From 699f05125509249072a0b865c8d35520d97cd501 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 15 Jul 2008 22:22:44 +0200 Subject: [PATCH] Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile Signed-off-by: Wolfgang Denk --- CHANGELOG | 1107 +++++++++++++++++++++++++++++++++++ Makefile | 216 +++---- board/ads5121/README | 2 - board/freescale/common/sys_eeprom.c | 2 - common/cmd_bootm.c | 18 +- doc/README.mvbc_p | 5 +- 6 files changed, 1228 insertions(+), 122 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index b880a3c..0e317cb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,1069 @@ +commit bcab74baa6b1b1c969038ab6f64a186239180405 +Author: Hugo Villeneuve +Date: Tue Jul 15 11:23:02 2008 -0400 + + Round the serial port clock divisor value returned by calc_divisor() + + Round the serial port clock divisor value returned by + calc_divisor() + + Signed-off-by: Hugo Villeneuve + Acked-by: Gerald Van Baren + +commit 0328ef0edfe950f0b7b8b368dae482531506b74a +Author: Robin Getz +Date: Tue Jul 15 21:44:46 2008 +0200 + + Fix DHCP protocol so U-Boot does not respond too early + on the network with it's offered IP number; it should not reply until + after it has received a DHCP ACK message. Also ensures that U-Boot + does it's DHCPREQUEST as broadcast (per RFC 2131). + + Signed-off-by: Robin Getz + Acked-by: Ben Warren + Signed-off-by: Wolfgang Denk + +commit 7288f972fcaee14a9741cb08c8688a23874b4a2e +Author: Sebastian Siewior +Date: Tue Jul 15 13:35:23 2008 +0200 + + cfi_flash: make the command u32 only + + This got changed by commit 93c56f212c + [cfi_flash: support of long cmd in U-boot.] + + Long is the wrong type because it will behave differently on 64bit + machines in a way that is probably not expected. u32 should be + enough. + + Cc: Alexey Korolev + Cc: Vasiliy Leonenko + Signed-off-by: Sebastian Siewior + +commit 31cfe57491b183acae575d486729e158f016c27b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Jul 14 23:48:41 2008 +0200 + + tools/gitignore: update to all generated files + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e +Author: Andre Schwarz +Date: Wed Jul 9 18:30:44 2008 +0200 + + mpc5xxx: Add MVBC_P board support + + The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet + controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. + + Signed-off-by: Andre Schwarz + Signed-off-by: Grant Likely + +commit e2d31fb3450653115452144363d5bde4e5e3e693 +Author: Timur Tabi +Date: Thu Jun 19 17:56:11 2008 -0500 + + Update Freescale sys_eeprom.c to handle CCID formats + + Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The + NXID format replaces the older CCID format, but it's important to support both + since most boards out there still use the CCID format. This change is in + preparation for using one file to handle both formats. This will also unify + EEPROM support for all Freescale 85xx and 86xx boards. + + Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR + instead of ID_EEPROM_ADDR. + + Signed-off-by: Timur Tabi + +commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a +Author: Nobuhiro Iwamatsu +Date: Fri Jul 11 17:22:43 2008 +0900 + + pci: sh: Add pci_skip_dev and pci_print_dev function + + Add function of new PCI, pci_skip_dev and pci_print_dev. