ARM: mxs: Added application UART driver

The driver makes it possible to use an application UART as the U-Boot output console for Freescale i.MX23/i.MX28 devices. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
12 years ago · 661edaafd4
parent 8907c2c504
commit 661edaafd4
4 changed files with 374 additions and 0 deletions
--- a/arch/arm/include/asm/arch-mxs/regs-uartapp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-uartapp.h
@ -0,0 +1,220 @@
+/*
+ * Freescale MXS UARTAPP Register Definitions
+ *
+ * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ARCH_ARM___MXS_UARTAPP_H
+#define __ARCH_ARM___MXS_UARTAPP_H
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_uartapp_regs {
+	mxs_reg_32(hw_uartapp_ctrl0)
+	mxs_reg_32(hw_uartapp_ctrl1)
+	mxs_reg_32(hw_uartapp_ctrl2)
+	mxs_reg_32(hw_uartapp_linectrl)
+	mxs_reg_32(hw_uartapp_linectrl2)
+	mxs_reg_32(hw_uartapp_intr)
+	mxs_reg_32(hw_uartapp_data)
+	mxs_reg_32(hw_uartapp_stat)
+	mxs_reg_32(hw_uartapp_debug)
+	mxs_reg_32(hw_uartapp_version)
+	mxs_reg_32(hw_uartapp_autobaud)
+};
+#endif
+
+#define UARTAPP_CTRL0_SFTRST_MASK				(1 << 31)
+#define UARTAPP_CTRL0_CLKGATE_MASK			(1 << 30)
+#define UARTAPP_CTRL0_RUN_MASK				(1 << 29)
+#define UARTAPP_CTRL0_RX_SOURCE_MASK			(1 << 28)
+#define UARTAPP_CTRL0_RXTO_ENABLE_MASK			(1 << 27)
+#define UARTAPP_CTRL0_RXTIMEOUT_OFFSET			16
+#define UARTAPP_CTRL0_RXTIMEOUT_MASK			(0x7FF << 16)
+#define UARTAPP_CTRL0_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL0_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL1_RUN_MASK				(1 << 28)
+
+#define UARTAPP_CTRL1_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL1_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL2_INVERT_RTS_MASK			(1 << 31)
+#define UARTAPP_CTRL2_INVERT_CTS_MASK			(1 << 30)
+#define UARTAPP_CTRL2_INVERT_TX_MASK			(1 << 29)
+#define UARTAPP_CTRL2_INVERT_RX_MASK			(1 << 28)
+#define UARTAPP_CTRL2_RTS_SEMAPHORE_MASK			(1 << 27)
+#define UARTAPP_CTRL2_DMAONERR_MASK			(1 << 26)
+#define UARTAPP_CTRL2_TXDMAE_MASK				(1 << 25)
+#define UARTAPP_CTRL2_RXDMAE_MASK				(1 << 24)
+#define UARTAPP_CTRL2_RXIFLSEL_OFFSET			20
+#define UARTAPP_CTRL2_RXIFLSEL_MASK			(0x7 << 20)
+
+#define UARTAPP_CTRL2_RXIFLSEL_NOT_EMPTY		(0x0 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_QUARTER		(0x1 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_HALF		(0x2 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_THREE_QUARTERS		(0x3 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_SEVEN_EIGHTHS		(0x4 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID5		(0x5 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID6		(0x6 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID7		(0x7 << 20)
+#define UARTAPP_CTRL2_TXIFLSEL_OFFSET			16
+#define UARTAPP_CTRL2_TXIFLSEL_MASK			(0x7 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_EMPTY			(0x0 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_QUARTER		(0x1 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_HALF		(0x2 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_THREE_QUARTERS		(0x3 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_SEVEN_EIGHTHS		(0x4 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID5		(0x5 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID6		(0x6 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID7		(0x7 << 16)
+#define UARTAPP_CTRL2_CTSEN_MASK				(1 << 15)
