Patch by Sam Song, 21 August 2004:

- Fix a typo in README
- Align "(RO)" output for "flinfo" after "protect on"
- Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
  ratio 1:1 when core frequency less than 50MHz

CHANGELOG

@@ -2,6 +2,12 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Sam Song, 21 August 2004:
+  - Fix a typo in README
+  - Align "(RO)" output for "flinfo" after "protect on"
+  - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+    ratio 1:1 when core frequency less than 50MHz
+
 * Patches by himba, 21 Aug 2004:
   - fix some "use of label at end of compound statement" warnings
   - Define type of LCD panel on lubbock board if CONFIG_LCD is used

README

@@ -787,7 +787,7 @@ The following options need to be configured:
 		supported (PIP405, MIP405, MPC5200); define
 		CONFIG_USB_UHCI to enable it.
 		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
-		end define CONFIG_USB_STORAGE to enable the USB
+		and define CONFIG_USB_STORAGE to enable the USB
 		storage devices.
 		Note:
 		Supported are USB Keyboards and USB Floppy drives

drivers/cfi_flash.c

@@ -462,7 +462,7 @@ void flash_print_info (flash_info_t * info)
 		if ((i % 5) == 0)
 			printf ("\n   ");
 		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
+			info->start[i], info->protect[i] ? " (RO)  " : "     ");
 #endif
 	}
 	putc ('\n');

include/configs/RPXlite_DW.h

@@ -82,8 +82,8 @@
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"gatewayip=172.16.115.254\0"					\
 	"netmask=255.255.255.0\0"					\
-	"kernel_addr=ff880000\0"					\
-	"ramdisk_addr=ff980000\0"					\
+	"kernel_addr=ff080000\0"					\
+	"ramdisk_addr=ff200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -178,6 +178,8 @@
 #define CFG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
 #endif
 
+#define CFG_RESET_ADDRESS	((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
@@ -249,8 +251,12 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
-/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */
+/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
+#if defined(RPXlite_64MHz)
 #define CFG_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
+#else
+#define CFG_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
+#endif
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff