ARM: uniphier: remove kernel parameter settings from environment

Currently, console=ttyS0 is hard-coded in CONFIG_EXTRA_ENV_SETTINGS
and it replaces the bootargs in the chosen node of the device tree
passed to the kernel.  This is not preferable because I am going to
add some boards whose console is not ttyS0.

Drop bootargs settings from U-Boot's environment and use the one in
device tree by default.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
master
Masahiro Yamada 9 years ago
parent e6eecca54f
commit 5451b777de
  1. 22
      include/configs/uniphier.h

@ -224,22 +224,17 @@
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
"tftpboot; bootm;"
#define CONFIG_BOOTARGS " earlyprintk loglevel=8"
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define LINUXBOOT_ENV_SETTINGS \
"fit_addr=0x00100000\0" \
"fit_addr_r=0x84100000\0" \
"fit_size=0x00f00000\0" \
"norboot=run add_default_bootargs &&" \
"setexpr fit_addr $nor_base + $fit_addr &&" \
"norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
"bootm $fit_addr\0" \
"nandboot=run add_default_bootargs &&" \
"nand read $fit_addr_r $fit_addr $fit_size &&" \
"nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
"bootm $fit_addr_r\0" \
"tftpboot=run add_default_bootargs &&" \
"tftpboot $fit_addr_r $bootfile &&" \
"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
"bootm $fit_addr_r\0"
#else
#define CONFIG_BOOTFILE "uImage"
@ -255,18 +250,15 @@
"ramdisk_addr_r=0x84a00000\0" \
"ramdisk_size=0x00600000\0" \
"ramdisk_file=rootfs.cpio.uboot\0" \
"norboot=run add_default_bootargs &&" \
"setexpr kernel_addr $nor_base + $kernel_addr &&" \
"norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
"setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
"setexpr fdt_addr $nor_base + $fdt_addr &&" \
"bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
"nandboot=run add_default_bootargs &&" \
"nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"tftpboot=run add_default_bootargs &&" \
"tftpboot $kernel_addr_r $bootfile &&" \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"tftpboot $fdt_addr_r $fdt_file &&" \
"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
@ -281,8 +273,6 @@
"nand write $loadaddr 0 0x00010000 &&" \
"tftpboot u-boot-dtb.img &&" \
"nand write $loadaddr 0x00010000 0x000f0000\0" \
"add_default_bootargs=setenv bootargs $bootargs" \
" console=ttyS0,$baudrate\0" \
LINUXBOOT_ENV_SETTINGS
/* Open Firmware flat tree */

Loading…
Cancel
Save