serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig

LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
8 years ago · 5ed07cf53c
parent f833cd6279
commit 5ed07cf53c
14 changed files with 14 additions and 5 deletions
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y
 CONFIG_DM=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y
 CONFIG_DM=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_FSL_LPUART=y
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@ -228,6 +228,12 @@ config ALTERA_UART
 	  Select this to enable an UART for Altera devices. Please find
 	  details on the "Embedded Peripherals IP User Guide" of Altera.

+config FSL_LPUART
+	bool "Freescale LPUART support"
+	help
+	  Select this to enable a Low Power UART for Freescale VF610 and
+	  QorIQ Layerscape devices.
+
 config SYS_NS16550
 	bool "NS16550 UART or compatible"
 	help
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@ -36,7 +36,6 @@

 #define CONFIG_BOARD_EARLY_INIT_F

-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART0_BASE

 /* Allow to overwrite serial and ethaddr */
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
 * Serial Port
 */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@ -266,7 +266,6 @@
 * Serial Port
 */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@ -27,7 +27,6 @@

 #define CONFIG_BOARD_EARLY_INIT_F

-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART1_BASE

 /* Allow to overwrite serial and ethaddr */
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@ -34,7 +34,6 @@

 #define CONFIG_BOARD_EARLY_INIT_F

-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART1_BASE

 /* Allow to overwrite serial and ethaddr */