+#define UARTAPP_CTRL2_RTSEN_MASK				(1 << 14)
+#define UARTAPP_CTRL2_OUT2_MASK				(1 << 13)
+#define UARTAPP_CTRL2_OUT1_MASK				(1 << 12)
+#define UARTAPP_CTRL2_RTS_MASK				(1 << 11)
+#define UARTAPP_CTRL2_DTR_MASK				(1 << 10)
+#define UARTAPP_CTRL2_RXE_MASK				(1 << 9)
+#define UARTAPP_CTRL2_TXE_MASK				(1 << 8)
+#define UARTAPP_CTRL2_LBE_MASK				(1 << 7)
+#define UARTAPP_CTRL2_USE_LCR2_MASK			(1 << 6)
+
+#define UARTAPP_CTRL2_SIRLP_MASK				(1 << 2)
+#define UARTAPP_CTRL2_SIREN_MASK				(1 << 1)
+#define UARTAPP_CTRL2_UARTEN_MASK				0x01
+
+#define UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET			16
+#define UARTAPP_LINECTRL_BAUD_DIVINT_MASK			(0xFFFF << 16)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET		6
+
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL_SPS_MASK				(1 << 7)
+#define UARTAPP_LINECTRL_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL_FEN_MASK				(1 << 4)
+#define UARTAPP_LINECTRL_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL_EPS_MASK				(1 << 2)
+#define UARTAPP_LINECTRL_PEN_MASK				(1 << 1)
+#define UARTAPP_LINECTRL_BRK_MASK				1
+
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_OFFSET		16
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_MASK		(0xFFFF << 16)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVINT_OFFSET	6
+
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL2_SPS_MASK			(1 << 7)
+#define UARTAPP_LINECTRL2_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL2_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL2_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL2_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL2_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL2_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL2_FEN_MASK			(1 << 4)
+#define UARTAPP_LINECTRL2_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL2_EPS_MASK			(1 << 2)
+#define UARTAPP_LINECTRL2_PEN_MASK			(1 << 1)
+
+#define UARTAPP_INTR_ABDIEN_MASK				(1 << 27)
+#define UARTAPP_INTR_OEIEN_MASK				(1 << 26)
+#define UARTAPP_INTR_BEIEN_MASK				(1 << 25)
+#define UARTAPP_INTR_PEIEN_MASK				(1 << 24)
+#define UARTAPP_INTR_FEIEN_MASK				(1 << 23)
+#define UARTAPP_INTR_RTIEN_MASK				(1 << 22)
+#define UARTAPP_INTR_TXIEN_MASK				(1 << 21)
+#define UARTAPP_INTR_RXIEN_MASK				(1 << 20)
+#define UARTAPP_INTR_DSRMIEN_MASK				(1 << 19)
+#define UARTAPP_INTR_DCDMIEN_MASK				(1 << 18)
+#define UARTAPP_INTR_CTSMIEN_MASK				(1 << 17)
+#define UARTAPP_INTR_RIMIEN_MASK				(1 << 16)
+
+#define UARTAPP_INTR_ABDIS_MASK				(1 << 11)
+#define UARTAPP_INTR_OEIS_MASK				(1 << 10)
+#define UARTAPP_INTR_BEIS_MASK				(1 << 9)
+#define UARTAPP_INTR_PEIS_MASK				(1 << 8)
+#define UARTAPP_INTR_FEIS_MASK				(1 << 7)
+#define UARTAPP_INTR_RTIS_MASK				(1 << 6)
+#define UARTAPP_INTR_TXIS_MASK				(1 << 5)
+#define UARTAPP_INTR_RXIS_MASK				(1 << 4)
+#define UARTAPP_INTR_DSRMIS_MASK				(1 << 3)
+#define UARTAPP_INTR_DCDMIS_MASK				(1 << 2)
+#define UARTAPP_INTR_CTSMIS_MASK				(1 << 1)
+#define UARTAPP_INTR_RIMIS_MASK				0x1
+
+#define UARTAPP_DATA_DATA_OFFSET				0
+#define UARTAPP_DATA_DATA_MASK				0xFFFFFFFF
+#define UARTAPP_STAT_PRESENT_MASK				(1 << 31)
+#define UARTAPP_STAT_PRESENT_UNAVAILABLE		(0x0 << 31)
+#define UARTAPP_STAT_PRESENT_AVAILABLE			(0x1 << 31)
+
+#define UARTAPP_STAT_HISPEED_MASK				(1 << 30)
+#define UARTAPP_STAT_HISPEED_UNAVAILABLE		(0x0 << 30)
