |
||||
* |
||||
* (C) Copyright 2000-2004 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#include <config.h> |
||||
#include <asm/blackfin.h> |
||||
#undef ALIGN |
||||
#undef ENTRY |
||||
#undef bfin |
||||
|
||||
/* If we don't actually load anything into L1 data, this will avoid |
||||
* a syntax error. If we do actually load something into L1 data, |
||||
* we'll get a linker memory load error (which is what we'd want). |
||||
* This is here in the first place so we can quickly test building |
||||
* for different CPU's which may lack non-cache L1 data. |
||||
*/ |
||||
#ifndef L1_DATA_B_SRAM |
||||
# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE |
||||
# define L1_DATA_B_SRAM_SIZE 0 |
||||
#endif |
||||
|
||||
OUTPUT_ARCH(bfin) |
||||
|
||||
MEMORY |
||||
{ |
||||
ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN |
||||
l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE |
||||
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE |
||||
} |
||||
|
||||
ENTRY(_start) |
||||
SECTIONS |
||||
{ |
||||
.text : |
||||
{ |
||||
cpu/blackfin/start.o (.text .text.*) |
||||
|
||||
#ifdef ENV_IS_EMBEDDED |
||||
/* WARNING - the following is hand-optimized to fit within |
||||
* the sector before the environment sector. If it throws |
||||
* an error during compilation remove an object here to get |
||||
* it linked after the configuration sector. |
||||
*/ |
||||
|
||||
cpu/blackfin/traps.o (.text .text.*) |
||||
cpu/blackfin/interrupt.o (.text .text.*) |
||||
cpu/blackfin/serial.o (.text .text.*) |
||||
common/dlmalloc.o (.text .text.*) |
||||
lib_generic/crc32.o (.text .text.*) |
||||
|
||||
. = DEFINED(env_offset) ? env_offset : .;
|
||||
common/env_embedded.o (.text .text.*) |
||||
#endif |
||||
|
||||
__initcode_start = .;
|
||||
cpu/blackfin/initcode.o (.text .text.*) |
||||
__initcode_end = .;
|
||||
|
||||
*(.text .text.*) |
||||
} >ram |
||||
|
||||
.rodata : |
||||
{ |
||||
. = ALIGN(4);
|
||||
*(.rodata .rodata.*) |
||||
*(.rodata1) |
||||
*(.eh_frame) |
||||
. = ALIGN(4);
|
||||
} >ram |
||||
|
||||
.data : |
||||
{ |
||||
. = ALIGN(256);
|
||||
*(.data .data.*) |
||||
*(.data1) |
||||
*(.sdata) |
||||
*(.sdata2) |
||||
*(.dynamic) |
||||
CONSTRUCTORS |
||||
} >ram |
||||
|
||||
.u_boot_cmd : |
||||
{ |
||||
___u_boot_cmd_start = .;
|
||||
*(.u_boot_cmd) |
||||
___u_boot_cmd_end = .;
|
||||
} >ram |
||||
|
||||
.text_l1 : |
||||
{ |
||||
. = ALIGN(4);
|
||||
__stext_l1 = .;
|
||||
*(.l1.text) |
||||
. = ALIGN(4);
|
||||
__etext_l1 = .;
|
||||
} >l1_code AT>ram |
||||
__stext_l1_lma = LOADADDR(.text_l1);
|
||||
|
||||
.data_l1 : |
||||
{ |
||||
. = ALIGN(4);
|
||||
__sdata_l1 = .;
|
||||
*(.l1.data) |
||||
*(.l1.bss) |
||||
. = ALIGN(4);
|
||||
__edata_l1 = .;
|
||||
} >l1_data AT>ram |
||||
__sdata_l1_lma = LOADADDR(.data_l1);
|
||||
|
||||
.bss : |
||||
{ |
||||
. = ALIGN(4);
|
||||
__bss_start = .;
|
||||
*(.sbss) *(.scommon) |
