Initial revision

include/asm-ppc/mc146818rtc.h

@@ -0,0 +1,27 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_PPC_MC146818RTC_H
+#define __ASM_PPC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_ALWAYS_BCD  1   /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* __ASM_PPC_MC146818RTC_H */

include/asm-ppc/pci_io.h

@@ -0,0 +1,43 @@
+/* originally from linux source (asm-ppc/io.h).
+ * Sanity added by Rob Taylor, Flying Pig Systems, 2000
+ */
+#ifndef _PCI_IO_H_
+#define _PCI_IO_H_
+
+#include "io.h"
+
+
+#define pci_read_le16(addr, dest) \
+    __asm__ __volatile__("lhbrx %0,0,%1" : "=r" (dest) : \
+                  "r" (addr), "m" (*addr));
+
+#define pci_write_le16(addr, val) \
+    __asm__ __volatile__("sthbrx %1,0,%2" : "=m" (*addr) : \
+                  "r" (val), "r" (addr));
+
+
+#define pci_read_le32(addr, dest) \
+    __asm__ __volatile__("lwbrx %0,0,%1" : "=r" (dest) : \
+                 "r" (addr), "m" (*addr));
+
+#define pci_write_le32(addr, val) \
+__asm__ __volatile__("stwbrx %1,0,%2" : "=m" (*addr) : \
+                 "r" (val), "r" (addr));
+
+#define pci_readb(addr,b) ((b) = *(volatile u8 *) (addr))
+#define pci_writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
+
+#if !defined(__BIG_ENDIAN)
+#define pci_readw(addr,b) ((b) = *(volatile u16 *) (addr))
+#define pci_readl(addr,b) ((b) = *(volatile u32 *) (addr))
+#define pci_writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
+#define pci_writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
+#else
+#define pci_readw(addr,b) pci_read_le16((volatile u16 *)(addr),(b))
+#define pci_readl(addr,b) pci_read_le32((volatile u32 *)(addr),(b))
+#define pci_writew(b,addr) pci_write_le16((volatile u16 *)(addr),(b))
+#define pci_writel(b,addr) pci_write_le32((volatile u32 *)(addr),(b))
+#endif
+
+
+#endif /* _PCI_IO_H_ */

include/linux/mc146818rtc.h

@@ -0,0 +1,98 @@
+/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
+ * derived from Data Sheet, Copyright Motorola 1984 (!).
+ * It was written to be part of the Linux operating system.
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _MC146818RTC_H
+#define _MC146818RTC_H
+
+#include <asm/io.h>
+#include <linux/rtc.h>          /* get the user-level API */
+#include <asm/mc146818rtc.h>        /* register access macros */
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_SECONDS     0
+#define RTC_SECONDS_ALARM   1
+#define RTC_MINUTES     2
+#define RTC_MINUTES_ALARM   3
+#define RTC_HOURS       4
+#define RTC_HOURS_ALARM     5
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE    0xC0
+
+#define RTC_DAY_OF_WEEK     6
+#define RTC_DAY_OF_MONTH    7
+#define RTC_MONTH       8
+#define RTC_YEAR        9
+
+/* control registers - Moto names
+ */
+#define RTC_REG_A       10
+#define RTC_REG_B       11
+#define RTC_REG_C       12
+#define RTC_REG_D       13
+
+/**********************************************************************
+ * register details
+ **********************************************************************/
+#define RTC_FREQ_SELECT RTC_REG_A
+
+/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
+ * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
+ * totalling to a max high interval of 2.228 ms.
+ */
+# define RTC_UIP        0x80
+# define RTC_DIV_CTL        0x70
+   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
+#  define RTC_REF_CLCK_4MHZ 0x00
+#  define RTC_REF_CLCK_1MHZ 0x10
+#  define RTC_REF_CLCK_32KHZ    0x20
+   /* 2 values for divider stage reset, others for "testing purposes only" */
+#  define RTC_DIV_RESET1    0x60
+#  define RTC_DIV_RESET2    0x70
+  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
+# define RTC_RATE_SELECT    0x0F
+
+/**********************************************************************/
+#define RTC_CONTROL RTC_REG_B
+# define RTC_SET 0x80       /* disable updates for clock setting */
+# define RTC_PIE 0x40       /* periodic interrupt enable */
+# define RTC_AIE 0x20       /* alarm interrupt enable */
+# define RTC_UIE 0x10       /* update-finished interrupt enable */
+# define RTC_SQWE 0x08      /* enable square-wave output */
+# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
+# define RTC_24H 0x02       /* 24 hour mode - else hours bit 7 means pm */
+# define RTC_DST_EN 0x01    /* auto switch DST - works f. USA only */
+
+/**********************************************************************/
+#define RTC_INTR_FLAGS  RTC_REG_C
+/* caution - cleared by read */
+# define RTC_IRQF 0x80      /* any of the following 3 is active */
+# define RTC_PF 0x40
+# define RTC_AF 0x20
+# define RTC_UF 0x10
+
+/**********************************************************************/
+#define RTC_VALID   RTC_REG_D
+# define RTC_VRT 0x80       /* valid RAM and time */
+/**********************************************************************/
+
+/* example: !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+ * determines if the following two #defines are needed
+ */
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+#endif /* _MC146818RTC_H */