mpc83xx: Add UPMA configuration to SIMPC8313

Added UPM array table, upmconfig, and Local Bus configuration support for SIMPC8313

Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

arch/powerpc/include/asm/fsl_lbc.h

@@ -245,6 +245,7 @@
 #define MxMR_DSx_4_CYCL		0x00c00000 /* 4 cycle Disable Period	   */
 #define MxMR_DSx_MSK		0x00c00000 /* Disable Timer Period Mask	   */
 #define MxMR_AMx_MSK		0x07000000 /* Addess Multiplex Size Mask   */
+#define MxMR_UWPL		0x08000000 /* LUPWAIT Polarity Mask	   */
 #define MxMR_OP_NORM		0x00000000 /* Normal Operation		   */
 #define MxMR_OP_WARR		0x10000000 /* Write to Array		   */
 #define MxMR_OP_RARR		0x20000000 /* Read from Array		   */

board/sheldon/simpc8313/simpc8313.c

@@ -29,6 +29,7 @@
 #include <mpc83xx.h>
 #include <ns16550.h>
 #include <nand.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -91,6 +92,40 @@ void pci_init_board(void)
 int misc_init_r(void)
 {
 	int rc = 0;
+	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	fsl_lbus_t *lbus = &immap->lbus;
+	u32 *mxmr = &lbus->mamr;	/* Pointer to mamr */
+
+	/* UPM Table Configuration Code */
+	static uint UPMATable[] = {
+		/* Read Single-Beat (RSS) */
+		0x0fff0c00, 0x0fffdc00, 0x0fff0c05, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		/* Read Burst (RBS) */
+		0x0fff0c00, 0x0ffcdc00, 0x0ffc0c00, 0x0ffc0f0c,
+		0x0ffccf0c, 0x0ffc0f0c, 0x0ffcce0c, 0x3ffc0c05,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		/* Write Single-Beat (WSS) */
+		0x0ffc0c00, 0x0ffcdc00, 0x0ffc0c05, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		/* Write Burst (WBS) */
+		0x0ffc0c00, 0x0fffcc0c, 0x0fff0c00, 0x0fffcc00,
+		0x0fff1c00, 0x0fffcf0c, 0x0fff0f0c, 0x0fffcf0c,
+		0x0fff0c0c, 0x0fffcc0c, 0x0fff0c05, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		/* Refresh Timer (RTS) */
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+		/* Exception Condition (EXS) */
+		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
+	};
+
+	upmconfig(UPMA, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
+
+	/* Set LUPWAIT to be active low and enabled */
+	out_be32(mxmr, MxMR_UWPL | MxMR_GPL_x4DIS);
 
 	return rc;
 }

include/configs/SIMPC8313.h

@@ -126,6 +126,7 @@
 #else
 #define CONFIG_SYS_NAND_BASE		0xE2800000
 #endif
+#define CONFIG_SYS_FPGA_BASE		0xFF000000
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS			1
@@ -184,6 +185,16 @@
 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM	CONFIG_SYS_LBLAWBAR0_PRELIM
 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR0_PRELIM
 
+#define CONFIG_SYS_BR1_PRELIM		( CONFIG_SYS_FPGA_BASE \
+					| BR_PS_16 \
+					| BR_MS_UPMA \
+					| BR_V )
+#define CONFIG_SYS_OR1_PRELIM		( OR_AM_2MB \
+					| OR_UPM_BCTLD)
+
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_FPGA_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_2MB)
+
 /*
  * JFFS2 configuration
  */