||||
*(.dynbss) |
||||
*(.bss .bss.*) |
||||
*(COMMON) |
||||
__bss_end = .;
|
||||
} >ram |
||||
} |
@ -0,0 +1,275 @@ |
||||
/*
|
||||
* U-boot - Configuration file for BlackStamp board |
||||
* Configuration by Ben Matthews for UR LLE using bf533-stamp.h |
||||
* as a template |
||||
* See http://blackfin.uclinux.org/gf/project/blackstamp/
|
||||
*/ |
||||
|
||||
#ifndef __CONFIG_BLACKSTAMP_H__ |
||||
#define __CONFIG_BLACKSTAMP_H__ |
||||
|
||||
#include <asm/blackfin-config-pre.h> |
||||
|
||||
/*
|
||||
* Debugging: Set these options if you're having problems |
||||
*/ |
||||
/*
|
||||
* #define CONFIG_DEBUG_EARLY_SERIAL |
||||
* #define DEBUG |
||||
* #define CONFIG_DEBUG_DUMP |
||||
* #define CONFIG_DEBUG_DUMP_SYMS |
||||
*/ |
||||
#define CONFIG_PANIC_HANG 0 |
||||
|
||||
/* CPU Options
|
||||
* Be sure to set the Silicon Revision Correctly |
||||
*/ |
||||
#define CONFIG_BFIN_CPU bf532-0.5 |
||||
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER |
||||
|
||||
/*
|
||||
* Board settings |
||||
*/ |
||||
#define CONFIG_DRIVER_SMC91111 1 |
||||
#define CONFIG_SMC91111_BASE 0x20300300 |
||||
|
||||
/* FLASH/ETHERNET uses the same address range
|
||||
* Depending on what you have the CPLD doing |
||||
* this probably isn't needed |
||||
*/ |
||||
#define SHARED_RESOURCES 1 |
||||
|
||||
/* Is I2C bit-banged? */ |
||||
#undef CONFIG_SOFT_I2 |
||||
|
||||
/*
|
||||
* Clock Settings |
||||
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV |
||||
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV |
||||
*/ |
||||
/* CONFIG_CLKIN_HZ is any value in Hz */ |
||||
#define CONFIG_CLKIN_HZ 25000000 |
||||
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ |
||||
/* 1 = CLKIN / 2 */ |
||||
#define CONFIG_CLKIN_HALF 0 |
||||
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ |
||||
/* 1 = bypass PLL */ |
||||
#define CONFIG_PLL_BYPASS 0 |
||||
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ |
||||
/* Values can range from 0-63 (where 0 means 64) */ |
||||
#define CONFIG_VCO_MULT 16 |
||||
/* CCLK_DIV controls the core clock divider */ |
||||
/* Values can be 1, 2, 4, or 8 ONLY */ |
||||
#define CONFIG_CCLK_DIV 1 |
||||
/* SCLK_DIV controls the system clock divider */ |
||||
/* Values can range from 1-15 */ |
||||
#define CONFIG_SCLK_DIV 3 |
||||
|
||||
/*
|
||||
* Network settings |
||||
*/ |
||||
|
||||
#ifdef CONFIG_DRIVER_SMC91111 |
||||
#define CONFIG_IPADDR 192.168.0.15 |
||||
#define CONFIG_NETMASK 255.255.255.0 |
||||
#define CONFIG_GATEWAYIP 192.168.0.1 |
||||
#define CONFIG_SERVERIP 192.168.0.2 |
||||
#define CONFIG_HOSTNAME blackstamp |
||||
#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs |
||||
#define CONFIG_SYS_AUTOLOAD "no" |
||||
|
||||
/* To remove hardcoding and enable MAC storage in EEPROM */ |
||||
/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ |
||||
#endif |
||||
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH |
