Initial revision

include/cmd_boot.h

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Boot support
+ */
+#ifndef	_CMD_BOOT_H
+#define	_CMD_BOOT_H
+
+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
+#define	CMD_TBL_BDINFO	MK_CMD_TBL_ENTRY(					\
+	"bdinfo",	2,	1,	1,	do_bdinfo,			\
+	"bdinfo  - print Board Info structure\n",				\
+	NULL									\
+),
+int do_bdinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#else
+#define CMD_TBL_BDINFO
+#endif
+
+
+#define CMD_TBL_GO	MK_CMD_TBL_ENTRY(					\
+	"go",		2,	CFG_MAXARGS,	1,	do_go,			\
+	"go      - start application at address 'addr'\n",			\
+	"addr [arg ...]\n    - start application at address 'addr'\n"		\
+	"      passing 'arg' as arguments\n"					\
+),
+int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+#ifdef	CFG_LOADS_BAUD_CHANGE
+#define	CMD_TBL_LOADS	MK_CMD_TBL_ENTRY(					\
+	"loads",	5,	3,	0,	do_load_serial,			\
+	"loads   - load S-Record file over serial line\n",			\
+	"[ off ] [ baud ]\n"							\
+	"    - load S-Record file over serial line"				\
+	" with offset 'off' and baudrate 'baud'\n"				\
+),
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#define	CMD_TBL_LOADS	MK_CMD_TBL_ENTRY(					\
+	"loads",	5,	2,	0,	do_load_serial,			\
+	"loads   - load S-Record file over serial line\n",			\
+	"[ off ]\n"								\
+	"    - load S-Record file over serial line with offset 'off'\n"		\
+),
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/*
+ * SAVES always requires LOADS support, but not vice versa
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+#ifdef	CFG_LOADS_BAUD_CHANGE
+#define	CMD_TBL_SAVES	MK_CMD_TBL_ENTRY(					\
+	"saves",	5,	4,	0,	do_save_serial,			\
+	"saves   - save S-Record file over serial line\n",			\
+	"[ off ] [size] [ baud ]\n"							\
+	"    - save S-Record file over serial line"				\
+	" with offset 'off', size 'size' and baudrate 'baud'\n"				\
+),
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#define	CMD_TBL_SAVES	MK_CMD_TBL_ENTRY(					\
+	"saves",	5,	3,	0,	do_save_serial,			\
+	"saves   - save S-Record file over serial line\n",			\
+	"[ off ] [size]\n"								\
+	"    - save S-Record file over serial line with offset 'off' and size 'size'\n"		\
+),
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#else	/* ! CFG_CMD_SAVES */
+#define CMD_TBL_SAVES
+#endif	/* CFG_CMD_SAVES */
+
+#else	/* ! CFG_CMD_LOADS */
+#define CMD_TBL_LOADS
+#define CMD_TBL_SAVES
+#endif	/* CFG_CMD_LOADS */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADB)
+#define	CMD_TBL_LOADB	MK_CMD_TBL_ENTRY(					\
+	"loadb",	5,	3,	0,	do_load_serial_bin,		\
+	"loadb   - load binary file over serial line (kermit mode)\n",		\
+	"[ off ] [ baud ]\n"							\
+	"    - load binary file over serial line"				\
+	" with offset 'off' and baudrate 'baud'\n"				\
+),
+int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#else
+#define CMD_TBL_LOADB
+#endif	/* CFG_CMD_LOADB */
+
+#define CMD_TBL_RESET	MK_CMD_TBL_ENTRY(					\
+	"reset",	5,	1,	0,	do_reset,			\
+	"reset   - Perform RESET of the CPU\n",					\
+	NULL									\
+),
+
+/* Implemented in $(CPU)/cpu.c */
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
+#define	CMD_TBL_HWFLOW	MK_CMD_TBL_ENTRY(					\
+	"hwflow [on|off]",	2,	2,	0,	do_hwflow,			\
+    "hwflow  - turn the harwdare flow control on/off\n", \
+	"\n - change RTS/CTS hardware flow control over serial line\n" \
+),
+
+int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#else
+#define CMD_TBL_HWFLOW
+#endif
+#endif	/* _CMD_BOOT_H */