Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

exynos: Drop old exynos5250-specific board code

Browse Source 
Now that most exynos5250 boards can use the generic exynos5 code, switch
over to it and remove the old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
master
Simon Glass 10 years ago
parent c51212332a
commit 54abb000e3
3 changed files with 2 additions and 310 deletions
  1. 4
      board/samsung/smdk5250/Makefile
  2. 306
      board/samsung/smdk5250/exynos5-dt.c
  3. 2
      include/configs/exynos5-dt-common.h

4
board/samsung/smdk5250/Makefile
Unescape View File

@ -5,7 +5,3 @@
#
obj-y += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
obj-y += exynos5-dt.o
endif

306
board/samsung/smdk5250/exynos5-dt.c
Unescape View File

@ -1,306 +0,0 @@
/*
* Copyright (C) 2012 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <errno.h>
#include <i2c.h>
#include <netdev.h>
#include <spi.h>
#include <asm/gpio.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
#include <power/tps65090_pmic.h>
#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
/* Enable MAX98095 Codec */
gpio_request(EXYNOS5_GPIO_X17, "max98095_enable");
gpio_direction_output(EXYNOS5_GPIO_X17, 1);
gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
}
#endif
int exynos_init(void)
{
#ifdef CONFIG_SOUND_MAX98095
board_enable_audio_codec();
#endif
return 0;
}
#if defined(CONFIG_POWER)
#ifdef CONFIG_POWER_MAX77686
static int pmic_reg_update(struct pmic *p, int reg, uint regval)
{
u32 val;
int ret = 0;
ret = pmic_reg_read(p, reg, &val);
if (ret) {
debug("%s: PMIC %d register read failed\n", __func__, reg);
return -1;
}
val |= regval;
ret = pmic_reg_write(p, reg, val);
if (ret) {
debug("%s: PMIC %d register write failed\n", __func__, reg);
return -1;
}
return 0;
}
static int max77686_init(void)
{
struct pmic *p;
if (pmic_init(I2C_PMIC))
return -1;
p = pmic_get("MAX77686_PMIC");
if (!p)
return -ENODEV;
if (pmic_probe(p))
return -1;
if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
return -1;
if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
return -1;
/* VDD_MIF */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
MAX77686_BUCK1OUT_1V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK1OUT);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
MAX77686_BUCK1CTRL_EN))
return -1;
/* VDD_ARM */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
MAX77686_BUCK2DVS1_1_3V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK2DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
MAX77686_BUCK2CTRL_ON))
return -1;
/* VDD_INT */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
MAX77686_BUCK3DVS1_1_0125V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK3DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
MAX77686_BUCK3CTRL_ON))
return -1;
/* VDD_G3D */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
MAX77686_BUCK4DVS1_1_2V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK4DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
MAX77686_BUCK3CTRL_ON))
return -1;
/* VDD_LDO2 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
MAX77686_LD02CTRL1_1_5V | EN_LDO))
return -1;
/* VDD_LDO3 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
MAX77686_LD03CTRL1_1_8V | EN_LDO))
return -1;
/* VDD_LDO5 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
MAX77686_LD05CTRL1_1_8V | EN_LDO))
return -1;
/* VDD_LDO10 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
MAX77686_LD10CTRL1_1_8V | EN_LDO))
return -1;
return 0;
}
#endif /* CONFIG_POWER_MAX77686 */
int exynos_power_init(void)