+#define UARTAPP_STAT_HISPEED_AVAILABLE			(0x1 << 30)
+
+#define UARTAPP_STAT_BUSY_MASK				(1 << 29)
+#define UARTAPP_STAT_CTS_MASK				(1 << 28)
+#define UARTAPP_STAT_TXFE_MASK				(1 << 27)
+#define UARTAPP_STAT_RXFF_MASK				(1 << 26)
+#define UARTAPP_STAT_TXFF_MASK				(1 << 25)
+#define UARTAPP_STAT_RXFE_MASK				(1 << 24)
+#define UARTAPP_STAT_RXBYTE_INVALID_OFFSET			20
+#define UARTAPP_STAT_RXBYTE_INVALID_MASK		(0xF << 20)
+
+#define UARTAPP_STAT_OERR_MASK				(1 << 19)
+#define UARTAPP_STAT_BERR_MASK				(1 << 18)
+#define UARTAPP_STAT_PERR_MASK				(1 << 17)
+#define UARTAPP_STAT_FERR_MASK				(1 << 16)
+#define UARTAPP_STAT_RXCOUNT_OFFSET				0
+#define UARTAPP_STAT_RXCOUNT_MASK				0xFFFF
+
+#define UARTAPP_DEBUG_RXIBAUD_DIV_OFFSET			16
+#define UARTAPP_DEBUG_RXIBAUD_DIV_MASK				(0xFFFF << 16)
+
+#define UARTAPP_DEBUG_RXFBAUD_DIV_OFFSET			10
+#define UARTAPP_DEBUG_RXFBAUD_DIV_MASK				(0x3F << 10)
+
+#define UARTAPP_DEBUG_TXDMARUN_MASK			(1 << 5)
+#define UARTAPP_DEBUG_RXDMARUN_MASK			(1 << 4)
+#define UARTAPP_DEBUG_TXCMDEND_MASK			(1 << 3)
+#define UARTAPP_DEBUG_RXCMDEND_MASK			(1 << 2)
+#define UARTAPP_DEBUG_TXDMARQ_MASK			(1 << 1)
+#define UARTAPP_DEBUG_RXDMARQ_MASK			0x01
+
+#define UARTAPP_VERSION_MAJOR_OFFSET			24
+#define UARTAPP_VERSION_MAJOR_MASK			(0xFF << 24)
+
+#define UARTAPP_VERSION_MINOR_OFFSET			16
+#define UARTAPP_VERSION_MINOR_MASK			(0xFF << 16)
+
+#define UARTAPP_VERSION_STEP_OFFSET				0
+#define UARTAPP_VERSION_STEP_MASK				0xFFFF
+
+#define UARTAPP_AUTOBAUD_REFCHAR1_OFFSET			24
+#define UARTAPP_AUTOBAUD_REFCHAR1_MASK				(0xFF << 24)
+
+#define UARTAPP_AUTOBAUD_REFCHAR0_OFFSET			16
+#define UARTAPP_AUTOBAUD_REFCHAR0_MASK				(0xFF << 16)
+
+#define UARTAPP_AUTOBAUD_UPDATE_TX_MASK			(1 << 4)
+#define UARTAPP_AUTOBAUD_TWO_REF_CHARS_MASK		(1 << 3)
+#define UARTAPP_AUTOBAUD_START_WITH_RUNBIT_MASK		(1 << 2)
+#define UARTAPP_AUTOBAUD_START_BAUD_DETECT_MASK		(1 << 1)
+#define UARTAPP_AUTOBAUD_BAUD_DETECT_ENABLE_MASK		0x01
+#endif /* __ARCH_ARM___UARTAPP_H */
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@ -38,6 +38,7 @@ COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
 COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
 COBJS-$(CONFIG_FSL_LPUART) += serial_lpuart.o
+COBJS-$(CONFIG_MXS_AUART) += mxs_auart.o

 ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_USB_TTY) += usbtty.o
--- a/drivers/serial/mxs_auart.c
+++ b/drivers/serial/mxs_auart.c
@ -0,0 +1,151 @@
+/*
+ * Freescale i.MX23/i.MX28 AUART driver
+ *
+ * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com>
+ *
+ * Based on the MXC serial driver:
+ *
+ * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Further based on the Linux mxs-auart.c driver:
+ *
+ * Freescale STMP37XX/STMP38X Application UART drkiver
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <serial.h>
+#include <linux/compiler.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-uartapp.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_MXS_AUART_BASE
+#error "CONFIG_MXS_AUART_BASE must be set to the base UART to use"
+#endif
+
+/* AUART clock always supplied by XTAL and always 24MHz */
+#define MXS_AUART_CLK 24000000
+
+static struct mxs_uartapp_regs *get_uartapp_registers(void)
+{
+	return (struct mxs_uartapp_regs *)CONFIG_MXS_AUART_BASE;
+}
+
+/**
+ * Sets the baud rate and settings.
+ * The settings are: 8 data bits, no parit and 1 stop bit.
