Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

board configs: drop NET_MULTI references

Browse Source 
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
master
Mike Frysinger 13 years ago committed by Wolfgang Denk
parent e2a53458a7
commit 31a4f1e5b6
341 changed files with 10 additions and 484 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      arch/arm/include/asm/arch-kirkwood/config.h
  2. 1
      include/configs/A3000.h
  3. 1
      include/configs/ADCIOP.h
  4. 1
      include/configs/AP1000.h
  5. 1
      include/configs/APC405.h
  6. 1
      include/configs/AR405.h
  7. 1
      include/configs/ASH405.h
  8. 1
      include/configs/Alaska8220.h
  9. 1
      include/configs/BAB7xx.h
  10. 1
      include/configs/BC3450.h
  11. 1
      include/configs/CATcenter.h
  12. 1
      include/configs/CMS700.h
  13. 1
      include/configs/CPC45.h
  14. 1
      include/configs/CPCI405.h
  15. 1
      include/configs/CPCI4052.h
  16. 1
      include/configs/CPCI405AB.h
  17. 1
      include/configs/CPCI405DT.h
  18. 1
      include/configs/CPCI750.h
  19. 1
      include/configs/CPCIISER4.h
  20. 1
      include/configs/CRAYL1.h
  21. 1
      include/configs/CU824.h
  22. 1
      include/configs/DASA_SIM.h
  23. 1
      include/configs/DB64360.h
  24. 1
      include/configs/DB64460.h
  25. 1
      include/configs/DU405.h
  26. 1
      include/configs/DU440.h
  27. 1
      include/configs/EB+MCF-EV123.h
  28. 1
      include/configs/ELPPC.h
  29. 1
      include/configs/EVB64260.h
  30. 1
      include/configs/EXBITGEN.h
  31. 1
      include/configs/G2000.h
  32. 1
      include/configs/HH405.h
  33. 1
      include/configs/HIDDEN_DRAGON.h
  34. 1
      include/configs/HUB405.h
  35. 1
      include/configs/IceCube.h
  36. 1
      include/configs/JSE.h
  37. 1
      include/configs/KAREF.h
  38. 1
      include/configs/M5208EVBE.h
  39. 1
      include/configs/M5235EVB.h
  40. 1
      include/configs/M5253DEMO.h
  41. 1
      include/configs/M5271EVB.h
  42. 1
      include/configs/M5272C3.h
  43. 1
      include/configs/M5275EVB.h
  44. 1
      include/configs/M5282EVB.h
  45. 1
      include/configs/M53017EVB.h
  46. 1
      include/configs/M5329EVB.h
  47. 1
      include/configs/M5373EVB.h
  48. 1
      include/configs/M54451EVB.h
  49. 1
      include/configs/M54455EVB.h
  50. 1
      include/configs/M5475EVB.h
  51. 1
      include/configs/M5485EVB.h
  52. 1
      include/configs/MERGERBOX.h
  53. 1
      include/configs/METROBOX.h
  54. 1
      include/configs/MIP405.h
  55. 1
      include/configs/MOUSSE.h
  56. 1
      include/configs/MPC8308RDB.h
  57. 1
      include/configs/MPC8313ERDB.h
  58. 5
      include/configs/MPC8315ERDB.h
  59. 6
      include/configs/MPC8323ERDB.h
  60. 6
      include/configs/MPC832XEMDS.h
  61. 4
      include/configs/MPC8349EMDS.h
  62. 2
      include/configs/MPC8349ITX.h
  63. 5
      include/configs/MPC8360EMDS.h
  64. 6
      include/configs/MPC8360ERDK.h
  65. 5
      include/configs/MPC837XEMDS.h
  66. 2
      include/configs/MPC837XERDB.h
  67. 5
      include/configs/MPC8536DS.h
  68. 5
      include/configs/MPC8540ADS.h
  69. 5
      include/configs/MPC8541CDS.h
  70. 5
      include/configs/MPC8544DS.h
  71. 5
      include/configs/MPC8548CDS.h
  72. 5
      include/configs/MPC8555CDS.h
  73. 5
      include/configs/MPC8560ADS.h
  74. 5
      include/configs/MPC8568MDS.h
  75. 5
      include/configs/MPC8569MDS.h
  76. 5
      include/configs/MPC8572DS.h
  77. 1
      include/configs/MPC8610HPCD.h
  78. 5
      include/configs/MPC8641HPCN.h
  79. 1
      include/configs/MUSENKI.h
  80. 1
      include/configs/MVBC_P.h
  81. 1
      include/configs/MVBLM7.h
  82. 1
      include/configs/MVBLUE.h
  83. 1
      include/configs/MigoR.h
  84. 1
      include/configs/NETPHONE.h
  85. 1
      include/configs/NETTA.h
  86. 1
      include/configs/NETTA2.h
  87. 1
      include/configs/OCRTC.h
  88. 1
      include/configs/ORSG.h
  89. 1
      include/configs/OXC.h
  90. 2
      include/configs/P1022DS.h
  91. 5
      include/configs/P1023RDS.h
  92. 1
      include/configs/P1_P2_RDB.h
  93. 5
      include/configs/P2020DS.h
  94. 1
      include/configs/P2041RDB.h
  95. 1
      include/configs/P3G4.h
  96. 1
      include/configs/PCIPPC2.h
  97. 1
      include/configs/PCIPPC6.h
  98. 1
      include/configs/PIP405.h
  99. 1
      include/configs/PK1C20.h
  100. 1
      include/configs/PLU405.h
  101. Some files were not shown because too many files have changed in this diff Show More

