mmc: move CONFIG_GENERIC_MMC to Kconfig

Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC. Let's create an entry for "config GENERIC_MMC" with "default MMC", then convert all macro defines in headers to Kconfig. Almost all of the defines will go away. I see only two exceptions: configs/blanche_defconfig configs/sandbox_noblk_defconfig They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something might be wrong with these two boards, so should be checked later. Anyway, this is the output of the moveconfig tool. This commit was created as follows: [1] create a config entry in drivers/mmc/Kconfig [2] tools/moveconfig.py -r HEAD GENERIC_MMC [3] manual clean-up of garbage comments in doc/README.* and include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
8 years ago · 54925327fa
parent 794c6e2c96
commit 54925327fa
189 changed files with 7 additions and 341 deletions
--- a/3
+++ b/3
@ -1457,9 +1457,6 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF

-		CONFIG_GENERIC_MMC
-		Enable the generic MMC driver
-
 		CONFIG_SUPPORT_EMMC_BOOT
 		Enable some additional features of the eMMC boot partitions.

--- a/configs/blanche_defconfig
+++ b/configs/blanche_defconfig
@ -2,7 +2,6 @@ CONFIG_ARM=y
 CONFIG_ARCH_RMOBILE=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_BLANCHE=y
-# CONFIG_MMC is not set
 CONFIG_BOOTSTAGE_USER_COUNT=0x20
 CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
@ -19,6 +18,8 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+# CONFIG_MMC is not set
+CONFIG_GENERIC_MMC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
--- a/configs/sandbox_noblk_defconfig
+++ b/configs/sandbox_noblk_defconfig
@ -100,6 +100,7 @@ CONFIG_CROS_EC_SPI=y
 CONFIG_PWRSEQ=y
 CONFIG_SPL_PWRSEQ=y
 # CONFIG_MMC is not set
+CONFIG_GENERIC_MMC=y
 CONFIG_SPI_FLASH_SANDBOX=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
--- a/doc/README.atmel_mci
+++ b/doc/README.atmel_mci
@ -69,8 +69,6 @@ int board_mmc_getcd(struct mmc *mmc)
 and the board definition files needs:

 /* SD/MMC card */
-#define CONFIG_MMC			1
-#define CONFIG_GENERIC_MMC		1
 #define CONFIG_GENERIC_ATMEL_MCI	1
 #define CONFIG_ATMEL_MCI_PORTB		1	/* Atmel XE-EK uses port B */
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIN_PC9
--- a/doc/README.socfpga
+++ b/doc/README.socfpga
@ -14,8 +14,5 @@ socfpga_dw_mmc
 Here are macro and detailed configuration required to enable DesignWare SDMMC
 controller support within SOCFPGA

-#define CONFIG_GENERIC_MMC
-> Enable the generic MMC driver
-
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256
 -> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@ -10,6 +10,10 @@ config MMC
 	  If you want MMC/SD/SDIO support, you should say Y here and
 	  also to your specific host controller driver.

+config GENERIC_MMC
+	bool "Generic MMC driver framework"
+	default MMC
+
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
 	depends on DM
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@ -478,7 +478,6 @@ combinations. this should be removed later

 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif

--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@ -25,8 +25,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
-
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@ -485,7 +485,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@ -497,7 +497,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@ -603,7 +603,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@ -463,7 +463,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@ -669,7 +669,6 @@ extern unsigned long get_sdram_size(void);

 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif

--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@ -504,7 +504,6 @@

 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif

--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@ -606,7 +606,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
 #endif

 /* Hash command with SHA acceleration supported in hardware */
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@ -654,7 +654,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /* Qman/Bman */
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@ -658,7 +658,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /* Qman/Bman */
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@ -542,7 +542,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif

--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@ -652,7 +652,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
 #endif

 /* Qman/Bman */
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@ -721,7 +721,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif

--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@ -670,7 +670,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@ -519,7 +519,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK \
 	(!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@ -699,7 +699,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif

--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@ -473,7 +473,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_MMC_SPI
 #define CONFIG_CMD_MMC_SPI
-#define CONFIG_GENERIC_MMC
 #endif

 /* Misc Extra Settings */
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@ -100,7 +100,6 @@
 /*
 * SD (MMC) controller
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FTSDC010
 #define CONFIG_FTSDC010_NUMBER		1
 #define CONFIG_FTSDC010_SDIO
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@ -52,7 +52,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER

 /* USB Configs */
--- a/include/configs/alt.h
+++ b/include/configs/alt.h
@ -87,8 +87,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2

 /* MMCIF */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SH_MMCIF
 #define CONFIG_SH_MMCIF_ADDR		0xee200000
 #define CONFIG_SH_MMCIF_CLK		48000000
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@ -75,7 +75,6 @@
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
-#define CONFIG_GENERIC_MMC		1

 /*
 * USB configuration
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@ -76,9 +76,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /*
 * USB configuration
 * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@ -67,7 +67,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	3

 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_FAT_WRITE

--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@ -25,9 +25,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC support */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@ -307,7 +307,6 @@
 * SD/MMC
 */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
 #endif