+ */
+void mxs_auart_setbrg(void)
+{
+	u32 div;
+	u32 linectrl = 0;
+	struct mxs_uartapp_regs *regs = get_uartapp_registers();
+
+	if (!gd->baudrate)
+		gd->baudrate = CONFIG_BAUDRATE;
+
+	/*
+	 * From i.MX28 datasheet:
+	 * div is calculated by calculating UARTCLK*32/baudrate, rounded to int
+	 * div must be between 0xEC and 0x003FFFC0 inclusive
+	 * Lowest 6 bits of div goes in BAUD_DIVFRAC part of LINECTRL register
+	 * Next 16 bits goes in BAUD_DIVINT part of LINECTRL register
+	 */
+	div = (MXS_AUART_CLK * 32) / gd->baudrate;
+	if (div < 0xEC || div > 0x003FFFC0)
+		return;
+
+	linectrl |= ((div & UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK) <<
+		UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET) &
+		UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK;
+	linectrl |= ((div >> UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET) <<
+		UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET) &
+		UARTAPP_LINECTRL_BAUD_DIVINT_MASK;
+
+	/* Word length: 8 bits */
+	linectrl |= UARTAPP_LINECTRL_WLEN_8BITS;
+
+	/* Enable FIFOs. */
+	linectrl |= UARTAPP_LINECTRL_FEN_MASK;
+
+	/* Write above settings, no parity, 1 stop bit */
+	writel(linectrl, &regs->hw_uartapp_linectrl);
+}
+
+int mxs_auart_init(void)
+{
+	struct mxs_uartapp_regs *regs = get_uartapp_registers();
+	/* Reset everything */
+	mxs_reset_block(&regs->hw_uartapp_ctrl0_reg);
+	/* Disable interrupts */
+	writel(0, &regs->hw_uartapp_intr);
+	/* Set baud rate and settings */
+	serial_setbrg();
+	/* Disable RTS and CTS, ignore LINECTRL2 register */
+	writel(UARTAPP_CTRL2_RTSEN_MASK |
+			UARTAPP_CTRL2_CTSEN_MASK |
+			UARTAPP_CTRL2_USE_LCR2_MASK,
+			&regs->hw_uartapp_ctrl2_clr);
+	/* Enable receiver, transmitter and UART */
+	writel(UARTAPP_CTRL2_RXE_MASK |
+			UARTAPP_CTRL2_TXE_MASK |
+			UARTAPP_CTRL2_UARTEN_MASK,
+			&regs->hw_uartapp_ctrl2_set);
+	return 0;
+}
+
+void mxs_auart_putc(const char c)
+{
+	struct mxs_uartapp_regs *regs = get_uartapp_registers();
+	/* Wait in loop while the transmit FIFO is full */
+	while (readl(&regs->hw_uartapp_stat) & UARTAPP_STAT_TXFF_MASK)
+		;
+
+	writel(c, &regs->hw_uartapp_data);
+
+	if (c == '\n')
+		mxs_auart_putc('\r');
+}
+
+int mxs_auart_tstc(void)
+{
+	struct mxs_uartapp_regs *regs = get_uartapp_registers();
+	/* Checks if receive FIFO is empty */
+	return !(readl(&regs->hw_uartapp_stat) & UARTAPP_STAT_RXFE_MASK);
+}
+
+int mxs_auart_getc(void)
+{
+	struct mxs_uartapp_regs *regs = get_uartapp_registers();
+	/* Wait until a character is available to read */
+	while (!mxs_auart_tstc())
+		;
+	/* Read the character from the data register */
+	return readl(&regs->hw_uartapp_data) & 0xFF;
+}
+
+static struct serial_device mxs_auart_drv = {
+	.name = "mxs_auart_serial",
+	.start = mxs_auart_init,
+	.stop = NULL,
+	.setbrg = mxs_auart_setbrg,
+	.putc = mxs_auart_putc,
+	.puts = default_serial_puts,
+	.getc = mxs_auart_getc,
+	.tstc = mxs_auart_tstc,
+};
+
+void mxs_auart_initialize(void)
+{
+	serial_register(&mxs_auart_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &mxs_auart_drv;
+}
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@ -159,6 +159,7 @@ serial_initfunc(pl01x_serial_initialize);
 serial_initfunc(s3c44b0_serial_initialize);
 serial_initfunc(sa1100_serial_initialize);
 serial_initfunc(sh_serial_initialize);
+serial_initfunc(mxs_auart_initialize);

 /**
 * serial_register() - Register serial driver with serial driver core
@ -251,6 +252,7 @@ void serial_initialize(void)
 	s3c44b0_serial_initialize();
 	sa1100_serial_initialize();
 	sh_serial_initialize();
+	mxs_auart_initialize();

 	serial_assign(default_serial_console()->name);
 }