||||
#define CONFIG_ENV_OFFSET 0x4000 |
||||
#define CONFIG_ENV_SIZE 0x2000 |
||||
#define CONFIG_ENV_SECT_SIZE 0x40000 |
||||
#define ENV_IS_EMBEDDED_CUSTOM |
||||
|
||||
/*
|
||||
* SDRAM settings & memory map |
||||
*/ |
||||
|
||||
#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ |
||||
#define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ |
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) |
||||
#define CONFIG_SYS_MALLOC_LEN (384 << 10) |
||||
|
||||
/*
|
||||
* Command settings |
||||
*/ |
||||
|
||||
#define CONFIG_SYS_LONGHELP 1 |
||||
#define CONFIG_CMDLINE_EDITING 1 |
||||
#define CONFIG_AUTO_COMPLETE 1 |
||||
#define CONFIG_ENV_OVERWRITE 1 |
||||
|
||||
#include <config_cmd_default.h> |
||||
|
||||
#ifdef CONFIG_DRIVER_SMC91111 |
||||
# define CONFIG_CMD_DHCP |
||||
# define CONFIG_CMD_PING |
||||
#else |
||||
# undef CONFIG_CMD_NET |
||||
#endif |
||||
|
||||
#ifdef CONFIG_SOFT_I2C |
||||
# define CONFIG_CMD_I2C |
||||
#endif |
||||
|
||||
#define CONFIG_CMD_BOOTLDR |
||||
#define CONFIG_CMD_CACHE |
||||
#define CONFIG_CMD_CPLBINFO |
||||
#define CONFIG_CMD_DATE |
||||
#define CONFIG_CMD_SF |
||||
#define CONFIG_CMD_ELF |
||||
|
||||
#define CONFIG_BOOTDELAY 5 |
||||
#define CONFIG_BOOTCOMMAND "run ramboot" |
||||
#define CONFIG_BOOTARGS \ |
||||
"root=/dev/mtdblock0 rw " \
|
||||
"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
|
||||
"earlyprintk=" \
|
||||
"serial," \
|
||||
"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
|
||||
MK_STR(CONFIG_BAUDRATE) " " \
|
||||
"console=ttyBF0," MK_STR(CONFIG_BAUDRATE) |
||||
|
||||
#if defined(CONFIG_CMD_NET) |
||||
# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) |
||||
# define UBOOT_ENV_FILE "u-boot.bin" |
||||
# else |
||||
# define UBOOT_ENV_FILE "u-boot.ldr" |
||||
# endif |
||||
# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) |
||||
# ifdef CONFIG_SPI |
||||
# define UBOOT_ENV_UPDATE \ |
||||
"eeprom write $(loadaddr) 0x0 $(filesize)" |
||||
# else |
||||
# define UBOOT_ENV_UPDATE \ |
||||
"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
|
||||
"sf erase 0 0x40000;" \
|
||||
"sf write $(loadaddr) 0 $(filesize)" |
||||
# endif |
||||
# else |
||||
# define UBOOT_ENV_UPDATE \ |
||||
"protect off 0x20000000 0x2003FFFF;" \
|
||||
"erase 0x20000000 0x2003FFFF;" \
|
||||
"cp.b $(loadaddr) 0x20000000 $(filesize)" |
||||
# endif |
||||
# define NETWORK_ENV_SETTINGS \ |
||||
"ubootfile=" UBOOT_ENV_FILE "\0" \
|
||||
"update=" \
|
||||
"tftp $(loadaddr) $(ubootfile);" \
|
||||
UBOOT_ENV_UPDATE \
|
||||
"\0" \
|
||||
"addip=set bootargs $(bootargs) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
|
||||
"$(hostname):eth0:off" \
|
||||
"\0" \
|
||||
"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
|
||||
"ramboot=" \
|
||||
"tftp $(loadaddr) uImage;" \
|
||||
"run ramargs;" \
|
||||
"run addip;" \
|
||||
"bootm" \
|
||||
"\0" \
|
||||
