Add gettime command

Gettime returns the current timer value.  If CONFIG_SYS_HZ is defined
then the timer value is also converted to seconds.

Tegra20 (SeaBoard) # gettime
Timer val: 7754
Seconds : 7
Remainder : 754
sys_hz = 1000

There has been some discussion about whether this is useful enough to
be included in U-Boot. The following boards do not have CONFIG_SYS_HZ
defined:

M52277EVB
M52277EVB_stmicro
M53017EVB
M54418TWR
M54418TWR_nand_mii
M54418TWR_nand_rmii
M54418TWR_nand_rmii_lowfreq
M54418TWR_serial_mii
M54418TWR_serial_rmii

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

README

@@ -824,6 +824,7 @@ The following options need to be configured:
 		CONFIG_CMD_FDOS		* Dos diskette Support
 		CONFIG_CMD_FLASH	  flinfo, erase, protect
 		CONFIG_CMD_FPGA		  FPGA device initialization support
+		CONFIG_CMD_GETTIME	* Get time since boot
 		CONFIG_CMD_GO		* the 'go' command (exec code)
 		CONFIG_CMD_GREPENV	* search environment
 		CONFIG_CMD_HWFLOW	* RTS/CTS hw flow control

common/Makefile

@@ -100,6 +100,7 @@ ifdef CONFIG_FPGA
 COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
 endif
 COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
+COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o
 COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
 COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
 COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o

common/cmd_gettime.c

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Get Timer overflows after 2^32 / CONFIG_SYS_HZ (32Khz) = 131072 sec
+ */
+#include <common.h>
+#include <command.h>
+
+static int do_gettime(cmd_tbl_t *cmdtp, int flag, int argc,
+		      char * const argv[])
+{
+	unsigned long int val = get_timer(0);
+
+#ifdef CONFIG_SYS_HZ
+	printf("Timer val: %lu\n", val);
+	printf("Seconds : %lu\n", val / CONFIG_SYS_HZ);
+	printf("Remainder : %lu\n", val % CONFIG_SYS_HZ);
+	printf("sys_hz = %lu\n", (unsigned long int)CONFIG_SYS_HZ);
+#else
+	printf("CONFIG_SYS_HZ not defined");
+	printf("Timer Val %lu", val);
+#endif
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	gettime,	1,	1,	do_gettime,
+	"get timer val elapsed,\n",
+	"get time elapsed from uboot start\n"
+);

include/config_cmd_all.h

@@ -40,6 +40,7 @@
 #define CONFIG_CMD_FDOS		/* Floppy DOS support		*/
 #define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
 #define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#define CONFIG_CMD_GETTIME	/* Get time since boot         */
 #define CONFIG_CMD_HWFLOW	/* RTS/CTS hw flow control	*/
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
 #define CONFIG_CMD_IDE		/* IDE harddisk support		*/