mtd,ubi,ubifs: sync with linux v3.15

snyc with linux v3.15:

commit 1860e379875dfe7271c649058aeddffe5afd9d0d
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Jun 8 11:19:54 2014 -0700

    Linux 3.15

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Tom Rini <trini@ti.com>

drivers/mtd/mtdcore.c

@@ -1011,14 +1011,14 @@ EXPORT_SYMBOL_GPL(mtd_read_oob);
  * devices. The user data is one time programmable but the factory data is read
  * only.
  */
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len)
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
 {
 	if (!mtd->_get_fact_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_fact_prot_info(mtd, buf, len);
+	return mtd->_get_fact_prot_info(mtd, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
 
@@ -1034,14 +1034,14 @@ int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 }
 EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
 
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len)
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
 {
 	if (!mtd->_get_user_prot_info)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_get_user_prot_info(mtd, buf, len);
+	return mtd->_get_user_prot_info(mtd, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
 
@@ -1060,12 +1060,22 @@ EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, u_char *buf)
 {
+	int ret;
+
 	*retlen = 0;
 	if (!mtd->_write_user_prot_reg)
 		return -EOPNOTSUPP;
 	if (!len)
 		return 0;
-	return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	if (ret)
+		return ret;
+
+	/*
+	 * If no data could be written at all, we are out of memory and
+	 * must return -ENOSPC.
+	 */
+	return (*retlen) ? 0 : -ENOSPC;
 }
 EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
 

drivers/mtd/mtdpart.c

@@ -178,11 +178,12 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 						 retlen, buf);
 }
 
-static int part_get_user_prot_info(struct mtd_info *mtd,
-		struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->_get_user_prot_info(part->master, buf, len);
+	return part->master->_get_user_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
@@ -193,11 +194,12 @@ static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 						 retlen, buf);
 }
 
-static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-		size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->_get_fact_prot_info(part->master, buf, len);
+	return part->master->_get_fact_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,

drivers/mtd/nand/nand_base.c

@@ -744,7 +744,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	/* Serially input address */
 	if (column != -1) {
 		/* Adjust columns for 16 bit buswidth */
-		if ((chip->options & NAND_BUSWIDTH_16) &&
+		if (chip->options & NAND_BUSWIDTH_16 &&
 				!nand_opcode_8bits(command))
 			column >>= 1;
 		chip->cmd_ctrl(mtd, column, ctrl);
@@ -837,7 +837,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if ((chip->options & NAND_BUSWIDTH_16) &&
+			if (chip->options & NAND_BUSWIDTH_16 &&
 					!nand_opcode_8bits(command))
 				column >>= 1;
 			chip->cmd_ctrl(mtd, column, ctrl);
@@ -1346,9 +1346,11 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
  * @data_offs: offset of requested data within the page
  * @readlen: data length
  * @bufpoi: buffer to store read data
+ * @page: page number to read
  */
 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+			int page)
 {
 	int start_step, end_step, num_steps;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1356,13 +1358,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	int data_col_addr, i, gaps = 0;
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
-	int index = 0;
+	int index;
 	unsigned int max_bitflips = 0;
 
 	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
 	end_step = (data_offs + readlen - 1) / chip->ecc.size;
 	num_steps = end_step - start_step + 1;
+	index = start_step * chip->ecc.bytes;
 
 	/* Data size aligned to ECC ecc.size */
 	datafrag_len = num_steps * chip->ecc.size;
@@ -1399,8 +1402,6 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 		 * Send the command to read the particular ECC bytes take care
 		 * about buswidth alignment in read_buf.
 		 */
-		index = start_step * chip->ecc.bytes;
-
 		aligned_pos = eccpos[index] & ~(busw - 1);
 		aligned_len = eccfrag_len;
 		if (eccpos[index] & (busw - 1))
@@ -1725,7 +1726,8 @@ read_retry:
 			else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
 				 !oob)
 				ret = chip->ecc.read_subpage(mtd, chip,
-							col, bytes, bufpoi);
+							col, bytes, bufpoi,
+							page);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
 							  oob_required, page);
@@ -2189,7 +2191,7 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
 			oob += chip->ecc.prepad;
 		}
 
