ARM: kirkwood: Add device-tree for guruplug

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

arch/arm/dts/kirkwood-guruplug-server-plus.dts

@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		/* AzureWave AW-GH381 WiFi/BT */
+		mvsdio@90000 {
+			status = "okay";
+			non-removable;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+			      &pmx_led_wmode_r &pmx_led_wmode_g >;
+		pinctrl-names = "default";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

configs/guruplug_defconfig

@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_GURUPLUG=y
 CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
@@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)"
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
@@ -34,4 +36,3 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y