1
arch/arm/include/asm/arch-kirkwood/config.h
Unescape View File

@ -91,7 +91,6 @@
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */

1
include/configs/A3000.h
Unescape View File

@ -100,7 +100,6 @@
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
/* #define CONFIG_TULIP */
/* #define CONFIG_EEPRO100 */

1
include/configs/ADCIOP.h
Unescape View File

@ -185,7 +185,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP

1
include/configs/AP1000.h
Unescape View File

@ -239,7 +239,6 @@
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 1
#define CONFIG_NET_MULTI
#define CONFIG_E1000
#define CONFIG_SYS_ETH_DEV_FN 0x0800

1
include/configs/APC405.h
Unescape View File

@ -103,7 +103,6 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_PPC4xx_EMAC

1
include/configs/AR405.h
Unescape View File

@ -73,7 +73,6 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_NET_MULTI
/*

1
include/configs/ASH405.h
Unescape View File

@ -55,7 +55,6 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_PPC4xx_EMAC

1
include/configs/Alaska8220.h
Unescape View File

@ -97,7 +97,6 @@
#define CONFIG_CMD_SNTP
#define CONFIG_NET_MULTI
#define CONFIG_MII
/*

1
include/configs/BAB7xx.h
Unescape View File

@ -467,7 +467,6 @@ extern unsigned long bab7xx_get_gclk_freq (void);
#define CONFIG_SYS_L2_BAB7xx
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP
#define CONFIG_TULIP_SELECT_MEDIA

1
include/configs/BC3450.h
Unescape View File

@ -106,7 +106,6 @@
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
/*#define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1

1
include/configs/CATcenter.h
Unescape View File

@ -114,7 +114,6 @@
#define CONFIG_PPC4xx_EMAC
#undef CONFIG_EXT_PHY
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
#ifndef CONFIG_EXT_PHY

1
include/configs/CMS700.h
Unescape View File

@ -55,7 +55,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_MII 1 /* MII PHY management */

1
include/configs/CPC45.h
Unescape View File

@ -458,7 +458,6 @@
#undef CONFIG_PCI_PNP
#undef CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

1
include/configs/CPCI405.h
Unescape View File

@ -61,7 +61,6 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
/*

1
include/configs/CPCI4052.h
Unescape View File

@ -63,7 +63,6 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */

1
include/configs/CPCI405AB.h
Unescape View File

@ -63,7 +63,6 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */

1
include/configs/CPCI405DT.h
Unescape View File

@ -62,7 +62,6 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */

1
include/configs/CPCI750.h
Unescape View File

@ -100,7 +100,6 @@
#define CONFIG_MPSC_PORT 0
/* to change the default ethernet port, use this define (options: 0, 1, 2) */
#define CONFIG_NET_MULTI
#define MV_ETH_DEVS 1
#define CONFIG_ETHER_PORT 0

1
include/configs/CPCIISER4.h
Unescape View File

@ -56,7 +56,6 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_NET_MULTI
/*

1
include/configs/CRAYL1.h
Unescape View File

@ -52,7 +52,6 @@
#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */
#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */
#define CONFIG_NET_MULTI
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
#define CONFIG_SYS_NS16550

1
include/configs/CU824.h
Unescape View File

@ -294,7 +294,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP
#define CONFIG_TULIP_USE_IO

