Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

rtc: remove CONFIG_CMD_DATE dependency

Browse Source 
The EFI subsystem accesses the real time clock and is enabled by default.
So we should drop any CONFIG_CMD_DATE dependency from the real time clock
drivers.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
lime2-spi
Heinrich Schuchardt 7 years ago committed by Alexander Graf
parent 62045b0eb4
commit 5d88902401
24 changed files with 0 additions and 89 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 4
      drivers/rtc/at91sam9_rtt.c
  2. 2
      drivers/rtc/davinci.c
  3. 4
      drivers/rtc/ds1302.c
  4. 4
      drivers/rtc/ds1306.c
  5. 4
      drivers/rtc/ds1307.c
  6. 4
      drivers/rtc/ds1337.c
  7. 3
      drivers/rtc/ds1374.c
  8. 4
      drivers/rtc/ds164x.c
  9. 4
      drivers/rtc/ds174x.c
  10. 4
      drivers/rtc/ds3231.c
  11. 4
      drivers/rtc/imxdi.c
  12. 3
      drivers/rtc/m41t11.c
  13. 3
      drivers/rtc/m41t60.c
  14. 4
      drivers/rtc/m41t62.c
  15. 4
      drivers/rtc/m48t35ax.c
  16. 4
      drivers/rtc/max6900.c
  17. 3
      drivers/rtc/mc146818.c
  18. 4
      drivers/rtc/mcfrtc.c
  19. 4
      drivers/rtc/mk48t59.c
  20. 4
      drivers/rtc/pcf8563.c
  21. 3
      drivers/rtc/rs5c372.c
  22. 4
      drivers/rtc/rx8025.c
  23. 4
      drivers/rtc/s3c24x0_rtc.c
  24. 4
      drivers/rtc/x1205.c

4
drivers/rtc/at91sam9_rtt.c
Unescape View File

@ -27,8 +27,6 @@
#include <asm/arch/at91_rtt.h>
#include <asm/arch/at91_gpbr.h>
#if defined(CONFIG_CMD_DATE)
int rtc_get (struct rtc_time *tmp)
{
at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
@ -78,5 +76,3 @@ void rtc_reset (void)
while (readl(&rtt->vr) != 0)
;
}
#endif

2
drivers/rtc/davinci.c
Unescape View File

@ -9,7 +9,6 @@
#include <asm/io.h>
#include <asm/davinci_rtc.h>
#if defined(CONFIG_CMD_DATE)
int rtc_get(struct rtc_time *tmp)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)DAVINCI_RTC_BASE;
@ -79,4 +78,3 @@ void rtc_reset(void)
/* run RTC counter */
writel(0x01, &rtc->ctrl);
}
#endif

4
drivers/rtc/ds1302.c
Unescape View File

@ -9,8 +9,6 @@
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
/* GPP Pins */
#define DATA 0x200
#define SCLK 0x400
@ -328,5 +326,3 @@ int rtc_set(struct rtc_time *tmp)
return 0;
}
#endif

4
drivers/rtc/ds1306.c
Unescape View File

@ -19,8 +19,6 @@
#include <rtc.h>
#include <spi.h>
#if defined(CONFIG_CMD_DATE)
#define RTC_SECONDS 0x00
#define RTC_MINUTES 0x01
#define RTC_HOURS 0x02
@ -437,5 +435,3 @@ static void rtc_write (unsigned char reg, unsigned char val)
}
#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
#endif

4
drivers/rtc/ds1307.c
Unescape View File

@ -51,8 +51,6 @@ enum ds_type {
#ifndef CONFIG_DM_RTC
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
@ -204,8 +202,6 @@ static void rtc_write (uchar reg, uchar val)
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif /* CONFIG_CMD_DATE*/
#endif /* !CONFIG_DM_RTC */
#ifdef CONFIG_DM_RTC

4
drivers/rtc/ds1337.c
Unescape View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* RTC register addresses
*/
@ -190,5 +188,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

3
drivers/rtc/ds1374.c
Unescape View File

@ -18,8 +18,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#define DEBUG_RTC
@ -214,4 +212,3 @@ static void rtc_write_raw (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

4
drivers/rtc/ds164x.c
Unescape View File

@ -20,8 +20,6 @@
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read(unsigned int addr );
static void rtc_write(unsigned int addr, uchar val);
@ -171,5 +169,3 @@ static void rtc_write( unsigned int addr, uchar val )
#endif
*(volatile unsigned char*)(addr) = val;
}
#endif

4
drivers/rtc/ds174x.c
Unescape View File

@ -16,8 +16,6 @@
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read( unsigned int addr );
static void rtc_write( unsigned int addr, uchar val);
@ -172,5 +170,3 @@ static void rtc_write( unsigned int addr, uchar val )
#endif
out8( addr, val );
}
#endif

4
drivers/rtc/ds3231.c
Unescape View File

@ -16,8 +16,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* RTC register addresses
*/
@ -166,5 +164,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

4
drivers/rtc/imxdi.c
Unescape View File

@ -17,8 +17,6 @@
#include <linux/compat.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
@ -222,5 +220,3 @@ void rtc_reset(void)
{
di_init();
}
#endif