{
int ret = 0;
#ifdef CONFIG_POWER_MAX77686
ret = max77686_init();
if (ret)
return ret;
#endif
#ifdef CONFIG_POWER_TPS65090
/*
* The TPS65090 may not be in the device tree. If so, it is not
* an error.
*/
ret = tps65090_init();
if (ret == 0 || ret == -ENODEV)
return 0;
#endif
return ret;
}
#endif /* CONFIG_POWER */
#ifdef CONFIG_LCD
static int board_dp_bridge_setup(void)
{
const int max_tries = 10;
int num_tries, node;
/*
* TODO(sjg): Use device tree for GPIOs when exynos GPIO
* numbering patch is in mainline.
*/
debug("%s\n", __func__);
node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NXP_PTN3460);
if (node < 0) {
debug("%s: No node for DP bridge in device tree\n", __func__);
return -ENODEV;
}
/* Setup the GPIOs */
/* PD is ACTIVE_LOW, and initially de-asserted */
gpio_request(EXYNOS5_GPIO_Y25, "dp_bridge_pd");
gpio_set_pull(EXYNOS5_GPIO_Y25, S5P_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS5_GPIO_Y25, 1);
/* Reset is ACTIVE_LOW */
gpio_request(EXYNOS5_GPIO_X15, "dp_bridge_reset");
gpio_set_pull(EXYNOS5_GPIO_X15, S5P_GPIO_PULL_NONE);
gpio_direction_output(EXYNOS5_GPIO_X15, 0);
udelay(10);
gpio_set_value(EXYNOS5_GPIO_X15, 1);
gpio_request(EXYNOS5_GPIO_X07, "dp_bridge_hpd");
gpio_direction_input(EXYNOS5_GPIO_X07);
/*
* We need to wait for 90ms after bringing up the bridge since there
* is a phantom "high" on the HPD chip during its bootup. The phantom
* high comes within 7ms of de-asserting PD and persists for at least
* 15ms. The real high comes roughly 50ms after PD is de-asserted. The
* phantom high makes it hard for us to know when the NXP chip is up.
*/
mdelay(90);
for (num_tries = 0; num_tries < max_tries; num_tries++) {
/* Check HPD. If it's high, we're all good. */
if (gpio_get_value(EXYNOS5_GPIO_X07))
return 0;
debug("%s: eDP bridge failed to come up; try %d of %d\n",
__func__, num_tries, max_tries);
}
/* Immediately go into bridge reset if the hp line is not high */
return -ENODEV;
}
void exynos_cfg_lcd_gpio(void)
{
/* For Backlight */
gpio_request(EXYNOS5_GPIO_B20, "lcd_backlight");
gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
gpio_set_value(EXYNOS5_GPIO_B20, 1);
/* LCD power on */
gpio_request(EXYNOS5_GPIO_X15, "lcd_power");
gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
gpio_set_value(EXYNOS5_GPIO_X15, 1);
/* Set Hotplug detect for DP */
gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
{
set_dp_phy_ctrl(onoff);
}
void exynos_backlight_on(unsigned int on)
{
debug("%s(%u)\n", __func__, on);
if (!on)
return;
#ifdef CONFIG_POWER_TPS65090
int ret;
ret = tps65090_fet_enable(1); /* Enable FET1, backlight */
if (ret)
return;
/* T5 in the LCD timing spec (defined as > 10ms) */
mdelay(10);
/* board_dp_backlight_pwm */
gpio_direction_output(EXYNOS5_GPIO_B20, 1);
/* T6 in the LCD timing spec (defined as > 10ms) */
mdelay(10);
/* board_dp_backlight_en */
gpio_request(EXYNOS5_GPIO_X30, "board_dp_backlight_en");
gpio_direction_output(EXYNOS5_GPIO_X30, 1);
#endif
}
void exynos_lcd_power_on(void)
{
int ret;
debug("%s\n", __func__);
#ifdef CONFIG_POWER_TPS65090
/* board_dp_lcd_vdd */
tps65090_fet_enable(6); /* Enable FET6, lcd panel */
#endif
ret = board_dp_bridge_setup();
if (ret && ret != -ENODEV)
printf("LCD bridge failed to enable: %d\n", ret);
}
#endif

2
include/configs/exynos5-dt-common.h
Unescape View File

@ -16,6 +16,8 @@
"stdout=serial,lcd\0" \
"stderr=serial,lcd\0"
#define CONFIG_EXYNOS5_DT
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BASE 0x12D30000
#define FLASH_SIZE (4 << 20)

Write Preview
Loading…
Cancel
Save