powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option

Move default value definitions to Kconfig SYS_CCSRBAR_DEFAULT.

Signed-off-by: York Sun <york.sun@nxp.com>
master
York Sun 8 years ago
parent 830fc1bfe7
commit 4a1e6810a2
  1. 9
      arch/powerpc/cpu/mpc86xx/Kconfig
  2. 1
      include/configs/MPC8610HPCD.h
  3. 1
      include/configs/MPC8641HPCN.h
  4. 1
      include/configs/sbc8641d.h
  5. 1
      include/configs/xpedite517x.h

@ -32,6 +32,15 @@ config ARCH_MPC8610
config ARCH_MPC8641
bool
config SYS_CCSRBAR_DEFAULT
hex "Default CCSRBAR address"
default 0xff700000 if ARCH_MPC8610 || ARCH_MPC8641
help
Default value of CCSRBAR comes from power-on-reset. It
is fixed on each SoC. Some SoCs can have different value
if changed by pre-boot regime. The value here must match
the current value in SoC. If not sure, do not change.
source "board/freescale/mpc8610hpcd/Kconfig"
source "board/freescale/mpc8641hpcn/Kconfig"
source "board/sbc8641d/Kconfig"

@ -72,7 +72,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */

@ -87,7 +87,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */

@ -87,7 +87,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */

@ -76,7 +76,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR

Loading…
Cancel
Save