1
include/configs/DASA_SIM.h
Unescape View File

@ -175,7 +175,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP

1
include/configs/DB64360.h
Unescape View File

@ -158,7 +158,6 @@ if we use PCI it has its own MAC addr */
#define CONFIG_MPSC_PORT 0
/* to change the default ethernet port, use this define (options: 0, 1, 2) */
#define CONFIG_NET_MULTI
#define MV_ETH_DEVS 2
/* #undef CONFIG_ETHER_PORT_MII */

1
include/configs/DB64460.h
Unescape View File

@ -96,7 +96,6 @@
#define CONFIG_MPSC_PORT 0
/* to change the default ethernet port, use this define (options: 0, 1, 2) */
#define CONFIG_NET_MULTI
#define MV_ETH_DEVS 3
/* #undef CONFIG_ETHER_PORT_MII */

1
include/configs/DU405.h
Unescape View File

@ -57,7 +57,6 @@
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
/*

1
include/configs/DU440.h
Unescape View File

@ -269,7 +269,6 @@ int du440_phy_addr(int devnum);
#define CONFIG_HAS_ETH0
#define CONFIG_SYS_RX_ETH_BUFFER 128
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY1_ADDR du440_phy_addr(1)

1
include/configs/EB+MCF-EV123.h
Unescape View File

@ -126,7 +126,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_MCFFEC
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_SYS_DISCOVER_PHY

1
include/configs/ELPPC.h
Unescape View File

@ -348,7 +348,6 @@
#endif
#define L2_ENABLE (L2_INIT | L2CR_L2E)
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE

1
include/configs/EVB64260.h
Unescape View File

@ -78,7 +78,6 @@
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 0
#define CONFIG_NET_MULTI /* attempt all available adapters */
/* define this if you want to enable GT MAC filtering */
#define CONFIG_GT_USE_MAC_HASH_TABLE

1
include/configs/EXBITGEN.h
Unescape View File

@ -81,7 +81,6 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_NET_MULTI
/*

1
include/configs/G2000.h
Unescape View File

@ -80,7 +80,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_NET_MULTI 1
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */

1
include/configs/HH405.h
Unescape View File

@ -67,7 +67,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_MII 1 /* MII PHY management */

1
include/configs/HIDDEN_DRAGON.h
Unescape View File

@ -95,7 +95,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

1
include/configs/HUB405.h
Unescape View File

@ -62,7 +62,6 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
#define CONFIG_NET_MULTI
/*

1
include/configs/IceCube.h
Unescape View File

@ -79,7 +79,6 @@
#define CONFIG_SYS_XLB_PIPELINING 1
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_EEPRO100 1
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

1
include/configs/JSE.h
Unescape View File

@ -134,7 +134,6 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_NET_MULTI
/*

1
include/configs/KAREF.h
Unescape View File

@ -164,7 +164,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */

1
include/configs/M5208EVBE.h
Unescape View File

@ -57,7 +57,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5235EVB.h
Unescape View File

@ -75,7 +75,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5253DEMO.h
Unescape View File

@ -88,7 +88,6 @@
# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
#endif
#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000
#ifdef CONFIG_DRIVER_DM9000
# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300)

1
include/configs/M5271EVB.h
Unescape View File

@ -90,7 +90,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5272C3.h
Unescape View File

@ -89,7 +89,6 @@
#define CONFIG_BOOTDELAY 5
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5275EVB.h
Unescape View File

@ -87,7 +87,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5282EVB.h
Unescape View File

@ -74,7 +74,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M53017EVB.h
Unescape View File

@ -64,7 +64,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5329EVB.h
Unescape View File

@ -68,7 +68,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5373EVB.h
Unescape View File

@ -68,7 +68,6 @@
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M54451EVB.h
Unescape View File

@ -82,7 +82,6 @@
/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M54455EVB.h
Unescape View File

@ -85,7 +85,6 @@
/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY

1
include/configs/M5475EVB.h
Unescape View File

@ -67,7 +67,6 @@
#define CONFIG_FSLDMAFEC
#ifdef CONFIG_FSLDMAFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_HAS_ETH1

1
include/configs/M5485EVB.h
Unescape View File

@ -67,7 +67,6 @@
#define CONFIG_FSLDMAFEC
#ifdef CONFIG_FSLDMAFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
# define CONFIG_HAS_ETH1

1
include/configs/MERGERBOX.h
Unescape View File

@ -273,7 +273,6 @@
/*
* TSEC
*/
#define CONFIG_NET_MULTI
#define CONFIG_GMII /* MII PHY management */
#define CONFIG_SYS_VSC8601_SKEWFIX
#define CONFIG_SYS_VSC8601_SKEW_TX 3