--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@ -145,7 +145,6 @@

 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@ -103,7 +103,6 @@

 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@ -98,7 +98,6 @@
 /* MMC */

 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@ -122,7 +122,6 @@

 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@ -105,7 +105,6 @@
 /* MMC */

 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@ -110,7 +110,6 @@

 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@ -85,7 +85,6 @@
 #define CONFIG_SYS_NR_PIOS			5
 #define CONFIG_SYS_HSDRAMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
 #define CONFIG_ATMEL_SPI

 #define CONFIG_SYS_DCACHE_LINESZ		32
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@ -104,7 +104,6 @@
 #define CONFIG_SYS_NR_PIOS		5
 #define CONFIG_SYS_HSDRAMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
 #define CONFIG_ATMEL_SPI

 #define CONFIG_SYS_DCACHE_LINESZ	32
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@ -106,7 +106,6 @@
 #define CONFIG_SYS_NR_PIOS			5
 #define CONFIG_SYS_HSDRAMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC

 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
--- a/include/configs/axs10x.h
+++ b/include/configs/axs10x.h
@ -82,11 +82,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	64

 /*
- * SD/MMC configuration
- */
-#define CONFIG_GENERIC_MMC
-
-/*
 * Ethernet PHY configuration
 */
 #define CONFIG_MII
--- a/include/configs/bayleybay.h
+++ b/include/configs/bayleybay.h
@ -23,8 +23,6 @@
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}

-#define CONFIG_GENERIC_MMC
-
 /* Environment configuration */
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_ENV_OFFSET		0x006ff000
--- a/include/configs/bcm23550_w1d.h
+++ b/include/configs/bcm23550_w1d.h
@ -31,8 +31,6 @@
 #define CONFIG_KONA_GPIO

 /* MMC/SD Driver */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@ -30,8 +30,6 @@
 #define CONFIG_KONA_GPIO

 /* MMC/SD Driver */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@ -26,9 +26,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
--- a/include/configs/bf518f-ezbrd.h
+++ b/include/configs/bf518f-ezbrd.h
@ -128,7 +128,6 @@
 * SDH Settings
 */
 #if !defined(__ADSPBF512__)
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BFIN_SDH
 #endif

--- a/include/configs/bf527-ad7160-eval.h
+++ b/include/configs/bf527-ad7160-eval.h
@ -115,7 +115,6 @@
 /*
 * SPI_MMC Settings
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC_SPI

 /*
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@ -124,9 +124,6 @@
 * SPI_MMC Settings
 */
 #define CONFIG_MMC_SPI
-#ifdef CONFIG_MMC_SPI
-#define CONFIG_GENERIC_MMC
-#endif

 /*
 * NAND Settings
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@ -142,7 +142,6 @@
 * SDH Settings
 */
 #if !defined(__ADSPBF544__)
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BFIN_SDH
 #endif

--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@ -126,7 +126,6 @@
 /*
 * SDH Settings
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BFIN_SDH

 /*
--- a/include/configs/blanche.h
+++ b/include/configs/blanche.h
@ -95,8 +95,6 @@
 /* USB */
 #undef CONFIG_CMD_USB

-#define CONFIG_GENERIC_MMC
-
 /* Module stop status bits */
 /* INTC-RT */
 #define CONFIG_SMSTP0_ENA	0x00400000
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@ -48,7 +48,6 @@

 /* MMC/SD IP block */
 #if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_GENERIC_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
 #endif /* CONFIG_EMMC_BOOT */

--- a/include/configs/brxre1.h
+++ b/include/configs/brxre1.h
@ -43,7 +43,6 @@
 /* GPIO */

 /* MMC/SD IP block */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT

 /* Always 64 KiB env size */
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@ -30,9 +30,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
--- a/include/configs/cei-tk1-som.h
+++ b/include/configs/cei-tk1-som.h
@ -29,9 +29,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@ -43,7 +43,6 @@
 /*
 * SDIO/MMC Card Configuration
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

 /* Partition support */
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@ -118,7 +118,6 @@
 /*
 * SPI_MMC Settings
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC_SPI

 /*
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@ -116,7 +116,6 @@
 /*
 * SPI_MMC Settings
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC_SPI

 /*
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@ -80,8 +80,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}

-#define CONFIG_GENERIC_MMC
-
 /* USB */
 #define CONFIG_USB_OMAP3
 #define CONFIG_USB_EHCI
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@ -87,8 +87,6 @@

 #define CONFIG_OMAP_GPIO

-#define CONFIG_GENERIC_MMC
-
 /* USB */
 #define CONFIG_USB_MUSB_AM35X

--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@ -65,7 +65,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	2

 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_FAT_WRITE

--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@ -24,9 +24,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC support */
-#define CONFIG_GENERIC_MMC
-
 /* USB host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@ -25,9 +25,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC support */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@ -57,8 +57,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1

-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
--- a/include/configs/conga-qeval20-qa3-e3845.h
+++ b/include/configs/conga-qeval20-qa3-e3845.h
@ -23,8 +23,6 @@
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}