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 1107014e835ec9d46c0333f4211d104f77442db0 +Author: Andy Fleming +Date: Mon Jul 14 20:29:07 2008 -0500 + + Clean up INIT_RAM options + + The L2_INIT_RAM option was unused, and recent changes to the TLB code + meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce + the amount of mapped space attached to nothing, we change things so the TLBs + get cleared. + + Signed-off-by: Andy Fleming + +commit 4524561820a9327e89107854b3a7187800ccf719 +Author: Andy Fleming +Date: Mon Jul 14 20:26:57 2008 -0500 + + Remove fake flash bank from 8544 DS + + The fake flash bank was generating errors for anyone who didn't have a + PromJET hooked up to the board. As that constitutes the vast majority of + users, we remove it. + + Signed-off-by: Andy Fleming + +commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3 +Author: Kumar Gala +Date: Mon Jul 14 14:07:03 2008 -0500 + + MPC8544DS: Add ATI Video card support + + Add support for using a PCIe ATI Video card on PCIe2. + + Signed-off-by: Kumar Gala + +commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15 +Author: Kumar Gala +Date: Mon Jul 14 14:07:02 2008 -0500 + + 85xx: Add some L1/L2 SPR register definitions + + Add new L1/L2 SPRs related to e500mc cache config and control. + + Signed-off-by: Kumar Gala + +commit e5852787f0c3c442a276262f13d91ca450605ac0 +Author: Kumar Gala +Date: Mon Jul 14 14:07:01 2008 -0500 + + MPC8544DS: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala + +commit 73f15a060f67a2462551c334215bd20fac6b81d1 +Author: Kumar Gala +Date: Mon Jul 14 14:07:00 2008 -0500 + + 85xx: Cleanup L2 cache size detection + + The L2 size detection code was a bit confusing and we kept having to add + code to it to handle new processors. Change the sense of detection so we + look for the older processors that aren't changing. + + Also added support for 1M cache size on 8572. + + Signed-off-by: Kumar Gala + +commit c3ca7e5e00a24451f20df3bded9a61ba541921df +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:08 2008 -0400 + + sbc8560: enable CONFIG_OF_LIBFDT by default + + Make the default build for the sbc8560 board be powerpc + capable with libfdt support. + + Signed-off-by: Paul Gortmaker + +commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd +Author: Andy Fleming +Date: Mon Jul 14 20:04:40 2008 -0500 + + Fix indentation for default boot environment variables + + This was proposed by Paul Gortmaker in response to Wolfgang's comments on + similar #defines in sbc8560.h. + + Signed-off-by: Andy Fleming + +commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:07 2008 -0400 + + sbc8560: add default fdt values + + Add in the default fdt settings and the typical EXTRA_ENV + settings as borrowed from the mpc8560ads. Fix a couple + of stale references to the mpc8560ads dating back to the + original clone/fork. + + Signed-off-by: Paul Gortmaker + Signed-off-by: Andy Fleming + +commit d04e76edf92f7f89696989e8702b97e020455af3 +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:06 2008 -0400 + + sbc8560: add in ft_board_setup() + + Add in for the sbc8560, the ft_board_setup() routine, based on what is + in use for the Freescale MPC8560ADS board. + + Signed-off-by: Paul Gortmaker + +commit c158bcaca3b31cbe38c4143812e6170e38a57393 +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:05 2008 -0400 + + sbc8560: define eth0 and eth1 instead of eth1 and eth2 + + The existing config doesn't define CONFIG_HAS_ETH0, and so the + fdt support doesn't update the zeros in the dtb local-mac with + real data from the u-boot env. Since the existing config is + tailored to just two interfaces, get rid of the ETH2 definitions + at the same time. + + Also don't include any end user specific data into the environment + by default -- things like MAC address, network parameters etc. need + to come from the end user. + + Signed-off-by: Paul Gortmaker + Signed-off-by: Andy Fleming + +commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:04 2008 -0400 + + sbc8560: properly set cs0_bnds for 512MB + + The sbc8560 board ships with 512MB of memory installed, + but the current cs0_bnds is hard coded for 256MB. Set the + value based on CFG_SDRAM_SIZE. + + Signed-off-by: Paul Gortmaker + +commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27 +Author: Paul Gortmaker +Date: Fri Jul 11 15:33:03 2008 -0400 + + sbc8560: proper definitions for TSEC. + + The definitions for the TSEC have become out of date. There is no + longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. + Update to match those of other boards, like the MPC8560ADS. + + Signed-off-by: Paul Gortmaker + Acked-by: Ben Warren + +commit 71074abbe0c76429577aff58aeff0a24ad210b23 +Author: Paul Gortmaker +Date: Wed Jul 9 13:23:05 2008 -0400 + + 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq + + Some boards that have external 16550 UARTs don't have a direct + tie between bi_busfreq and the clock used for the UARTs. Boards + that do have such a tie should set CFG_NS16550_CLK to be + get_bus_freq(0) -- which most of them do already. + + Signed-off-by: Paul Gortmaker + Acked-by: Kim Phillips + +commit 24ef76f320fbadf074105229826514db140f939f +Author: Andrew Klossner +Date: Wed Jul 2 07:03:53 2008 -0700 + + Change the temp map to ROM to align addresses to page size. + + With a page size of BOOKE_PAGESZ_16M, both the real and effective + addresses must be multiples of 16MB. The hardware silently truncates + them so the code happens to work. This patch clarifies the situation + by establishing addresses that the hardware doesn't need to truncate. + + Signed-off-by: Andrew Klossner + Signed-off-by: Andy Fleming + +commit 06b4186c10204b6683edb047ac5f506fb0ce0937 +Author: Kim Phillips +Date: Tue Jun 17 17:45:22 2008 -0500 + + mpc85xx: use IS_E_PROCESSOR macro + + Signed-off-by: Kim Phillips + +commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78 +Author: Kim Phillips +Date: Mon Jun 16 15:55:53 2008 -0500 + + fdt: add crypto node handling for MPC8{3, 5}xxE processors + + Delete the crypto node if not on an E-processor. If on 8360 or 834x family, + check rev and up-rev crypto node (to SEC rev. 2.4 property values) + if on an 'EA' processor, e.g. MPC8349EA. + + Signed-off-by: Kim Phillips + +commit 85e5808e8ea9f77da5219f23394112f0b424fa5e +Author: Hugo Villeneuve +Date: Fri Jul 11 15:10:11 2008 -0400 + + ARM DaVinci: Remove extern phy_t declaration by moving code to proper place + + ARM DaVinci: Remove extern phy_t declaration by moving + code to proper place. + + Signed-off-by: Hugo Villeneuve + +commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971 +Author: Hugo Villeneuve +Date: Fri Jul 11 15:10:10 2008 -0400 + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init() + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE + and prototype of i2c_init(). + + Signed-off-by: Hugo Villeneuve + +commit 348753d416cd2c9e7ec6520a544c8f33cf02a560 +Author: Kumar Gala +Date: Mon Jul 14 14:03:02 2008 -0500 + + Fix some more printf() format problems. + + Signed-off-by: Kumar Gala + +commit 45b16d22c64674ccd8c4637456a987463609141c +Author: Wolfgang Denk +Date: Mon Jul 14 22:38:42 2008 +0200 + + Fix coding style; make code better parsable by external tools + + Signed-off-by: Wolfgang Denk + +commit b880cbf207b1c109d3a661417a8feddcbd729a9d +Author: Wolfgang Denk +Date: Mon Jul 14 21:19:08 2008 +0200 + + cpu/i386/serial.c: Fix syntax errors + + Signed-off-by: Wolfgang Denk + +commit e2d45e6f4d9919e1afeac5e09557b2252832fccf +Author: Wolfgang Denk +Date: Mon Jul 14 20:41:35 2008 +0200 + + elppc board: Coding style cleanup. + + Signed-off-by: Wolfgang Denk + +commit 82b24a8a505fc81466484b3c55b574ee0b4205bc +Author: Wolfgang Denk +Date: Mon Jul 14 20:40:22 2008 +0200 + + elppc board: fix syntax error. + + Signed-off-by: Wolfgang Denk + +commit 0fe340585a6a48bd392d315b0dd84d068b1c3790 +Author: Wolfgang Denk +Date: Mon Jul 14 20:38:26 2008 +0200 + + EB+MCF-EV123 board: fix coding style (alingment) + + Signed-off-by: Wolfgang Denk + +commit 6841785a0bb0f38175456a923edd634fb7dd6947 +Author: Wolfgang Denk +Date: Mon Jul 14 20:36:44 2008 +0200 + + EB+MCF-EV123 board: fix syntx error + + Signed-off-by: