driver:usb:s3c_udc: add support for Exynos4x12

This patch add new defines for usb phy for Exynos4x12.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

drivers/usb/gadget/regs-otg.h

@@ -226,6 +226,11 @@ struct s3c_usbotg_reg {
 #define CLK_SEL_12MHZ                   (0x2 << 0)
 #define CLK_SEL_48MHZ                   (0x0 << 0)
 
+#define EXYNOS4X12_ID_PULLUP0		(0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0	(0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ	(0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ	(0x05 << 0)
+
 /* Device Configuration Register DCFG */
 #define DEV_SPEED_HIGH_SPEED_20         (0x0 << 0)
 #define DEV_SPEED_FULL_SPEED_20         (0x1 << 0)

drivers/usb/gadget/s3c_udc_otg.c

@@ -167,8 +167,13 @@ void otg_phy_init(struct s3c_udc *dev)
 		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
 			&~FORCE_SUSPEND_0), &phy->phypwr);
 
-	writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
-	       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+	if (s5p_cpu_id == 0x4412)
+		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+		       &phy->phyclk); /* PLL 24Mhz */
+	else
+		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
 
 	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
 	       | PHY_SW_RST0, &phy->rstcon);