USB: sync Queue Element Transfer Descriptor against EHCI spec

Appendix B "EHCI 64-Bit Data Structures" of the "Enhanced Host
Controller Interface Specification for Universal Serial Bus" (Rev.
1.0, March 12, 2002) defines additional fields which were missing in
U-Boot's struct qTD; as these are also present in recent versions of
struct ehci_qtd in the Linux kernel, we add them here, too.

This fixes some nasty memory corruption problems.

Reported-by: Dan Lykowski <lykowdk@gmail.com>
See http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/76942

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Dan Lykowski <lykowdk@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>

drivers/usb/host/ehci-hcd.c

@@ -288,6 +288,7 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
 	idx = 0;
 	while (idx < 5) {
 		td->qt_buffer[idx] = cpu_to_hc32(addr);
+		td->qt_buffer_hi[idx] = 0;
 		next = (addr + 4096) & ~4095;
 		delta = next - addr;
 		if (delta >= sz)

drivers/usb/host/ehci.h

@@ -166,12 +166,16 @@ struct usb_linux_config_descriptor {
 
 /* Queue Element Transfer Descriptor (qTD). */
 struct qTD {
-	uint32_t qt_next;
+	/* this part defined by EHCI spec */
+	uint32_t qt_next;		/* see EHCI 3.5.1 */
 #define	QT_NEXT_TERMINATE	1
-	uint32_t qt_altnext;
-	uint32_t qt_token;
-	uint32_t qt_buffer[5];
-};
+	uint32_t qt_altnext;		/* see EHCI 3.5.2 */
+	uint32_t qt_token;		/* see EHCI 3.5.3 */
+	uint32_t qt_buffer[5];		/* see EHCI 3.5.4 */
+	uint32_t qt_buffer_hi[5];	/* Appendix B */
+	/* pad struct for 32 byte alignment */
+	uint32_t unused[3];
+} __attribute__ ((aligned (32)));
 
 /* Queue Head (QH). */
 struct QH {