Wolfgang Denk + +commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904 +Author: Andy Fleming +Date: Mon Jul 7 18:02:08 2008 -0500 + + Remove LBC_CACHE_BASE from 8544 DS + + The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping + space for some anyway, we were allowing speculative loads into unmapped space, + which would cause an exception (annoying, even if ultimately harmless). + Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the + problem. + + Signed-off-by: Andy Fleming + +commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90 +Author: Wolfgang Denk +Date: Mon Jul 14 15:19:07 2008 +0200 + + Code cleanup: fix old style assignment ambiguities like "=-" etc. + + Signed-off-by: Wolfgang Denk + +commit d7854223c5c85b5849fbf422cc8ac0efef461c37 +Author: Wolfgang Denk +Date: Mon Jul 14 15:10:53 2008 +0200 + + AmigaOneG3SE: remove dead and incomplete files + + Signed-off-by: Wolfgang Denk + +commit b64f190b7a34224df09b559ca111eb1b733f00ad +Author: Wolfgang Denk +Date: Mon Jul 14 15:06:35 2008 +0200 + + Fix printf() format issues with sizeof_t types by using %zu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk + +commit f354b73e16a86f9e9085471a830605f74f84ea5d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Jul 14 14:11:45 2008 +0200 + + vsprintf: add z and t options + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 25dbe98abb686d8210e1731fba85ced7d3ce874c +Author: Wolfgang Denk +Date: Sun Jul 13 23:07:35 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk + +commit d5996dd555edf52721b7691a4c59de016251ed39 +Author: Wolfgang Denk +Date: Sun Jul 13 19:51:00 2008 +0200 + + Fix some more printf() format problems. + + Signed-off-by: Wolfgang Denk + +commit 0f9d5f6d6e814907794995c6a22af752040c35d9 +Author: Wolfgang Denk +Date: Sun Jul 13 19:48:26 2008 +0200 + + ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype + + Signed-off-by: Wolfgang Denk + +commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34 +Author: Anatolij Gustschin +Date: Sat Jul 12 17:31:36 2008 +0200 + + Fix bug in Lime video driver + + We need to wait while drawing engine clears frame + buffer before any further software accesses to frame + buffer will be initiated. Otherwise software drawn + parts could be partially destroyed by the drawing + engine or even GDC chip freeze could occur (as + observed on socrates board). + + Signed-off-by: Anatolij Gustschin + +commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jul 12 14:36:34 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 18c8a28aad49803780bd8d52432ded528e37e701 +Author: Michal Simek +Date: Fri Jul 11 15:11:57 2008 +0200 + + hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722 + + Signed-off-by: Michal Simek + Acked-by: Stefan Roese + +commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 +Author: Michal Simek +Date: Fri Jul 11 11:50:53 2008 +0200 + + hwmon: Cleaning hwmon devices + + Clean Makefile + Move device specific values to driver for better reading + + Signed-off-by: Michal Simek + Acked-by: Stefan Roese + +commit c78fce699c7ff467ecd841da6a79f065180bf578 +Author: Michal Simek +Date: Fri Jul 11 10:43:13 2008 +0200 + + FIS: repare incorrect return value with ramdisk handling + + Microblaze and PowerPC use boot_get_ramdisk for loading + ramdisk to memory with checking return value. + Return 0 means success. Return 1 means failed. + Here is correspond part of code from bootm.c which check + return code. + + ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC, + &rd_data_start, &rd_data_end); + if (ret) + goto error; + + Signed-off-by: Michal Simek + +commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477 +Author: Michal Simek +Date: Fri Jul 11 10:10:32 2008 +0200 + + microblaze: Remove useless ancient headers + + Signed-off-by: Michal Simek + +commit 