"nfsargs=set bootargs " \
|
||||
"root=/dev/nfs rw " \
|
||||
"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
|
||||
"\0" \
|
||||
"nfsboot=" \
|
||||
"tftp $(loadaddr) vmImage;" \
|
||||
"run nfsargs;" \
|
||||
"run addip;" \
|
||||
"bootm" \
|
||||
"\0" |
||||
#else |
||||
# define NETWORK_ENV_SETTINGS |
||||
#endif |
||||
|
||||
/*
|
||||
* Console settings |
||||
*/ |
||||
#define CONFIG_BAUDRATE 57600 |
||||
#define CONFIG_LOADS_ECHO 1 |
||||
#define CONFIG_UART_CONSOLE 0 |
||||
|
||||
/*
|
||||
* I2C settings |
||||
* By default PF2 is used as SDA and PF3 as SCL on the Stamp board |
||||
* Located on the expansion connector on pins 86/85 |
||||
* Note these pins are arbitrarily chosen because we aren't using |
||||
* them yet. You can (and probably should) change these values! |
||||
*/ |
||||
#ifdef CONFIG_SOFT_I2C |
||||
|
||||
#define PF_SCL PF9 |
||||
#define PF_SDA PF8 |
||||
|
||||
#define I2C_INIT do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0) |
||||
#define I2C_ACTIVE do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0) |
||||
#define I2C_TRISTATE do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0) |
||||
#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0) |
||||
#define I2C_SDA(bit) \ |
||||
do { \
|
||||
if (bit) \
|
||||
*pFIO_FLAG_S = PF_SDA; \
|
||||
else \
|
||||
*pFIO_FLAG_C = PF_SDA; \
|
||||
SSYNC(); \
|
||||
} while (0) |
||||
#define I2C_SCL(bit) \ |
||||
do { \
|
||||
if (bit) \
|
||||
*pFIO_FLAG_S = PF_SCL; \
|
||||
else \
|
||||
*pFIO_FLAG_C = PF_SCL; \
|
||||
SSYNC(); \
|
||||
} while (0) |
||||
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ |
||||
|
||||
#define CONFIG_SYS_I2C_SPEED 50000 |
||||
#define CONFIG_SYS_I2C_SLAVE 0xFE |
||||
#endif |
||||
|
||||
/*
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
#define CONFIG_RTC_BFIN 1 |
||||
|
||||
/*
|
||||
* Serial Flash Infomation |
||||
*/ |
||||
#define CONFIG_BFIN_SPI |
||||
/* For the M25P64 SCK Should be Kept < 20Mhz */ |
||||
#define CONFIG_ENV_SPI_MAX_HZ 20000000 |
||||
#define CONFIG_SF_DEFAULT_HZ 20000000 |
||||
#define CONFIG_SPI_FLASH |
||||
#define CONFIG_SPI_FLASH_STMICRO |
||||
|
||||
/*
|
||||
* FLASH organization and environment definitions |
||||
*/ |
||||
|
||||
#define CONFIG_EBIU_AMGCTL_VAL 0xFF |
||||
#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3 |
||||
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983 |
||||
#define CONFIG_EBIU_SDRRC_VAL 0x268 |
||||
#define CONFIG_EBIU_SDGCTL_VAL 0x911109 |
||||
|
||||
/* Even though Rev C boards have Parallel Flash
|
||||
* We aren't supporting it. Newer versions of the |
||||
* hardware don't support Parallel Flash at all. |
||||
*/ |
||||
#define CONFIG_SYS_NO_FLASH |
||||
#undef CONFIG_CMD_IMLS |
||||
#undef CONFIG_CMD_JFFS2 |
||||
#undef CONFIG_CMD_FLASH |
||||
|
||||
#include <asm/blackfin-config-post.h> |
||||
|
||||
#endif |
Loading…
Reference in new issue