Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

mx6: Factor out common HDMI setup code

Browse Source 
Instead of duplicating HDMI setup code for every mx6 board, factor out the common code

Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
master
Pardeep Kumar Singla 12 years ago committed by Stefano Babic
parent f8b1e86d47
commit 5ea7f0e328
8 changed files with 70 additions and 78 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 8
      arch/arm/cpu/armv7/mx6/clock.c
  2. 43
      arch/arm/cpu/armv7/mx6/soc.c
  3. 2
      arch/arm/include/asm/arch-mx6/clock.h
  4. 5
      arch/arm/include/asm/arch-mx6/mxc_hdmi.h
  5. 44
      board/boundary/nitrogen6x/nitrogen6x.c
  6. 44
      board/wandboard/wandboard.c
  7. 1
      include/configs/nitrogen6x.h
  8. 1
      include/configs/wandboard.h

8
arch/arm/cpu/armv7/mx6/clock.c
Unescape View File

@ -468,6 +468,14 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}
void enable_ipu_clock(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
int reg;
reg = readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET;
writel(reg, &mxc_ccm->CCGR3);
}
/***************************************************/
U_BOOT_CMD(

43
arch/arm/cpu/armv7/mx6/soc.c
Unescape View File

@ -32,6 +32,8 @@
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/dma.h>
#include <stdbool.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
struct scu_regs {
u32 ctrl;
@ -228,3 +230,44 @@ const struct boot_mode soc_boot_modes[] = {
void s_init(void)
{
}
#ifdef CONFIG_IMX_HDMI
void imx_enable_hdmi_phy(void)
{
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
u8 reg;
reg = readb(&hdmi->phy_conf0);
reg |= HDMI_PHY_CONF0_PDZ_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
writeb(reg, &hdmi->phy_conf0);
writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
}
void imx_setup_hdmi(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
int reg;
/* Turn on HDMI PHY clock */
reg = readl(&mxc_ccm->CCGR2);
reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK|
MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
writel(reg, &mxc_ccm->CCGR2);
writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
reg = readl(&mxc_ccm->chsccdr);
reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK|
MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK|
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
reg |= (CHSCCDR_PODF_DIVIDE_BY_3
<< MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
|(CHSCCDR_IPU_PRE_CLK_540M_PFD
<< MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
}
#endif

2
arch/arm/include/asm/arch-mx6/clock.h
Unescape View File

@ -65,5 +65,5 @@ void enable_ocotp_clk(unsigned char enable);
void enable_usboh3_clk(unsigned char enable);
int enable_sata_clock(void);
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
void enable_ipu_clock(void);
#endif /* __ASM_ARCH_CLOCK_H */

5
arch/arm/include/asm/arch-mx6/mxc_hdmi.h
Unescape View File

@ -21,6 +21,11 @@
#ifndef __MXC_HDMI_H__
#define __MXC_HDMI_H__
#ifdef CONFIG_IMX_HDMI
void imx_enable_hdmi_phy(void);
void imx_setup_hdmi(void);
#endif
/*
* Hdmi controller registers
*/

44
board/boundary/nitrogen6x/nitrogen6x.c
Unescape View File

@ -480,22 +480,9 @@ static int detect_hdmi(struct display_info_t const *dev)
return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
}
static void enable_hdmi(struct display_info_t const *dev)
static void do_enable_hdmi(struct display_info_t const *dev)
{
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
u8 reg;
printf("%s: setup HDMI monitor\n", __func__);
reg = readb(&hdmi->phy_conf0);
reg |= HDMI_PHY_CONF0_PDZ_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
writeb(reg, &hdmi->phy_conf0);
writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
imx_enable_hdmi_phy();
}
static int detect_i2c(struct display_info_t const *dev)
@ -528,7 +515,7 @@ static struct display_info_t const displays[] = {{
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = enable_hdmi,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
@ -653,25 +640,15 @@ static void setup_display(void)
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
int reg;
enable_ipu_clock();
imx_setup_hdmi();
/* Turn on LDB0,IPU,IPU DI0 clocks */
reg = __raw_readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
|MXC_CCM_CCGR3_LDB_DI0_MASK;
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
writel(reg, &mxc_ccm->CCGR3);
/* Turn on HDMI PHY clock */
reg = __raw_readl(&mxc_ccm->CCGR2);
reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
|MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
writel(reg, &mxc_ccm->CCGR2);
/* clear HDMI PHY reset */
writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
/* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
@ -689,15 +666,8 @@ static void setup_display(void)
writel(reg, &mxc_ccm->cscmr2);
reg = readl(&mxc_ccm->chsccdr);
reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
|MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
|MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
|(CHSCCDR_PODF_DIVIDE_BY_3
<<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
|(CHSCCDR_IPU_PRE_CLK_540M_PFD
<<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES

44
board/wandboard/wandboard.c
Unescape View File

@ -211,23 +211,6 @@ int board_phy_config(struct phy_device *phydev)
}
#if defined(CONFIG_VIDEO_IPUV3)
static void enable_hdmi(void)
{
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
u8 reg;
reg = readb(&hdmi->phy_conf0);
reg |= HDMI_PHY_CONF0_PDZ_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
writeb(reg, &hdmi->phy_conf0);
writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
}
static struct fb_videomode const hdmi = {
.name = "HDMI",
.refresh = 60,
@ -253,7 +236,7 @@ int board_video_skip(void)
if (ret)
printf("HDMI cannot be configured: %d\n", ret);
enable_hdmi();
imx_enable_hdmi_phy();
return ret;
}
@ -261,33 +244,14 @@ int board_video_skip(void)
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
int reg;
/* Turn on IPU clock */
reg = readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET;
writel(reg, &mxc_ccm->CCGR3);
/* Turn on HDMI PHY clock */
reg = readl(&mxc_ccm->CCGR2);
reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
| MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
writel(reg, &mxc_ccm->CCGR2);
/* clear HDMI PHY reset */
writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
enable_ipu_clock();
imx_setup_hdmi();
reg = readl(&mxc_ccm->chsccdr);
reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
| MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
| MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
| (CHSCCDR_PODF_DIVIDE_BY_3
<< MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
| (CHSCCDR_IPU_PRE_CLK_540M_PFD
<< MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
}
#endif /* CONFIG_VIDEO_IPUV3 */

1
include/configs/nitrogen6x.h
Unescape View File

@ -154,6 +154,7 @@
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

1
include/configs/wandboard.h
Unescape View File

@ -100,6 +100,7 @@
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
#if defined(CONFIG_MX6DL)
#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"

Write Preview
Loading…
Cancel
Save