1
include/configs/METROBOX.h
Unescape View File

@ -228,7 +228,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */

1
include/configs/MIP405.h
Unescape View File

@ -334,7 +334,6 @@
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
#define CONFIG_NET_MULTI
/************************************************************
* RTC
***********************************************************/

1
include/configs/MOUSSE.h
Unescape View File

@ -334,7 +334,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP

1
include/configs/MPC8308RDB.h
Unescape View File

@ -367,7 +367,6 @@
/*
* TSEC
*/
#define CONFIG_NET_MULTI
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)

1
include/configs/MPC8313ERDB.h
Unescape View File

@ -372,7 +372,6 @@
*/
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
#define CONFIG_NET_MULTI
#define CONFIG_GMII /* MII PHY management */
#ifdef CONFIG_TSEC1

5
include/configs/MPC8315ERDB.h
Unescape View File

@ -402,17 +402,12 @@
#define CONFIG_PCI
#define CONFIG_PCIE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_SYS_SCCR_USBDRCM 3

6
include/configs/MPC8323ERDB.h
Unescape View File

@ -318,7 +318,6 @@
#ifdef CONFIG_PCI
#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -327,11 +326,6 @@
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
/*
* QE UEC ethernet configuration
*/

6
include/configs/MPC832XEMDS.h
Unescape View File

@ -332,7 +332,6 @@
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_83XX_PCI_STREAMING
@ -342,11 +341,6 @@
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
/*
* QE UEC ethernet configuration
*/

4
include/configs/MPC8349EMDS.h
Unescape View File

@ -386,7 +386,6 @@
#undef PCI_ONE_PCI1
#endif
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_83XX_PCI_STREAMING
@ -410,9 +409,6 @@
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_GMII 1 /* MII PHY management */
#define CONFIG_TSEC1 1

2
include/configs/MPC8349ITX.h
Unescape View File

@ -384,7 +384,6 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */
#endif
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#ifndef CONFIG_PCI_PNP
@ -408,7 +407,6 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifdef CONFIG_TSEC_ENET
#define CONFIG_NET_MULTI
#define CONFIG_MII
#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */

5
include/configs/MPC8360EMDS.h
Unescape View File

@ -370,7 +370,6 @@
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_83XX_PCI_STREAMING
@ -381,10 +380,6 @@
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_HWCONFIG 1
/*

6
include/configs/MPC8360ERDK.h
Unescape View File

@ -290,7 +290,6 @@
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -299,11 +298,6 @@
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
/*
* QE UEC ethernet configuration
*/

5
include/configs/MPC837XEMDS.h
Unescape View File

@ -385,7 +385,6 @@ extern int board_pci_host_broken(void);
#define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -393,10 +392,6 @@ extern int board_pci_host_broken(void);
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
/*
* TSEC
*/

2
include/configs/MPC837XERDB.h
Unescape View File

@ -399,7 +399,6 @@
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@ -411,7 +410,6 @@
*/
#ifdef CONFIG_TSEC_ENET
#define CONFIG_NET_MULTI
#define CONFIG_GMII /* MII PHY management */
#define CONFIG_TSEC1

5
include/configs/MPC8536DS.h
Unescape View File

@ -542,7 +542,6 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/*PCIE video card used*/
@ -600,10 +599,6 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_TSEC1 1

5
include/configs/MPC8540ADS.h
Unescape View File

@ -289,7 +289,6 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -309,10 +308,6 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "TSEC0"

5
include/configs/MPC8541CDS.h
Unescape View File

@ -331,7 +331,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_MPC85XX_PCI2
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -345,10 +344,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "TSEC0"

5
include/configs/MPC8544DS.h
Unescape View File

@ -320,7 +320,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -350,10 +349,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_TSEC1 1

5
include/configs/MPC8548CDS.h
Unescape View File

@ -377,7 +377,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -390,10 +389,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC0"

5
include/configs/MPC8555CDS.h
Unescape View File

@ -328,7 +328,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_MPC85XX_PCI2
@ -343,10 +342,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "TSEC0"

5
include/configs/MPC8560ADS.h
Unescape View File

@ -283,7 +283,6 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -303,10 +302,6 @@
#ifdef CONFIG_TSEC_ENET
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#ifndef CONFIG_MII
#define CONFIG_MII 1 /* MII PHY management */
#endif

5
include/configs/MPC8568MDS.h
Unescape View File

@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -358,10 +357,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_MII 1 /* MII PHY management */

5
include/configs/MPC8569MDS.h
Unescape View File

@ -480,7 +480,6 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -491,10 +490,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
/*
* Environment
*/

