TI DaVinci: Remove references to SZ_xx

This patch removes the asm/sizes.h header file from being
included in the DaVinci SOC configs.
References to SZ_xx have been replaced by appropriate
bit shifted values.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Wolfgang Denk <wd@denx.de>
master
Sandeep Paulraj 16 years ago committed by Tom Rix
parent 2d4072c06b
commit 5e4c9a10c5
  1. 9
      include/configs/davinci_dm355evm.h
  2. 9
      include/configs/davinci_dm365evm.h
  3. 5
      include/configs/davinci_dvevm.h
  4. 3
      include/configs/davinci_schmoogie.h
  5. 3
      include/configs/davinci_sffsdr.h
  6. 3
      include/configs/davinci_sonata.h

@ -19,7 +19,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/* Spectrum Digital TMS320DM355 EVM board */
#define DAVINCI_DM355EVM
@ -40,7 +39,7 @@
/* Memory Info */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_1_SIZE SZ_128M
#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
/* Serial Driver info: UART0 for console */
#define CONFIG_SYS_NS16550
@ -130,7 +129,7 @@
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
/* NYET -- #define CONFIG_BOOTDELAY 5 */
#define CONFIG_BOOTCOMMAND \
@ -146,8 +145,8 @@
#define CONFIG_NET_RETRY_COUNT 10
/* U-Boot memory configuration */
#define CONFIG_STACKSIZE SZ_256K /* regular stack */
#define CONFIG_SYS_MALLOC_LEN SZ_512K /* malloc() arena */
#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* 512 KiB */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */
#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */

@ -18,7 +18,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/* Spectrum Digital TMS320DM365 EVM board */
#define DAVINCI_DM365EVM
@ -38,7 +37,7 @@
/* Memory Info */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_1_SIZE SZ_128M
#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
/* Serial Driver info: UART0 for console */
#define CONFIG_SYS_NS16550
@ -125,7 +124,7 @@
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_NAND_DAVINCI
#define CONFIG_ENV_SIZE SZ_256K
#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x3C0000
#undef CONFIG_ENV_IS_IN_FLASH
@ -143,8 +142,8 @@
#define CONFIG_TIMESTAMP
/* U-Boot memory configuration */
#define CONFIG_STACKSIZE SZ_256K /* regular stack */
#define CONFIG_SYS_MALLOC_LEN SZ_1M /* malloc() arena */
#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */
#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */

@ -19,7 +19,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/*
* Define this to make U-Boot skip low level initialization when loaded
@ -120,7 +119,7 @@
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CONFIG_SYS_NAND_SMALLPAGE
#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT \
@ -129,7 +128,7 @@
"mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
#else
#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CONFIG_ENV_SIZE SZ_128K
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#endif
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */

@ -19,7 +19,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/*=======*/
/* Board */
@ -86,7 +85,7 @@
#define CONFIG_NAND_DAVINCI
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CONFIG_ENV_SIZE SZ_128K
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
#define CONFIG_SYS_NAND_BASE 0x02000000

@ -22,7 +22,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/* Board */
#define SFFSDR
@ -81,7 +80,7 @@
#define CONFIG_NAND_DAVINCI
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
#define CONFIG_ENV_SIZE SZ_128K
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
#define CONFIG_SYS_NAND_BASE 0x02000000

@ -19,7 +19,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/*
* Define this to make U-Boot skip low level initialization when loaded
@ -119,7 +118,7 @@
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
#define CONFIG_SYS_NAND_BASE 0x02000000

Loading…
Cancel
Save