-		chip->read_buf(mtd, oob, eccbytes);
+		chip->write_buf(mtd, oob, eccbytes);
 		oob += eccbytes;
 
 		if (chip->ecc.postpad) {
@@ -3154,7 +3156,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 
 }
 
-#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 /* Sanitize ONFI strings so we can safely print them */
 #ifndef __UBOOT__
 static void sanitize_string(uint8_t *s, size_t len)
@@ -3189,6 +3190,7 @@ static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
 	return crc;
 }
 
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 /* Parse the Extended Parameter Page. */
 static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
 		struct nand_chip *chip, struct nand_onfi_params *p)
@@ -3304,15 +3306,6 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
-	/*
-	 * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
-	 * with NAND_BUSWIDTH_16
-	 */
-	if (chip->options & NAND_BUSWIDTH_16) {
-		pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
-		return 0;
-	}
-
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
 		for (j = 0; j < sizeof(*p); j++)
@@ -3409,6 +3402,87 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 #endif
 
 /*
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+					int *busw)
+{
+	struct nand_jedec_params *p = &chip->jedec_params;
+	struct jedec_ecc_info *ecc;
+	int val;
+	int i, j;
+
+	/* Try JEDEC for unknown chip or LP */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+	if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'C')
+		return 0;
+
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < sizeof(*p); j++)
+			((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+				le16_to_cpu(p->crc))
+			break;
+	}
+
+	if (i == 3) {
+		pr_err("Could not find valid JEDEC parameter page; aborting\n");
+		return 0;
+	}
+
+	/* Check version */
+	val = le16_to_cpu(p->revision);
+	if (val & (1 << 2))
+		chip->jedec_version = 10;
+	else if (val & (1 << 1))
+		chip->jedec_version = 1; /* vendor specific version */
+
+	if (!chip->jedec_version) {
+		pr_info("unsupported JEDEC version: %d\n", val);
+		return 0;
+	}
+
+	sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+	sanitize_string(p->model, sizeof(p->model));
+	if (!mtd->name)
+		mtd->name = p->model;
+
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize *= mtd->writesize;
+
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	chip->bits_per_cell = p->bits_per_cell;
+
+	if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+		*busw = NAND_BUSWIDTH_16;
+	else
+		*busw = 0;
+
+	/* ECC info */
+	ecc = &p->ecc_info[0];
+
+	if (ecc->codeword_size >= 9) {
+		chip->ecc_strength_ds = ecc->ecc_bits;
+		chip->ecc_step_ds = 1 << ecc->codeword_size;
+	} else {
+		pr_warn("Invalid codeword size\n");
+	}
+
+	return 1;
+}
+
+/*
  * nand_id_has_period - Check if an ID string has a given wraparound period
  * @id_data: the ID string
  * @arrlen: the length of the @id_data array
@@ -3718,10 +3792,10 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
  */
 static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
-						  int busw,
 						  int *maf_id, int *dev_id,
 						  struct nand_flash_dev *type)
 {
+	int busw;
 	int i, maf_idx;
 	u8 id_data[8];
 
@@ -3777,6 +3851,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 		/* Check is chip is ONFI compliant */
 		if (nand_flash_detect_onfi(mtd, chip, &busw))
 			goto ident_done;
+
+		/* Check if the chip is JEDEC compliant */
+		if (nand_flash_detect_jedec(mtd, chip, &busw))
+			goto ident_done;
 	}
 
 	if (!type->name)
@@ -3856,12 +3934,29 @@ ident_done:
 
 	pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
 		*maf_id, *dev_id);
+
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
-		chip->onfi_version ? chip->onfi_params.model : type->name);
+	if (chip->onfi_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->onfi_params.model);
+	else if (chip->jedec_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->jedec_params.model);
+	else
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				type->name);
 #else
-	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, type->name);
+	if (chip->jedec_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->jedec_params.model);
+	else
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				type->name);
+
+	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+		type->name);
 #endif
+
 	pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
 		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
 		mtd->writesize, mtd->oobsize);
@@ -3882,18 +3977,16 @@ ident_done:
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		    struct nand_flash_dev *table)
 {
-	int i, busw, nand_maf_id, nand_dev_id;
+	int i, nand_maf_id, nand_dev_id;
 	struct nand_chip *chip = mtd->priv;
 	struct nand_flash_dev *type;
 