5
include/configs/MPC8572DS.h
Unescape View File

@ -540,7 +540,6 @@
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -571,10 +570,6 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_TSEC1 1

1
include/configs/MPC8610HPCD.h
Unescape View File

@ -298,7 +298,6 @@
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_NET_MULTI
#define CONFIG_CMD_NET
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_CMD_REGINFO

5
include/configs/MPC8641HPCN.h
Unescape View File

@ -371,7 +371,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_RTL8139
@ -428,10 +427,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1

1
include/configs/MUSENKI.h
Unescape View File

@ -90,7 +90,6 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP

1
include/configs/MVBC_P.h
Unescape View File

@ -261,7 +261,6 @@
/*
* Ethernet configuration
*/
#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_E1000

1
include/configs/MVBLM7.h
Unescape View File

@ -184,7 +184,6 @@
#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_RETRY_COUNT 3
#define CONFIG_PCI_66M

1
include/configs/MVBLUE.h
Unescape View File

@ -158,7 +158,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_TULIP

1
include/configs/MigoR.h
Unescape View File

@ -50,7 +50,6 @@
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SMC9111 */
#define CONFIG_NET_MULTI
#define CONFIG_SMC91111
#define CONFIG_SMC91111_BASE (0xB0000000)

1
include/configs/NETPHONE.h
Unescape View File

@ -99,7 +99,6 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CONFIG_SYS_DISCOVER_PHY
#define CONFIG_MII 1

1
include/configs/NETTA.h
Unescape View File

@ -95,7 +95,6 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */
#define CONFIG_MII 1

1
include/configs/NETTA2.h
Unescape View File

@ -100,7 +100,6 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CONFIG_SYS_DISCOVER_PHY
#define CONFIG_MII 1

1
include/configs/OCRTC.h
Unescape View File

@ -56,7 +56,6 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_NET_MULTI
/*

1
include/configs/ORSG.h
Unescape View File

@ -54,7 +54,6 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_NET_MULTI
/*

1
include/configs/OXC.h
Unescape View File

@ -106,7 +106,6 @@
#define CONFIG_PCI /* include pci support */
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

2
include/configs/P1022DS.h
Unescape View File

@ -336,7 +336,6 @@
#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_E1000 /* Define e1000 pci Ethernet card */
@ -380,7 +379,6 @@
#ifdef CONFIG_TSEC_ENET
#define CONFIG_TSECV2
#define CONFIG_NET_MULTI
#define CONFIG_MII /* MII PHY management */
#define CONFIG_TSEC1 1

5
include/configs/P1023RDS.h
Unescape View File

@ -394,15 +394,10 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI
#endif
/*
* Environment
*/

1
include/configs/P1_P2_RDB.h
Unescape View File

@ -471,7 +471,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif /* CONFIG_PCI */
#define CONFIG_NET_MULTI 1
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_MII 1 /* MII PHY management */

5
include/configs/P2020DS.h
Unescape View File

@ -528,7 +528,6 @@
#endif
#define CONFIG_SYS_SRIO2_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -558,10 +557,6 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_TSEC1 1

1
include/configs/P2041RDB.h
Unescape View File

@ -437,7 +437,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#endif
#ifdef CONFIG_PCI
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_E1000

1
include/configs/P3G4.h
Unescape View File

@ -68,7 +68,6 @@
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 0
#define CONFIG_NET_MULTI /* attempt all available adapters */
/* define this if you want to enable GT MAC filtering */
#define CONFIG_GT_USE_MAC_HASH_TABLE

1
include/configs/PCIPPC2.h
Unescape View File

@ -243,7 +243,6 @@
#define CONFIG_WATCHDOG
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

1
include/configs/PCIPPC6.h
Unescape View File

@ -245,7 +245,6 @@
#define CONFIG_WATCHDOG
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */

1
include/configs/PIP405.h
Unescape View File

@ -277,7 +277,6 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_NET_MULTI
/************************************************************
* RTC
***********************************************************/

1
include/configs/PK1C20.h
Unescape View File

@ -154,7 +154,6 @@
* cache bypass so there's no need to monkey with inx/outx macros.
*----------------------------------------------------------------------*/
#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
#define CONFIG_NET_MULTI
#define CONFIG_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */

1
include/configs/PLU405.h
Unescape View File

@ -53,7 +53,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_NET_MULTI 1
#undef CONFIG_HAS_ETH1
#define CONFIG_PPC4xx_EMAC

Some files were not shown because too many files have changed in this diff Show More

Write Preview
Loading…
Cancel
Save