3
drivers/rtc/m41t11.c
Unescape View File

@ -29,8 +29,6 @@
#endif
*/
#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
/* ------------------------------------------------------------------------- */
/*
these are simple defines for the chip local to here so they aren't too
@ -167,4 +165,3 @@ void rtc_reset (void)
val = val & 0x3F;/*turn off freq test keep calibration*/
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
}
#endif

3
drivers/rtc/m41t60.c
Unescape View File

@ -20,8 +20,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
/*
* Convert between century and "century bits" (CB1 and CB0). These routines
* assume years are in the range 1900 - 2299.
@ -237,4 +235,3 @@ void rtc_reset(void)
}
rtc_dump("end reset");
}
#endif /* CONFIG_RTC_M41T60 && CONFIG_SYS_I2C_RTC_ADDR && CONFIG_CMD_DATE */

4
drivers/rtc/m41t62.c
Unescape View File

@ -18,8 +18,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#define M41T62_REG_SSEC 0
#define M41T62_REG_SEC 1
#define M41T62_REG_MIN 2
@ -130,5 +128,3 @@ void rtc_reset(void)
val &= ~M41T80_ALHOUR_HT;
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
}
#endif

4
drivers/rtc/m48t35ax.c
Unescape View File

@ -16,8 +16,6 @@
#include <rtc.h>
#include <config.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
@ -135,5 +133,3 @@ static void rtc_write (uchar reg, uchar val)
*(unsigned char *)
((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
}
#endif

4
drivers/rtc/max6900.c
Unescape View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#ifndef CONFIG_SYS_I2C_RTC_ADDR
#define CONFIG_SYS_I2C_RTC_ADDR 0x50
#endif
@ -104,5 +102,3 @@ int rtc_set (struct rtc_time *tmp)
void rtc_reset (void)
{
}
#endif

3
drivers/rtc/mc146818.c
Unescape View File

@ -19,8 +19,6 @@
#define out8(p, v) outb(v, p)
#endif
#if defined(CONFIG_CMD_DATE)
/* Set this to 1 to clear the CMOS RAM */
#define CLEAR_CMOS 0
@ -195,7 +193,6 @@ static void mc146818_init(void)
/* Clear any pending interrupts */
mc146818_read8(RTC_CONFIG_C);
}
#endif /* CONFIG_CMD_DATE */
#ifdef CONFIG_DM_RTC

4
drivers/rtc/mcfrtc.c
Unescape View File

@ -6,8 +6,6 @@
#include <common.h>
#if defined(CONFIG_CMD_DATE)
#include <command.h>
#include <rtc.h>
#include <asm/immap.h>
@ -104,5 +102,3 @@ void rtc_reset(void)
rtc->cr |= RTC_CR_SWR;
}
#endif /* CONFIG_MCFRTC && CONFIG_CMD_DATE */

4
drivers/rtc/mk48t59.c
Unescape View File

@ -70,8 +70,6 @@ void nvram_write(short dest, const void *src, size_t count)
rtc_write(d++, *s++);
}
#if defined(CONFIG_CMD_DATE)
/* ------------------------------------------------------------------------- */
int rtc_get (struct rtc_time *tmp)
@ -175,5 +173,3 @@ void rtc_set_watchdog(short multi, short res)
wd_value = RTC_WDS | ((multi & 0x1F) << 2) | (res & 0x3);
rtc_write(RTC_WATCHDOG, wd_value);
}
#endif

4
drivers/rtc/pcf8563.c
Unescape View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
@ -117,5 +115,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

3
drivers/rtc/rs5c372.c
Unescape View File

@ -24,7 +24,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* Reads are always done starting with register 15, which requires some
* jumping-through-hoops to access the data correctly.
@ -255,5 +254,3 @@ rtc_reset (void)
if (!setup_done)
rs5c372_enable();
}
#endif

4
drivers/rtc/rx8025.c
Unescape View File

@ -13,8 +13,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
@ -190,5 +188,3 @@ static void rtc_write (uchar reg, uchar val)
printf("Error writing to RTC\n");
}
#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */

4
drivers/rtc/s3c24x0_rtc.c
Unescape View File

@ -11,8 +11,6 @@
#include <common.h>
#include <command.h>
#if (defined(CONFIG_CMD_DATE))
#include <asm/arch/s3c24x0_cpu.h>
#include <rtc.h>
@ -149,5 +147,3 @@ void rtc_reset(void)
writeb((readb(&rtc->rtccon) & ~0x06) | 0x08, &rtc->rtccon);
writeb(readb(&rtc->rtccon) & ~(0x08 | 0x01), &rtc->rtccon);
}
#endif

4
drivers/rtc/x1205.c
Unescape View File

@ -22,8 +22,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#define CCR_SEC 0
#define CCR_MIN 1
#define CCR_HOUR 2
@ -160,5 +158,3 @@ void rtc_reset(void)
* Nothing to do
*/
}
#endif

Write Preview
Loading…
Cancel
Save