Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

T210: P2571: Enable SD-card power via PMIC LDO2

Browse Source 
This was done in the 32-bit AVP loader (SPL) but is
board-specific so should be moved to the CPU portion.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
master
Tom Warren 9 years ago
parent a5325cd5e9
commit 4132bc90e6
4 changed files with 24 additions and 87 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      board/nvidia/p2571/Makefile
  2. 85
      board/nvidia/p2571/max77620_init.c
  3. 3
      board/nvidia/p2571/max77620_init.h
  4. 22
      board/nvidia/p2571/p2571.c

1
board/nvidia/p2571/Makefile
Unescape View File

@ -5,5 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += max77620_init.o
obj-y += p2571.o

85
board/nvidia/p2571/max77620_init.c
Unescape View File

@ -1,85 +0,0 @@
/*
* (C) Copyright 2013-2015
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch-tegra/tegra_i2c.h>
#include "max77620_init.h"
/* MAX77620-PMIC-specific early init code - get CPU rails up, etc */
void tegra_i2c_ll_write_addr(uint addr, uint config)
{
struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
writel(addr, &reg->cmd_addr0);
writel(config, &reg->cnfg);
}
void tegra_i2c_ll_write_data(uint data, uint config)
{
struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
writel(data, &reg->cmd_data1);
writel(config, &reg->cnfg);
}
void pmic_enable_cpu_vdd(void)
{
uint reg;
debug("%s entry\n", __func__);
/* Setup/Enable GPIO5 - VDD_CPU_REG_EN */
debug("%s: Setting GPIO5 to enable CPU regulator\n", __func__);
/* B3=1=logic high,B2=dontcare,B1=0=output,B0=1=push-pull */
reg = 0x0900 | MAX77620_GPIO5_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
/* Setup/Enable GPIO1 - VDD_HDMI_5V0_BST_EN */
debug("%s: Setting GPIO1 to enable HDMI\n", __func__);
reg = 0x0900 | MAX77620_GPIO1_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
/* GPIO 0,1,5,6,7 = GPIO, 2,3,4 = alt mode */
reg = 0x1C00 | MAX77620_AME_GPIO;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
/* Disable SD1 Remote Sense, Set SD1 for LPDDR4 to 1.125v */
debug("%s: Set SD1 for LPDDR4, disable SD1RS, voltage to 1.125v\n",
__func__);
/* bit1=0, SD1 remote sense disabled */
reg = 0x0400 | MAX77620_CNFG2SD_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
/* SD1 output = 1.125V */
reg = 0x2A00 | MAX77620_SD1_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
reg = 0xF200 | MAX77620_CNFG1_L2_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
debug("%s: Set LDO1 for USB3 phy power to 1.05V??\n", __func__);
/* 0xCA for 105v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
reg = 0xCA00 | MAX77620_CNFG1_L1_REG;
tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2);
tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES);
udelay(10 * 1000);
}

3
board/nvidia/p2571/max77620_init.h
Unescape View File

@ -10,7 +10,8 @@
/* MAX77620-PMIC-specific early init regs */
#define MAX77620_I2C_ADDR 0x78 /* or 0x3C 7-bit */
#define MAX77620_I2C_ADDR 0x78
#define MAX77620_I2C_ADDR_7BIT 0x3C
#define MAX77620_SD0_REG 0x16
#define MAX77620_SD1_REG 0x17

22
board/nvidia/p2571/p2571.c
Unescape View File

@ -6,10 +6,32 @@
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include "max77620_init.h"
#include "pinmux-config-p2571.h"
void pin_mux_mmc(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
return;
}
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
val = 0xF2;
ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
}
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs

Write Preview
Loading…
Cancel
Save