ARM: OMAP: hide custom bit manipulation function sr32()

The only remaining user of the custom bit manipulation function sr32()
is arch/arm/cpu/armv7/omap3/clock.c, so  make it a static function in
that file to prepare complete removal.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

arch/arm/cpu/armv7/omap3/clock.c

@@ -21,6 +21,19 @@
 #include <environment.h>
 #include <command.h>
 
+/*
+ * sr32 - clear & set a value in a bit range for a 32 bit address
+ */
+static inline void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
+{
+	u32 tmp, msk = 0;
+	msk = 1 << num_bits;
+	--msk;
+	tmp = readl((u32)addr) & ~(msk << start_bit);
+	tmp |= value << start_bit;
+	writel(tmp, (u32)addr);
+}
+
 /******************************************************************************
  * get_sys_clk_speed() - determine reference oscillator speed
  *                       based on known 32kHz clock and gptimer.

arch/arm/cpu/armv7/syslib.c

@@ -24,19 +24,6 @@ void sdelay(unsigned long loops)
 			  "bne 1b":"=r" (loops):"0"(loops));
 }
 
-/*****************************************************************
- * sr32 - clear & set a value in a bit range for a 32 bit address
- *****************************************************************/
-void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
-{
-	u32 tmp, msk = 0;
-	msk = 1 << num_bits;
-	--msk;
-	tmp = readl((u32)addr) & ~(msk << start_bit);
-	tmp |= value << start_bit;
-	writel(tmp, (u32)addr);
-}
-
 /*********************************************************************
  * wait_on_value() - common routine to allow waiting for changes in
  *   volatile regs.

arch/arm/include/asm/arch-omap3/sys_proto.h

@@ -62,7 +62,6 @@ void secureworld_exit(void);
 void try_unlock_memory(void);
 u32 get_boot_type(void);
 void invalidate_dcache(u32);
-void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void make_cs1_contiguous(void);

arch/arm/include/asm/arch-omap4/sys_proto.h

@@ -31,7 +31,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void set_pl310_ctrl_reg(u32 val);

arch/arm/include/asm/arch-omap5/sys_proto.h

@@ -32,7 +32,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void setup_clocks_for_console(void);