Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

mx31: provide readable WEIM CS accessor

Browse Source 
setup_weimcs() and some macros are added to support the setup
for i.MX31 WEIM chip selects. As a compromise between verbosity
and readability an ASCII-art'ish bit comment is used instead of
bitfields.
All i.MX31 boards have been patched to use this approach using a
helper program to verify the changes.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
master
Helmut Raiger 13 years ago committed by Albert ARIBAUD
parent 43883dc3e5
commit 47c5455a48
8 changed files with 187 additions and 77 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 11
      arch/arm/cpu/arm1136/mx31/generic.c
  2. 35
      arch/arm/include/asm/arch-mx31/imx-regs.h
  3. 35
      arch/arm/include/asm/arch-mx31/sys_proto.h
  4. 86
      board/davedenx/qong/qong.c
  5. 14
      board/freescale/mx31ads/mx31ads.c
  6. 14
      board/freescale/mx31pdk/mx31pdk.c
  7. 41
      board/imx31_phycore/imx31_phycore.c
  8. 28
      board/logicpd/imx31_litekit/imx31_litekit.c

11
arch/arm/cpu/arm1136/mx31/generic.c
Unescape View File

@ -25,6 +25,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
@ -140,6 +141,16 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
}
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
{
struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE;
struct mx31_weim_cscr *cscr = &weim->cscr[cs];
writel(weimcs->upper, &cscr->upper);
writel(weimcs->lower, &cscr->lower);
writel(weimcs->additional, &cscr->additional);
}
struct mx3_cpu_type mx31_cpu_type[] = {
{ .srev = 0x00, .v = 0x10 },
{ .srev = 0x10, .v = 0x11 },

35
arch/arm/include/asm/arch-mx31/imx-regs.h
Unescape View File

@ -472,6 +472,18 @@ enum iomux_pins {
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
/* WEIM CS control registers */
struct mx31_weim_cscr {
u32 upper;
u32 lower;
u32 additional;
u32 reserved;
};
struct mx31_weim {
struct mx31_weim_cscr cscr[6];
};
#endif
#define __REG(x) (*((volatile u32 *)(x)))
@ -550,10 +562,27 @@ enum iomux_pins {
#define ESDCTL_BL(x) ((x) << 7)
#define ESDCTL_PRCT(x) ((x) << 0)
/* 13 fields of the upper CS control register */
#define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
cnc, wsc, ew, wws, edc) \
((sp) << 31 | (wp) << 30 | (bcd) << 28 | (psz) << 22 | (pme) << 21 |\
(sync) << 20 | (dol) << 16 | (cnc) << 14 | (wsc) << 8 | (ew) << 7 |\
(wws) << 4 | (edc) << 0)
/* 12 fields of the lower CS control register */
#define CSCR_L(oea, oen, ebwa, ebwn, \
csa, ebc, dsz, csn, psr, cre, wrap, csen) \
((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
(csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
(psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
/* 14 fields of the additional CS control register */
#define CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
wwu, age, cnc2, fce) \
((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
(mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
(dww) << 6 | (dct) << 4 | (wwu) << 3 |\
(age) << 2 | (cnc2) << 1 | (fce) << 0)
#define WEIM_BASE 0xb8002000
#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
#define IOMUXC_BASE 0x43FAC000
#define IOMUXC_GPR (IOMUXC_BASE + 0x8)

35
arch/arm/include/asm/arch-mx31/sys_proto.h
Unescape View File

@ -0,0 +1,35 @@
/*
* (C) Copyright 2011
* Helmut Raiger, HALE electronic GmbH, helmut.raiger@hale.at
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
struct mxc_weimcs {
u32 upper;
u32 lower;
u32 additional;
};
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
#endif