-#define CONFIG_GENERIC_MMC
-
 #undef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1

--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@ -206,8 +206,6 @@
 /*
 * MMC
 */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR

--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@ -620,7 +620,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
 #endif

 /* Hash command with SHA acceleration supported in hardware */
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@ -24,8 +24,6 @@
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}

-#define CONFIG_GENERIC_MMC
-
 /* Environment configuration */
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_ENV_OFFSET		0
--- a/include/configs/cyrus.h
+++ b/include/configs/cyrus.h
@ -442,7 +442,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
 #endif

 /*
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@ -310,11 +310,6 @@
 #undef CONFIG_CMD_ENV
 #endif

-/* SD/MMC configuration */
-#ifndef CONFIG_USE_NOR
-#define CONFIG_GENERIC_MMC
-#endif
-
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@ -23,9 +23,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@ -43,7 +43,6 @@
 /*
 * SDIO/MMC Card Configuration
 */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

 /*
--- a/include/configs/dfi-bt700.h
+++ b/include/configs/dfi-bt700.h
@ -28,8 +28,6 @@
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}

-#define CONFIG_GENERIC_MMC
-
 #undef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1

--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@ -31,9 +31,6 @@
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		19000000

-/* This are needed to have proper mmc support */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"

 /* Fixup - in init code we switch from device to host mode,
--- a/include/configs/e2220-1170.h
+++ b/include/configs/e2220-1170.h
@ -21,9 +21,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@ -126,7 +126,6 @@

 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIO_PORTC, 8
 #endif
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@ -37,7 +37,6 @@
 #define CONFIG_BAUDRATE			115200

 /* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER

 /* PWM */
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@ -26,9 +26,6 @@
 #undef CONFIG_SCSI_AHCI
 #undef CONFIG_SCSI

-/* SD/MMC support */
-#define CONFIG_GENERIC_MMC
-
 /* 10/100M Ethernet support */
 #define CONFIG_DESIGNWARE_ETH
 #define CONFIG_DW_ALTDESCRIPTOR
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@ -64,7 +64,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER

 /* USB Configs */
--- a/include/configs/gose.h
+++ b/include/configs/gose.h
@ -94,7 +94,6 @@
 #define CONFIG_SMSTP7_ENA	0x00200000

 /* SDHI */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SH_SDHI_FREQ		97500000

 #endif	/* __GOSE_H */
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@ -26,9 +26,6 @@

 #define CONFIG_MACH_TYPE		MACH_TYPE_HARMONY

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@ -69,7 +69,6 @@
 #define CONFIG_HIKEY_GPIO

 /* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER

 #define CONFIG_FS_EXT4
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@ -26,8 +26,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR

-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_CMD_FPGAD
 #define CONFIG_CMD_IOLOOP

--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@ -135,11 +135,6 @@
 #define CONFIG_MXC_NAND_HWECC

 /*
- * SD/MMC
- */
-#define CONFIG_GENERIC_MMC
-
-/*
 * GPIO
 */
 #define CONFIG_MXC_GPIO
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@ -25,9 +25,6 @@
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA

-/* SD/MMC */
-#define CONFIG_GENERIC_MMC
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@ -60,9 +60,6 @@
 #define CONFIG_PHY_MICREL
 #define PHY_ANEG_TIMEOUT	10000 /* PHY needs longer aneg time */

-/* MMC/SD */
-#define CONFIG_GENERIC_MMC
-
 #undef CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_IS_IN_FAT
 #define FAT_ENV_INTERFACE		"mmc"
--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@ -85,12 +85,6 @@
 #define CONFIG_SYS_NO_FLASH

 /*
- * MMC
- */
-
-#define CONFIG_GENERIC_MMC
-
-/*
 * Power
 */

--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@ -94,7 +94,6 @@
 #define CONFIG_SMSTP7_ENA	0x00200000

 /* SD */
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SH_SDHI_FREQ	97500000

 #endif	/* __KOELSCH_H */
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@ -86,8 +86,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	3

 /* MMC */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SH_MMCIF
 #define CONFIG_SH_MMCIF_ADDR		0xEE220000
 #define CONFIG_SH_MMCIF_CLK		97500000
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@ -213,9 +213,6 @@
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE		(16 << 10)

-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000

--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@ -134,7 +134,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /* SATA */
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@ -47,7 +47,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /* SATA */
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@ -156,7 +156,6 @@
 */
 #define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC

 /* SATA */
 #define CONFIG_CMD_SCSI
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@ -393,7 +393,6 @@ unsigned long get_board_ddr_clk(void);
 * MMC
 */
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC

 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@ -294,7 +294,6 @@
 * MMC
 */
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC

 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@ -130,7 +130,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /*  DSPI  */
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@ -116,7 +116,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
--- a/include/configs/ls2080a_simu.h
+++ b/include/configs/ls2080a_simu.h
@ -136,7 +136,6 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /* Debug Server firmware */
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@ -353,7 +353,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
 #endif

 /* Initial environment variables */
--- a/Show More
+++ b/Show More