-	/* Get buswidth to select the correct functions */
-	busw = chip->options & NAND_BUSWIDTH_16;
 	/* Set the default functions */
-	nand_set_defaults(chip, busw);
+	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
 
 	/* Read the flash type */
-	type = nand_get_flash_type(mtd, chip, busw,
-				&nand_maf_id, &nand_dev_id, table);
+	type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+				   &nand_dev_id, table);
 
 	if (IS_ERR(type)) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -3947,15 +4040,30 @@ int nand_scan_tail(struct mtd_info *mtd)
 	int i;
 	struct nand_chip *chip = mtd->priv;
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_buffers *nbuf;
 
 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
 	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
 			!(chip->bbt_options & NAND_BBT_USE_FLASH));
 
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
-	if (!chip->buffers)
-		return -ENOMEM;
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+#ifndef __UBOOT__
+		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+				+ mtd->oobsize * 3, GFP_KERNEL);
+		if (!nbuf)
+			return -ENOMEM;
+		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+#else
+		nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
+#endif
+
+		chip->buffers = nbuf;
+	} else {
+		if (!chip->buffers)
+			return -ENOMEM;
+	}
 
 	/* Set the internal oob buffer location, just after the page data */
 	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
@@ -4076,7 +4184,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	case NAND_ECC_SOFT_BCH:
 		if (!mtd_nand_has_bch()) {
-			pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
+			pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
 			BUG();
 		}
 		ecc->calculate = nand_bch_calculate_ecc;

drivers/mtd/nand/nand_ids.c

@@ -59,6 +59,9 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"TC58NVG6D2 64G 3.3V 8-bit",
 		{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
 		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+	{"SDTNRGAMA 64G 3.3V 8-bit",
+		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),

drivers/mtd/ubi/build.c

@@ -1331,6 +1331,15 @@ int ubi_init(void)
 		}
 	}
 
+	err = ubiblock_init();
+	if (err) {
+		ubi_err("block: cannot initialize, error %d", err);
+
+		/* See comment above re-ubi_is_module(). */
+		if (ubi_is_module())
+			goto out_detach;
+	}
+
 	return 0;
 
 out_detach:
@@ -1363,6 +1372,8 @@ void ubi_exit(void)
 {
 	int i;
 
+	ubiblock_exit();
+
 	for (i = 0; i < UBI_MAX_DEVICES; i++)
 		if (ubi_devices[i]) {
 			mutex_lock(&ubi_devices_mutex);

drivers/mtd/ubi/ubi.h

@@ -12,7 +12,6 @@
 
 #define __UBOOT__
 #ifndef __UBOOT__
-#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/rbtree.h>
@@ -884,6 +883,26 @@ int ubi_update_fastmap(struct ubi_device *ubi);
 int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		     int fm_anchor);
 
+/* block.c */
+#ifdef CONFIG_MTD_UBI_BLOCK
+int ubiblock_init(void);
+void ubiblock_exit(void);
+int ubiblock_create(struct ubi_volume_info *vi);
+int ubiblock_remove(struct ubi_volume_info *vi);
+#else
+static inline int ubiblock_init(void) { return 0; }
+static inline void ubiblock_exit(void) {}
+static inline int ubiblock_create(struct ubi_volume_info *vi)
+{
+	return -ENOSYS;
+}
+static inline int ubiblock_remove(struct ubi_volume_info *vi)
+{
+	return -ENOSYS;
+}
+#endif
+
+
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
  * @rb: a pointer to type 'struct rb_node' to use as a loop counter

drivers/mtd/ubi/wl.c

@@ -672,6 +672,8 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
 
 	e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
 	self_check_in_wl_tree(ubi, e, &ubi->free);
+	ubi->free_count--;
+	ubi_assert(ubi->free_count >= 0);
 	rb_erase(&e->u.rb, &ubi->free);
 
 	return e;
@@ -685,6 +687,9 @@ int ubi_wl_get_peb(struct ubi_device *ubi)
 	peb = __wl_get_peb(ubi);
 	spin_unlock(&ubi->wl_lock);
 