86
board/davedenx/qong/qong.c
Unescape View File

@ -25,6 +25,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <nand.h>
#include <fsl_pmic.h>
@ -61,11 +62,17 @@ static void qong_fpga_reset(void)
int board_early_init_f (void)
{
#ifdef CONFIG_QONG_FPGA
/* CS1: FPGA/Network Controller/GPIO */
/* 16-bit, no DTACK */
__REG(CSCR_U(1)) = 0x00000A01;
__REG(CSCR_L(1)) = 0x20040501;
__REG(CSCR_A(1)) = 0x04020C00;
/* CS1: FPGA/Network Controller/GPIO, 16-bit, no DTACK */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 1),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 0, 0, 4, 0, 0, 5, 0, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 4, 0, 2, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(1, &cs1);
/* setup pins for FPGA */
mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO));
@ -146,50 +153,16 @@ int board_init (void)
/* Chip selects */
/* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */
/* Assumptions: HCLK = 133 MHz, tACC = 130ns */
__REG(CSCR_U(0)) = ((0 << 31) | /* SP */
(0 << 30) | /* WP */
(0 << 28) | /* BCD */
(0 << 24) | /* BCS */
(0 << 22) | /* PSZ */
(0 << 21) | /* PME */
(0 << 20) | /* SYNC */
(0 << 16) | /* DOL */
(3 << 14) | /* CNC */
(21 << 8) | /* WSC */
(0 << 7) | /* EW */
(0 << 4) | /* WWS */
(6 << 0) /* EDC */
);
__REG(CSCR_L(0)) = ((2 << 28) | /* OEA */
(1 << 24) | /* OEN */
(3 << 20) | /* EBWA */
(3 << 16) | /* EBWN */
(1 << 12) | /* CSA */
(1 << 11) | /* EBC */
(5 << 8) | /* DSZ */
(1 << 4) | /* CSN */
(0 << 3) | /* PSR */
(0 << 2) | /* CRE */
(0 << 1) | /* WRAP */
(1 << 0) /* CSEN */
);
__REG(CSCR_A(0)) = ((2 << 28) | /* EBRA */
(1 << 24) | /* EBRN */
(2 << 20) | /* RWA */
(2 << 16) | /* RWN */
(0 << 15) | /* MUM */
(0 << 13) | /* LAH */
(2 << 10) | /* LBN */
(0 << 8) | /* LBA */
(0 << 6) | /* DWW */
(0 << 4) | /* DCT */
(0 << 3) | /* WWU */
(0 << 2) | /* AGE */
(0 << 1) | /* CNC2 */
(0 << 0) /* FCE */
);
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 21, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(0, 1, 3, 3, 1, 1, 5, 1, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 1, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_QONG;
@ -247,11 +220,18 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT)
static void board_nand_setup(void)
{
/* CS3: NAND 8-bit */
__REG(CSCR_U(3)) = 0x00004f00;
__REG(CSCR_L(3)) = 0x20013b31;
__REG(CSCR_A(3)) = 0x00020800;
static const struct mxc_weimcs cs3 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 1, 15, 0, 0, 0),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 0, 0, 1, 3, 1, 3, 3, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 0, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(3, &cs3);
__REG(IOMUXC_GPR) |= 1 << 13;
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));

14
board/freescale/mx31ads/mx31ads.c
Unescape View File

@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@ -48,9 +49,16 @@ int board_early_init_f(void)
* the only non-zero field "Wait State Control" is set to half the
* default value.
*/
__REG(CSCR_U(0)) = 0x00000f00;
__REG(CSCR_L(0)) = 0x10000D03;
__REG(CSCR_A(0)) = 0x00720900;
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);

14
board/freescale/mx31pdk/mx31pdk.c
Unescape View File

@ -28,6 +28,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
@ -50,9 +51,16 @@ int dram_init(void)
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
__REG(CSCR_U(5)) = 0x0000d843;
__REG(CSCR_L(5)) = 0x22252521;
__REG(CSCR_A(5)) = 0x22220a00;
static const struct mxc_weimcs cs5 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(5, &cs5);
/* Setup UART1 and SPI2 pins */
mx31_uart1_hw_init();

41
board/imx31_phycore/imx31_phycore.c
Unescape View File

@ -27,6 +27,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@ -49,17 +50,39 @@ int board_init(void)
int board_early_init_f(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0x10000d03;
__REG(CSCR_A(0)) = 0x00720900;
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
/* CS1: Network Controller */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
__REG(CSCR_L(1)) = 0x444a4541;
__REG(CSCR_A(1)) = 0x44443302;
/* CS4: SRAM */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
__REG(CSCR_L(4)) = 0x22252521;
__REG(CSCR_A(4)) = 0x22220a00;
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(1, &cs1);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);

28
board/logicpd/imx31_litekit/imx31_litekit.c
Unescape View File

@ -26,6 +26,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@ -39,13 +40,28 @@ int dram_init(void)
int board_early_init_f(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0xa0330d01;
__REG(CSCR_A(0)) = 0x00220800;
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(10, 0, 3, 3, 0, 1, 5, 0, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
__REG(CSCR_L(4)) = 0x444a4541;
__REG(CSCR_A(4)) = 0x44443302;
/* CS4: Network Controller */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);

Write Preview
Loading…
Cancel
Save