MX: Added Freescale Power Management Driver

The patch add supports for the Freescale's Power
Management Controller (known as Atlas) used together with i.MX31/51
processors. It was tested with a MC13783 (MX31) and
MC13892 (MX51).

Signed-off-by: Stefano Babic <sbabic@denx.de>
master
Stefano Babic 15 years ago committed by Tom
parent 869e8ae032
commit 3bff02dc83
  1. 1
      drivers/misc/Makefile
  2. 200
      drivers/misc/fsl_pmic.c
  3. 128
      include/fsl_pmic.h

@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
COBJS-$(CONFIG_NS87308) += ns87308.o
COBJS-$(CONFIG_STATUS_LED) += status_led.o
COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
COBJS-$(CONFIG_FSL_PMIC) += fsl_pmic.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)

@ -0,0 +1,200 @@
/*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <spi.h>
#include <asm/errno.h>
#include <linux/types.h>
#include <fsl_pmic.h>
static struct spi_slave *slave;
struct spi_slave *pmic_spi_probe(void)
{
return spi_setup_slave(CONFIG_FSL_PMIC_BUS,
CONFIG_FSL_PMIC_CS,
CONFIG_FSL_PMIC_CLK,
CONFIG_FSL_PMIC_MODE);
}
void pmic_spi_free(struct spi_slave *slave)
{
if (slave)
spi_free_slave(slave);
}
u32 pmic_reg(u32 reg, u32 val, u32 write)
{
u32 pmic_tx, pmic_rx;
if (!slave) {
slave = pmic_spi_probe();
if (!slave)
return -1;
}
if (reg > 63 || write > 1) {
printf("<reg num> = %d is invalid. Should be less then 63\n",
reg);
return -1;
}
if (spi_claim_bus(slave))
return -1;
pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF);
if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
SPI_XFER_BEGIN | SPI_XFER_END)) {
spi_release_bus(slave);
return -1;
}
if (write) {
pmic_tx &= ~(1 << 31);
if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
SPI_XFER_BEGIN | SPI_XFER_END)) {
spi_release_bus(slave);
return -1;
}
}
spi_release_bus(slave);
return pmic_rx;
}
void pmic_reg_write(u32 reg, u32 value)
{
pmic_reg(reg, value, 1);
}
u32 pmic_reg_read(u32 reg)
{
return pmic_reg(reg, 0, 0);
}
void pmic_show_pmic_info(void)
{
u32 rev_id;
rev_id = pmic_reg_read(REG_IDENTIFICATION);
printf("PMIC ID: 0x%08x [Rev: ", rev_id);
switch (rev_id & 0x1F) {
case 0x1:
puts("1.0");
break;
case 0x9:
puts("1.1");
break;
case 0xA:
puts("1.2");
break;
case 0x10:
puts("2.0");
break;
case 0x11:
puts("2.1");
break;
case 0x18:
puts("3.0");
break;
case 0x19:
puts("3.1");
break;
case 0x1A:
puts("3.2");
break;
case 0x2:
puts("3.2A");
break;
case 0x1B:
puts("3.3");
break;
case 0x1D:
puts("3.5");
break;
default:
puts("unknown");
break;
}
puts("]\n");
}
static void pmic_dump(int numregs)
{
u32 val;
int i;
pmic_show_pmic_info();
for (i = 0; i < numregs; i++) {
val = pmic_reg_read(i);
if (!(i % 8))
printf ("\n0x%02x: ", i);
printf("%08x ", val);
}
puts("\n");
}
int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *cmd;
int nregs;
u32 val;
/* at least two arguments please */
if (argc < 2) {
cmd_usage(cmdtp);
return 1;
}
cmd = argv[1];
if (strcmp(cmd, "dump") == 0) {
if (argc < 3) {
cmd_usage(cmdtp);
return 1;
}
nregs = simple_strtoul(argv[2], NULL, 16);
pmic_dump(nregs);
return 0;
}
if (strcmp(cmd, "write") == 0) {
if (argc < 4) {
cmd_usage(cmdtp);
return 1;
}
nregs = simple_strtoul(argv[2], NULL, 16);
val = simple_strtoul(argv[3], NULL, 16);
pmic_reg_write(nregs, val);
return 0;
}
/* No subcommand found */
return 1;
}
U_BOOT_CMD(
pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
"Freescale PMIC (Atlas)",
"dump [numregs] dump registers\n"
"pmic write <reg> <value> - write register"
);

@ -0,0 +1,128 @@
/*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __FSL_PMIC_H__
#define __FSL_PMIC_H__
/*
* The registers of different PMIC has the same meaning
* but the bit positions of the fields can differ or
* some fields has a meaning only on some devices.
* You have to check with the internal SPI bitmap
* (see Freescale Documentation) to set the registers
* for the device you are using
*/
enum {
REG_INT_STATUS0 = 0,
REG_INT_MASK0,
REG_INT_SENSE0,
REG_INT_STATUS1,
REG_INT_MASK1,
REG_INT_SENSE1,
REG_PU_MODE_S,
REG_IDENTIFICATION,
REG_UNUSED0,
REG_ACC0,
REG_ACC1, /*10 */
REG_UNUSED1,
REG_UNUSED2,
REG_POWER_CTL0,
REG_POWER_CTL1,
REG_POWER_CTL2,
REG_REGEN_ASSIGN,
REG_UNUSED3,
REG_MEM_A,
REG_MEM_B,
REG_RTC_TIME, /*20 */
REG_RTC_ALARM,
REG_RTC_DAY,
REG_RTC_DAY_ALARM,
REG_SW_0,
REG_SW_1,
REG_SW_2,
REG_SW_3,
REG_SW_4,
REG_SW_5,
REG_SETTING_0, /*30 */
REG_SETTING_1,
REG_MODE_0,
REG_MODE_1,
REG_POWER_MISC,
REG_UNUSED4,
REG_UNUSED5,
REG_UNUSED6,
REG_UNUSED7,
REG_UNUSED8,
REG_UNUSED9, /*40 */
REG_UNUSED10,
REG_UNUSED11,
REG_ADC0,
REG_ADC1,
REG_ADC2,
REG_ADC3,
REG_ADC4,
REG_CHARGE,
REG_USB0,
REG_USB1, /*50 */
REG_LED_CTL0,
REG_LED_CTL1,
REG_LED_CTL2,
REG_LED_CTL3,
REG_UNUSED12,
REG_UNUSED13,
REG_TRIM0,
REG_TRIM1,
REG_TEST0,
REG_TEST1, /*60 */
REG_TEST2,
REG_TEST3,
REG_TEST4,
};
/* REG_POWER_MISC */
#define GPO1EN (1 << 6)
#define GPO1STBY (1 << 7)
#define GPO2EN (1 << 8)
#define GPO2STBY (1 << 9)
#define GPO3EN (1 << 10)
#define GPO3STBY (1 << 11)
#define GPO4EN (1 << 12)
#define GPO4STBY (1 << 13)
#define PWGT1SPIEN (1 << 15)
#define PWGT2SPIEN (1 << 16)
#define PWUP (1 << 21)
/* Power Control 0 */
#define COINCHEN (1 << 23)
#define BATTDETEN (1 << 19)
/* Interrupt status 1 */
#define RTCRSTI (1 << 7)
void pmic_show_pmic_info(void);
void pmic_reg_write(u32 reg, u32 value);
u32 pmic_reg_read(u32 reg);
#endif
Loading…
Cancel
Save