configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE

CONFIG_SYS_GBL_DATA_SIZE is not used any more.
The size of struct "global_data" is automatically calculated
by asm-offsets. (See lib/asm-offsets.c)

GENERATED_GBL_DATA_SIZE should be used instead of
CONFIG_SYS_GBL_DATA_SIZE.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

include/configs/M54418TWR.h

@@ -268,10 +268,8 @@
 /* End of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #define CONFIG_SYS_INIT_RAM_CTRL	0x221
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	256
 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - \
-					CONFIG_SYS_GBL_DATA_SIZE) - 32)
+					GENERATED_GBL_DATA_SIZE) - 32)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
 

include/configs/MERGERBOX.h

@@ -121,9 +121,8 @@
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE -\
-					 CONFIG_SYS_GBL_DATA_SIZE)
+					 GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup

include/configs/P1023RDS.h

@@ -194,9 +194,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_END	0x00004000	/* End of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	\
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024) /* Reserve 256 kB for Mon */

include/configs/ac14xx.h

@@ -289,9 +289,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE
 #define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 CONFIG_SYS_GBL_DATA_SIZE)
+					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

include/configs/adp-ag101.h

@@ -139,11 +139,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(512 << 10)
 
 /*
- * size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
  * AHB Controller configuration
  */
 #define CONFIG_FTAHBC020S

include/configs/adp-ag101p.h

@@ -139,11 +139,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(512 << 10)
 
 /*
- * size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
  * AHB Controller configuration
  */
 #define CONFIG_FTAHBC020S

include/configs/adp-ag102.h

@@ -204,11 +204,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 
 /*
- * size in bytes reserved for initial data
-*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
  * AHB Controller configuration
  */
 #define CONFIG_FTAHBC020S

include/configs/ap_sh4a_4a.h

@@ -134,8 +134,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* ENV setting */

include/configs/armadillo-800eva.h

@@ -94,7 +94,6 @@
 #define CONFIG_SYS_MONITOR_BASE		0x00000000
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 #define CONFIG_SYS_TEXT_BASE	0xE80C0000
 

include/configs/devkit3250.h

@@ -29,7 +29,6 @@
  */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_MALLOC_LEN		SZ_1M
-#define CONFIG_SYS_GBL_DATA_SIZE	128
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
 #define CONFIG_SYS_TEXT_BASE		0x83FA0000

include/configs/dlvision-10g.h

@@ -217,9 +217,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*

include/configs/ecovec.h

@@ -158,8 +158,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* ENV setting */

include/configs/io.h

@@ -198,9 +198,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*

include/configs/iocon.h

@@ -238,9 +238,8 @@ int fpga_gpio_get(unsigned int bus, int pin);
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*

include/configs/km/km83xx-common.h

@@ -84,7 +84,6 @@
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 						GENERATED_GBL_DATA_SIZE)
 

include/configs/koelsch.h

@@ -106,7 +106,6 @@
 #define CONFIG_SYS_MONITOR_BASE		0x00000000
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /* FLASH */

include/configs/kzm9g.h

@@ -88,7 +88,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE	(KZM_FLASH_BASE)
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 #define CONFIG_SYS_TEXT_BASE		0x00000000

include/configs/lager.h

@@ -109,7 +109,6 @@
 #define CONFIG_SYS_MONITOR_BASE		0x00000000
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 #if defined(CONFIG_SYS_USE_BOOT_NORFLASH)

include/configs/mxs.h

@@ -59,7 +59,6 @@
 
 /* Memory sizes */
 #define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
 #define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
 #define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
 

include/configs/o2dnt-common.h

@@ -275,10 +275,8 @@
 #define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
 #endif
 
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 CONFIG_SYS_GBL_DATA_SIZE)
+					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

include/configs/r0p7734.h

@@ -140,8 +140,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* ENV setting */

include/configs/shmin.h

@@ -62,7 +62,6 @@
 #define CONFIG_SYS_MONITOR_BASE		(SHMIN_FLASH_BASE_1 + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	256
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /* FLASH */

include/configs/snowball.h

@@ -41,8 +41,6 @@
 #define CONFIG_ENV_SIZE		(8*1024)
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 256*1024)
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
-
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_SAVEENV

include/configs/u8500_href.h

@@ -29,7 +29,6 @@
 #define CONFIG_ENV_SIZE		(128*1024)
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 256*1024)
 #endif
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
 
 /*
  * PL011 Configuration

include/configs/vl_ma2sc.h

@@ -363,7 +363,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		\
 	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #ifndef CONFIG_RAMLOAD
 #define CONFIG_BOOTCOMMAND		"run nfsboot"