ARM: at91: ma5d4: Swap SD/MMC controller order

The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which
is the version available on the market. Swap the controller order
to match this and future versions of the SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>

board/aries/ma5d4evk/ma5d4evk.c

@@ -205,14 +205,13 @@ int board_mmc_init(bd_t *bis)
 	at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
 	at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
 
-	ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+	ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
 	if (ret)	/* eMMC init failed, skip it. */
 		at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
 
 	/* Enable the power supply to On-board MicroSD */
 	at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
-
-	ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
+	ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
 	if (ret)	/* uSD init failed, power it down. */
 		at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
 

include/configs/ma5d4evk.h

@@ -130,9 +130,9 @@
 	"consdev=ttyS3\0"						\
 	"baudrate=115200\0"						\
 	"bootscript=boot.scr\0"						\
-	"bootdev=/dev/mmcblk1p1\0"					\
-	"bootpart=1:1\0"						\
-	"rootdev=/dev/mmcblk1p2\0"					\
+	"bootdev=/dev/mmcblk0p1\0"					\
+	"bootpart=0:1\0"						\
+	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
 	"dfu_alt_info=mmc raw 0 3867148288\0"				\
 	"kernel_addr_r=0x22000000\0"					\
@@ -189,8 +189,8 @@
 		"bootm ${kernel_addr_r}\0"				\
 	"try_bootscript="						\
 		"mmc rescan;"						\
-		"if test -e mmc ${bootpart} ${bootscript} ; then "	\
-		"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
+		"if test -e mmc 1:1 ${bootscript} ; then "		\
+		"if load mmc 1:1 ${kernel_addr_r} ${bootscript};"	\
 		"then ; "						\
 			"echo Running bootscript... ; "			\
 			"source ${kernel_addr_r} ; "			\