+	if (peb < 0)
+		return peb;
+
 	err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset,
 				    ubi->peb_size - ubi->vid_hdr_aloffset);
 	if (err) {
@@ -1077,6 +1082,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 
 			/* Give the unused PEB back */
 			wl_tree_add(e2, &ubi->free);
+			ubi->free_count++;
 			goto out_cancel;
 		}
 		self_check_in_wl_tree(ubi, e1, &ubi->used);

fs/ubifs/super.c

@@ -531,7 +531,7 @@ static void ubifs_evict_inode(struct inode *inode)
 	dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
 	ubifs_assert(!atomic_read(&inode->i_count));
 
-	truncate_inode_pages(&inode->i_data, 0);
+	truncate_inode_pages_final(&inode->i_data);
 
 	if (inode->i_nlink)
 		goto done;
@@ -1786,7 +1786,7 @@ static int ubifs_remount_rw(struct ubifs_info *c)
 	if (c->space_fixup) {
 		err = ubifs_fixup_free_space(c);
 		if (err)
-			return err;
+			goto out;
 	}
 
 	err = check_free_space(c);
@@ -2063,6 +2063,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 	int err;
 	struct ubifs_info *c = sb->s_fs_info;
 
+	sync_filesystem(sb);
 	dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags);
 
 	err = ubifs_parse_options(c, data, 1);

include/linux/mtd/mtd.h

@@ -219,12 +219,12 @@ struct mtd_info {
 			  struct mtd_oob_ops *ops);
 	int (*_write_oob) (struct mtd_info *mtd, loff_t to,
 			   struct mtd_oob_ops *ops);
-	int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				    size_t len);
+	int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
+				    size_t *retlen, struct otp_info *buf);
 	int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
 				    size_t len, size_t *retlen, u_char *buf);
-	int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				    size_t len);
+	int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
+				    size_t *retlen, struct otp_info *buf);
 	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
 				    size_t len, size_t *retlen, u_char *buf);
 	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
@@ -303,12 +303,12 @@ static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
 	return mtd->_write_oob(mtd, to, ops);
 }
 
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len);
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf);
 int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf);
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len);
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf);
 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf);
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,

include/linux/mtd/nand.h

@@ -59,15 +59,15 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
-#endif
-
+#else
 /*
  * This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
-#define NAND_MAX_OOBSIZE	744
-#define NAND_MAX_PAGESIZE	8192
+#define NAND_MAX_OOBSIZE       744
+#define NAND_MAX_PAGESIZE      8192
+#endif
 
 /*
  * Constants for hardware specific CLE/ALE/NCE function
@@ -385,6 +385,84 @@ struct nand_onfi_vendor_micron {
 	u8 param_revision;
 } __packed;
 
+struct jedec_ecc_info {
+	u8 ecc_bits;
+	u8 codeword_size;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS	(1 << 0)
+
+struct nand_jedec_params {
+	/* rev info and features block */
+	/* 'J' 'E' 'S' 'D'  */
+	u8 sig[4];
+	__le16 revision;
+	__le16 features;
+	u8 opt_cmd[3];
+	__le16 sec_cmd;
+	u8 num_of_param_pages;
+	u8 reserved0[18];
+
+	/* manufacturer information block */
+	char manufacturer[12];
+	char model[20];
+	u8 jedec_id[6];
+	u8 reserved1[10];
+
+	/* memory organization block */
+	__le32 byte_per_page;
+	__le16 spare_bytes_per_page;
+	u8 reserved2[6];
+	__le32 pages_per_block;
+	__le32 blocks_per_lun;
+	u8 lun_count;
+	u8 addr_cycles;
+	u8 bits_per_cell;
+	u8 programs_per_page;
+	u8 multi_plane_addr;
+	u8 multi_plane_op_attr;
+	u8 reserved3[38];
+
+	/* electrical parameter block */
+	__le16 async_sdr_speed_grade;
+	__le16 toggle_ddr_speed_grade;
+	__le16 sync_ddr_speed_grade;
+	u8 async_sdr_features;
+	u8 toggle_ddr_features;
+	u8 sync_ddr_features;
+	__le16 t_prog;
+	__le16 t_bers;
+	__le16 t_r;
+	__le16 t_r_multi_plane;
+	__le16 t_ccs;
+	__le16 io_pin_capacitance_typ;
+	__le16 input_pin_capacitance_typ;
+	__le16 clk_pin_capacitance_typ;
+	u8 driver_strength_support;
+	__le16 t_ald;
+	u8 reserved4[36];
+
+	/* ECC and endurance block */
+	u8 guaranteed_good_blocks;
+	__le16 guaranteed_block_endurance;
+	struct jedec_ecc_info ecc_info[4];
+	u8 reserved5[29];
+
+	/* reserved */
+	u8 reserved6[148];
+
+	/* vendor */
+	__le16 vendor_rev_num;
+	u8 reserved7[88];
+
+	/* CRC for Parameter Page */
+	__le16 crc;
+} __packed;
+
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
@@ -455,7 +533,7 @@ struct nand_ecc_ctrl {
 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offs, uint32_t len, uint8_t *buf);
+			uint32_t offs, uint32_t len, uint8_t *buf, int page);
 	int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offset, uint32_t data_len,
 			const uint8_t *data_buf, int oob_required);
@@ -472,17 +550,17 @@ struct nand_ecc_ctrl {
 
