In commit 06194b6b65 a separate header
file was introduced for the AM1808 EVM, include/configs/da850_am18xxevm.h.
Before this commit, the da850evm.h configuration file was used for both
the AM1808 and the OMAP-L138 EVMs. The only substantial difference
between the da850evm and the da850_am18xxevm configuration is a single
bit in the hardware revision that is passed to the Linux kernel.
This patch removes include/configs/da850_am18xxevm.h. Instead the
include/configs/da850evm.h configuration is used for AM18xx EVMs and
CONFIG_DA850_AM18X_EVM is defined in boards.cfg.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Tom Rini <trini@ti.com>
master
Christian Riesch
14 years ago
committed by
Albert ARIBAUD
parent
bc5833c49a
commit
441ea7c67b
@ -1,246 +0,0 @@ |
||||
/*
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* |
||||
* Based on davinci_dvevm.h. Original Copyrights follow: |
||||
* |
||||
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
/*
|
||||
* Board |
||||
*/ |
||||
#define CONFIG_DRIVER_TI_EMAC |
||||
#define CONFIG_USE_SPIFLASH |
||||
|
||||
|
||||
/*
|
||||
* SoC Configuration |
||||
*/ |
||||
#define CONFIG_MACH_DAVINCI_DA850_EVM |
||||
#define CONFIG_ARM926EJS /* arm926ejs CPU core */ |
||||
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ |
||||
#define CONFIG_SOC_DA850 /* TI DA850 SoC */ |
||||
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) |
||||
#define CONFIG_SYS_OSCIN_FREQ 24000000 |
||||
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE |
||||
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) |
||||
#define CONFIG_SYS_HZ 1000 |
||||
#define CONFIG_SKIP_LOWLEVEL_INIT |
||||
#define CONFIG_SYS_TEXT_BASE 0xc1080000 |
||||
#define CONFIG_DA850_AM18X_EVM |
||||
/*
|
||||
* Memory Info |
||||
*/ |
||||
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ |
||||
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ |
||||
#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ |
||||
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ |
||||
|
||||
/* memtest start addr */ |
||||
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) |
||||
|
||||
/* memtest will be run on 16MB */ |
||||
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) |
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
||||
#define CONFIG_STACKSIZE (256*1024) /* regular stack */ |
||||
|
||||
/*
|
||||
* Serial Driver info |
||||
*/ |
||||
#define CONFIG_SYS_NS16550 |
||||
#define CONFIG_SYS_NS16550_SERIAL |
||||
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ |
||||
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ |
||||
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) |
||||
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ |
||||
#define CONFIG_BAUDRATE 115200 /* Default baud rate */ |
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
||||
|
||||
#define CONFIG_SPI |
||||
#define CONFIG_SPI_FLASH |
||||
#define CONFIG_SPI_FLASH_WINBOND |
||||
#define CONFIG_DAVINCI_SPI |
||||
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE |
||||
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) |
||||
#define CONFIG_SF_DEFAULT_SPEED 30000000 |
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED |
||||
|
||||
/*
|
||||
* I2C Configuration |
||||
*/ |
||||
#define CONFIG_HARD_I2C |
||||
#define CONFIG_DRIVER_DAVINCI_I2C |
||||
#define CONFIG_SYS_I2C_SPEED 25000 |
||||
#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ |
||||
#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 |
||||
|
||||
/*
|
||||
* Flash & Environment |
||||
*/ |
||||
#ifdef CONFIG_USE_NAND |
||||
#undef CONFIG_ENV_IS_IN_FLASH |
||||
#define CONFIG_NAND_DAVINCI |
||||
#define CONFIG_SYS_NO_FLASH |
||||
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ |
||||
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ |
||||
#define CONFIG_ENV_SIZE (128 << 10) |
||||
#define CONFIG_SYS_NAND_USE_FLASH_BBT |
||||
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST |
||||
#define CONFIG_SYS_NAND_PAGE_2K |
||||
#define CONFIG_SYS_NAND_CS 3 |
||||
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE |
||||
#define CONFIG_SYS_CLE_MASK 0x10 |
||||
#define CONFIG_SYS_ALE_MASK 0x8 |
||||
#undef CONFIG_SYS_NAND_HW_ECC |
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ |
||||
#define NAND_MAX_CHIPS 1 |
