diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 132fa69..e4d118d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-topic-miami.dtb \ zynq-topic-miamilite.dtb \ zynq-topic-miamiplus.dtb \ + zynq-zturn-myir.dtb \ zynq-zc770-xm010.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ diff --git a/arch/arm/dts/zynq-zturn-myir.dts b/arch/arm/dts/zynq-zturn-myir.dts new file mode 100644 index 0000000..a5ecfcc --- /dev/null +++ b/arch/arm/dts/zynq-zturn-myir.dts @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2015 Andrea Merello + * Copyright (C) 2017 Alexander Graf + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board"; + compatible = "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + spi0 = &qspi; + mmc0 = &sdhci0; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + led_r { + label = "led_r"; + gpios = <&gpio0 0x72 0x1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led_g { + label = "led_g"; + gpios = <&gpio0 0x73 0x1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led_b { + label = "led_b"; + gpios = <&gpio0 0x74 0x1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + usr_led1 { + label = "usr_led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + linux,default-trigger = "none"; + }; + + usr_led2 { + label = "usr_led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + linux,default-trigger = "none"; + }; + }; + + gpio-beep { + compatible = "gpio-beeper"; + label = "pl-beep"; + gpios = <&gpio0 0x75 0x0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <0x1>; + #size-cells = <0x0>; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + gpio-key,wakeup; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; + fclk-enable = <0xf>; +}; + +&qspi { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&sdhci0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&uart0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&uart1 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + adxl345@53 { + compatible = "adi,adxl34x", "adxl34x"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig new file mode 100644 index 0000000..b550912 --- /dev/null +++ b/configs/zynq_z_turn_defconfig @@ -0,0 +1,59 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQ=y +CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_DEFAULT_DEVICE_TREE="zynq-zturn-myir" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_ENV_IS_NOWHERE=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL=y +CONFIG_SPL_OS_BOOT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Zynq> " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_ZYNQ_GEM=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xe0001000 +CONFIG_DEBUG_UART_CLOCK=50000000 +CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Xilinx" +CONFIG_G_DNL_VENDOR_NUM=0x03FD +CONFIG_G_DNL_PRODUCT_NUM=0x0300