 /**
  * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ECC
- * @ecccode:	buffer for ECC read from flash
- * @databuf:	buffer for data - dynamically sized
+ * @ecccalc:	buffer pointer for calculated ECC, size is oobsize.
+ * @ecccode:	buffer pointer for ECC read from flash, size is oobsize.
+ * @databuf:	buffer pointer for data, size is (page size + oobsize).
  *
  * Do not change the order of buffers. databuf and oobrbuf must be in
  * consecutive order.
  */
 struct nand_buffers {
 #ifndef __UBOOT__
-	uint8_t	*ecccalc;
-	uint8_t	*ecccode;
+	uint8_t *ecccalc;
+	uint8_t *ecccode;
 	uint8_t *databuf;
 #else
 	uint8_t	ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
@@ -567,8 +645,12 @@ struct nand_buffers {
  * @subpagesize:	[INTERN] holds the subpagesize
  * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
  *			non 0 if ONFI supported.
+ * @jedec_version:	[INTERN] holds the chip JEDEC version (BCD encoded),
+ *			non 0 if JEDEC supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
+ * @jedec_params:	[INTERN] holds the JEDEC parameter page when JEDEC is
+ *			supported, 0 otherwise.
  * @read_retries:	[INTERN] the number of read retry modes supported
  * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
  * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
@@ -646,10 +728,12 @@ struct nand_chip {
 	int badblockbits;
 
 	int onfi_version;
+	int jedec_version;
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 	struct nand_onfi_params	onfi_params;
 #endif
-
+	struct nand_jedec_params jedec_params;
+ 
 	int read_retries;
 
 	flstate_t state;
@@ -923,6 +1007,13 @@ static inline int nand_opcode_8bits(unsigned int command)
 	return 0;
 }
 
+/* return the supported JEDEC features. */
+static inline int jedec_feature(struct nand_chip *chip)
+{
+	return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
+		: 0;
+}
+
 #ifdef __UBOOT__
 /* Standard NAND functions from nand_base.c */
 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);

include/mtd/ubi-user.h

@@ -122,6 +122,16 @@
  * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
  * passed. The object describes which property should be set, and to which value
  * it should be set.
+ *
+ * Block devices on UBI volumes
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To create a R/O block device on top of an UBI volume the %UBI_IOCVOLCRBLK
+ * should be used. A pointer to a &struct ubi_blkcreate_req object is expected
+ * to be passed, which is not used and reserved for future usage.
+ *
+ * Conversely, to remove a block device the %UBI_IOCVOLRMBLK should be used,
+ * which takes no arguments.
  */
 
 /*
@@ -179,6 +189,10 @@
 /* Set an UBI volume property */
 #define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
 			       struct ubi_set_vol_prop_req)
+/* Create a R/O block device on top of an UBI volume */
+#define UBI_IOCVOLCRBLK _IOW(UBI_VOL_IOC_MAGIC, 7, struct ubi_blkcreate_req)
+/* Remove the R/O block device */
+#define UBI_IOCVOLRMBLK _IO(UBI_VOL_IOC_MAGIC, 8)
 
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
@@ -408,4 +422,12 @@ struct ubi_set_vol_prop_req {
 	__u64 value;
 }  __packed;
 
+/**
+ * struct ubi_blkcreate_req - a data structure used in block creation requests.
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_blkcreate_req {
+	__s8  padding[128];
+}  __packed;
+
 #endif /* __UBI_USER_H__ */