x86: Rename efi-x86 target to efi-x86_app

To avoid confusion, let's rename the efi-x86 target to efi-x86_app.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/x86/cpu/efi/Makefile

@@ -3,7 +3,7 @@
 # Copyright (c) 2015 Google, Inc
 
 ifdef CONFIG_EFI_APP
-obj-y += efi.o
+obj-y += app.o
 obj-y += sdram.o
 endif
 

arch/x86/cpu/intel_common/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += mrc.o
 endif
 obj-y += cpu.o
 obj-y += lpc.o
-ifndef CONFIG_TARGET_EFI
+ifndef CONFIG_TARGET_EFI_APP
 obj-y += microcode.o
 endif
 obj-y += pch.o

arch/x86/dts/Makefile

@@ -10,7 +10,7 @@ dtb-y += bayleybay.dtb \
 	crownbay.dtb \
 	dfi-bt700-q7x-151.dtb \
 	edison.dtb \
-	efi.dtb \
+	efi-x86_app.dtb \
 	efi-x86_payload.dtb \
 	galileo.dtb \
 	minnowmax.dtb \

arch/x86/dts/efi-x86_app.dts

@@ -9,8 +9,8 @@
 /include/ "tsc_timer.dtsi"
 
 / {
-	model = "EFI";
-	compatible = "efi,app";
+	model = "EFI x86 Application";
+	compatible = "efi,x86-app";
 
 	chosen {
 		stdout-path = &serial;

board/efi/Kconfig

@@ -4,8 +4,8 @@ choice
 	prompt "Mainboard model"
 	optional
 
-config TARGET_EFI
-	bool "efi"
+config TARGET_EFI_APP
+	bool "efi application"
 	help
 	  This target is used for running U-Boot on top of EFI. In
 	  this case EFI does the early initialisation, and U-Boot
@@ -22,7 +22,7 @@ config TARGET_EFI_PAYLOAD
 
 endchoice
 
-source "board/efi/efi-x86/Kconfig"
+source "board/efi/efi-x86_app/Kconfig"
 source "board/efi/efi-x86_payload/Kconfig"
 
 endif

board/efi/efi-x86_app/Kconfig

@@ -1,7 +1,7 @@
-if TARGET_EFI
+if TARGET_EFI_APP
 
 config SYS_BOARD
-	default "efi-x86"
+	default "efi-x86_app"
 
 config SYS_VENDOR
 	default "efi"
@@ -10,6 +10,6 @@ config SYS_SOC
 	default "efi"
 
 config SYS_CONFIG_NAME
-	default "efi-x86"
+	default "efi-x86_app"
 
 endif

board/efi/efi-x86_app/Makefile

@@ -2,4 +2,4 @@
 #
 # Copyright (c) 2015 Google, Inc
 
-obj-y	+= efi.o
+obj-y	+= app.o

configs/efi-x86_app_defconfig

@@ -2,8 +2,8 @@ CONFIG_X86=y
 CONFIG_DEBUG_UART_BASE=0
 CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_VENDOR_EFI=y
-CONFIG_DEFAULT_DEVICE_TREE="efi"
-CONFIG_TARGET_EFI=y
+CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app"
+CONFIG_TARGET_EFI_APP=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_USE_BOOTARGS=y

doc/README.u-boot_on_efi

@@ -65,10 +65,10 @@ for that board. It will be either 32-bit or 64-bit. Alternatively, you can
 opt for using QEMU [1] and the OVMF [2], as detailed below.
 
 To build U-Boot as an EFI application (32-bit EFI required), enable CONFIG_EFI
-and CONFIG_EFI_APP. The efi-x86 config (efi-x86_defconfig) is set up for this.
-Just build U-Boot as normal, e.g.
+and CONFIG_EFI_APP. The efi-x86_app config (efi-x86_app_defconfig) is set up
+for this. Just build U-Boot as normal, e.g.
 
-   make efi-x86_defconfig
+   make efi-x86_app_defconfig
    make
 
 To build U-Boot as an EFI payload (32-bit or 64-bit EFI can be used), enable
@@ -234,7 +234,7 @@ lib/efi
 arch/x86/cpu/efi
 	x86 support code for running as an EFI application and payload
 
-board/efi/efi-x86/efi.c
+board/efi/efi-x86_app/efi.c
 	x86 board code for running as an EFI application
 
 board/efi/efi-x86_payload