drivers/ddr/fsl: Enable detection of one DDR controller operation for LSCH3

Freescale LSCH3 platforms use two DDR controlers interleaving mode out of
reset. It can be configured to disable one controller. To support this
operation, the driver needs to detect and skip the disabled controller.

Signed-off-by: York Sun <yorksun@freescale.com>
master
York Sun 9 years ago
parent 7023100971
commit 61bd2f75f5
  1. 7
      arch/arm/include/asm/arch-fsl-layerscape/config.h
  2. 1
      drivers/ddr/fsl/main.c
  3. 40
      drivers/ddr/fsl/util.c
  4. 1
      include/fsl_ddr.h

@ -67,6 +67,13 @@
#define CCI_MN_DVM_DOMAIN_CTL 0x200
#define CCI_MN_DVM_DOMAIN_CTL_SET 0x210
#define CCI_HN_F_0_BASE (CCI_MN_BASE + 0x200000)
#define CCI_HN_F_1_BASE (CCI_MN_BASE + 0x210000)
#define CCN_HN_F_SAM_CTL 0x8 /* offset on base HN_F base */
#define CCN_HN_F_SAM_NODEID_MASK 0x7f
#define CCN_HN_F_SAM_NODEID_DDR0 0x4
#define CCN_HN_F_SAM_NODEID_DDR1 0xe
#define CCI_RN_I_0_BASE (CCI_MN_BASE + 0x800000)
#define CCI_RN_I_2_BASE (CCI_MN_BASE + 0x820000)
#define CCI_RN_I_6_BASE (CCI_MN_BASE + 0x860000)

@ -813,6 +813,7 @@ phys_size_t fsl_ddr_sdram(void)
info.board_need_mem_reset = board_need_mem_reset;
info.board_mem_reset = board_assert_mem_reset;
info.board_mem_de_reset = board_deassert_mem_reset;
remove_unused_controllers(&info);
return __fsl_ddr_sdram(&info);
}

@ -385,3 +385,43 @@ void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
}
#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */
void remove_unused_controllers(fsl_ddr_info_t *info)
{
#ifdef CONFIG_FSL_LSCH3
int i;
u64 nodeid;
void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
bool ddr0_used = false;
bool ddr1_used = false;
for (i = 0; i < 8; i++) {
nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
ddr0_used = true;
} else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
ddr1_used = true;
} else {
printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
nodeid);
}
hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
}
if (!ddr0_used && !ddr1_used) {
printf("Invalid configuration in HN-F SAM control\n");
return;
}
if (!ddr0_used && info->first_ctrl == 0) {
info->first_ctrl = 1;
info->num_ctrls = 1;
debug("First DDR controller disabled\n");
return;
}
if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
info->num_ctrls = 1;
debug("Second DDR controller disabled\n");
}
#endif
}

@ -131,6 +131,7 @@ void board_add_ram_info(int use_default);
/* processor specific function */
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num, int step);
void remove_unused_controllers(fsl_ddr_info_t *info);
/* board specific function */
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,

Loading…
Cancel
Save