||||
#endif |
||||
|
||||
/*
|
||||
* Network & Ethernet Configuration |
||||
*/ |
||||
#ifdef CONFIG_DRIVER_TI_EMAC |
||||
#define CONFIG_EMAC_MDIO_PHY_NUM 0 |
||||
#define CONFIG_MII |
||||
#define CONFIG_BOOTP_DEFAULT |
||||
#define CONFIG_BOOTP_DNS |
||||
#define CONFIG_BOOTP_DNS2 |
||||
#define CONFIG_BOOTP_SEND_HOSTNAME |
||||
#define CONFIG_NET_RETRY_COUNT 10 |
||||
#define CONFIG_NET_MULTI |
||||
#endif |
||||
|
||||
#ifdef CONFIG_USE_NOR |
||||
#define CONFIG_ENV_IS_IN_FLASH |
||||
#define CONFIG_FLASH_CFI_DRIVER |
||||
#define CONFIG_SYS_FLASH_CFI |
||||
#define CONFIG_SYS_FLASH_PROTECTION |
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ |
||||
#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ |
||||
#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) |
||||
#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ |
||||
#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE |
||||
#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ |
||||
#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ |
||||
+ 3) |
||||
#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ |
||||
#endif |
||||
|
||||
#ifdef CONFIG_USE_SPIFLASH |
||||
#undef CONFIG_ENV_IS_IN_FLASH |
||||
#undef CONFIG_ENV_IS_IN_NAND |
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH |
||||
#define CONFIG_ENV_SIZE (64 << 10) |
||||
#define CONFIG_ENV_OFFSET (256 << 10) |
||||
#define CONFIG_ENV_SECT_SIZE (64 << 10) |
||||
#define CONFIG_SYS_NO_FLASH |
||||
#endif |
||||
|
||||
/*
|
||||
* U-Boot general configuration |
||||
*/ |
||||
#define CONFIG_MISC_INIT_R |
||||
#define CONFIG_BOOTFILE "uImage" /* Boot file name */ |
||||
#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ |
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ |
||||
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) |
||||
#define CONFIG_VERSION_VARIABLE |
||||
#define CONFIG_AUTO_COMPLETE |
||||
#define CONFIG_SYS_HUSH_PARSER |
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
||||
#define CONFIG_CMDLINE_EDITING |
||||
#define CONFIG_SYS_LONGHELP |
||||
#define CONFIG_CRC32_VERIFY |
||||
#define CONFIG_MX_CYCLIC |
||||
|
||||
/*
|
||||
* Linux Information |
||||
*/ |
||||
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) |
||||
#define CONFIG_HWCONFIG /* enable hwconfig */ |
||||
#define CONFIG_CMDLINE_TAG |
||||
#define CONFIG_REVISION_TAG |
||||
#define CONFIG_SETUP_MEMORY_TAGS |
||||
#define CONFIG_BOOTARGS \ |
||||
"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" |
||||
#define CONFIG_BOOTDELAY 3 |
||||
#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" |
||||
|
||||
/*
|
||||
* U-Boot commands |
||||
*/ |
||||
#include <config_cmd_default.h> |
||||
#define CONFIG_CMD_ENV |
||||
#define CONFIG_CMD_ASKENV |
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_DIAG |
||||
#define CONFIG_CMD_MII |
||||
#define CONFIG_CMD_PING |
||||
#define CONFIG_CMD_SAVES |
||||
#define CONFIG_CMD_MEMORY |
||||
|
||||
#ifndef CONFIG_DRIVER_TI_EMAC |
||||
#undef CONFIG_CMD_NET |
||||
#undef CONFIG_CMD_DHCP |
||||
#undef CONFIG_CMD_MII |
||||
#undef CONFIG_CMD_PING |
||||
#endif |
||||
|
||||
#ifdef CONFIG_USE_NAND |
||||
#undef CONFIG_CMD_FLASH |
||||
#undef CONFIG_CMD_IMLS |
||||
#define CONFIG_CMD_NAND |
||||
|
||||
#define CONFIG_CMD_MTDPARTS |
||||
#define CONFIG_MTD_DEVICE |
||||
#define CONFIG_MTD_PARTITIONS |
||||
#define CONFIG_LZO |
||||
#define CONFIG_RBTREE |
||||
#define CONFIG_CMD_UBI |
||||
#define CONFIG_CMD_UBIFS |
||||
#endif |
||||
|
||||
#ifdef CONFIG_USE_SPIFLASH |
||||
#undef CONFIG_CMD_IMLS |
||||
#undef CONFIG_CMD_FLASH |
||||
#define CONFIG_CMD_SPI |
||||
#define CONFIG_CMD_SF |
||||
#define CONFIG_CMD_SAVEENV |
||||
#endif |
||||
|
||||
#if !defined(CONFIG_USE_NAND) && \ |
||||
!defined(CONFIG_USE_NOR) && \
|
||||
!defined(CONFIG_USE_SPIFLASH) |
||||
#define CONFIG_ENV_IS_NOWHERE |
||||
#define CONFIG_SYS_NO_FLASH |
||||
#define CONFIG_ENV_SIZE (16 << 10) |
||||
#undef CONFIG_CMD_IMLS |
||||
#undef CONFIG_CMD_ENV |
||||
#endif |
||||
|
||||
/* additions for new relocation code, must added to all boards */ |
||||
#define CONFIG_SYS_SDRAM_BASE 0xc0000000 |
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ |
||||
/* Fix this */ GENERATED_GBL_DATA_SIZE) |
||||
#endif /* __CONFIG_H */ |
||||
Loading…
Reference in new issue