53ea981c3124b13c137c2d10e975b7c6672266e0 +Author: Michal Simek +Date: Fri Jul 11 10:10:31 2008 +0200 + + microblaze: Clean uartlite driver + + Redesign uartlite driver to in_be32 and out_be32 macros + Fix missing header in io.h + + Signed-off-by: Michal Simek + Acked-by: Grant Likely + +commit dbf3dfb386a2d5d2381814e39985ab2e21894550 +Author: Marcel Ziswiler +Date: Fri Jul 11 02:39:14 2008 +0200 + + Enable passing of ATAGs required by latest Linux kernel. + +commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a +Author: Hugo Villeneuve +Date: Fri Jul 11 10:24:15 2008 -0400 + + Fix integer overflow warning in calc_divisor() + + which happened when rounding the serial port clock divisor + + Signed-off-by: Hugo Villeneuve + +commit 6b760189d77f001684e3160b355c185ca3804961 +Author: Marcel Ziswiler +Date: Fri Jul 11 01:09:59 2008 +0200 + + Fix build time warnings in function mmc_decode_csd() + + Signed-off-by: Marcel Ziswiler + +commit c15947d6ce0d59925c97fdfac692476af6e262d0 +Author: Hugo Villeneuve +Date: Thu Jul 10 10:46:33 2008 -0400 + + ARM: Fix for broken compilation when defining CONFIG_CMD_ELF + + caused by missing dcache status/enable/disable functions. + + Signed-off-by: Hugo Villeneuve + +commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce +Author: Stefan Roese +Date: Thu Jul 10 13:53:31 2008 +0200 + + ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards + + This patch removes some ft_board_setup() functions from some 4xx boards. + This can be done since we now have a default weak implementation for this + in cpu/ppc4xx/fdt.c. Only board in need for a different/custom + implementation like canyonlands need their own version. + + Signed-off-by: Stefan Roese + +commit d39a089f8bc960ba9ae6a08fda5582b578620cc1 +Author: Wolfgang Denk +Date: Sun Jul 13 14:58:16 2008 +0200 + + Add last known maintainer for orphaned boards; reformat. + + Signed-off-by: Wolfgang Denk + +commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6 +Author: Haavard Skinnemoen +Date: Thu Jul 10 13:16:04 2008 +0200 + + Remove kharris@nexus-tech.net from MAINTAINERS + + Mail to kharris@nexus-tech.net bounces because the user doesn't exist + anymore. You can't be a maintainer without a valid e-mail address, so + move all boards that used to be maintained by Kyle Harris to the + "orphaned" list. + + Currently, only PowerPC has a list of orphaned boards, so this patch + creates one for ARM as well. + + Signed-off-by: Haavard Skinnemoen + +commit 17bd17071463b0cde391ac4a0863d600474b4ea1 +Author: Anatolij Gustschin +Date: Thu Jul 10 01:15:10 2008 +0200 + + at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260 + + On the at91sam9260ep development board there is an EEPROM + connected to the TWI interface (PA23, PA24 Peripheral A + multiplexing), so we cannot use these pins as ETX2, ETX3. + This patch configures PA10, PA11 pins for ETX2, ETX3 + instead of PA23, PA24 pins. + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Manuel Sahm + +commit f889265753ddf4465d9d580827bb9289bfac55d6 +Author: Kenneth Johansson +Date: Sat Jul 12 13:18:34 2008 -0600 + + fix DIU for small screens + + The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values + so it was not possible to set a slow pixel clock and thus prevented + display on small screens. + + Signed-off-by: Kenneth Johansson + Acked-by: John Rigby + +commit b60b8573875e650e4c69be667bfc88d3ed474a7c +Author: John Rigby +Date: Fri Jul 11 14:44:09 2008 -0600 + + ADS5121 cleanup compile warnings + + board/ads5121/iopin.c + Replace bit fields in struct iopin_t with a single + field and intialize it via plain old macros. + This fixes the type pun warnings and makes the code + more readable. + + board/ads5121/ads5121.c + Add include iopin.h to ads5121.c for the iopin_initialize + prototype. + + Add an extern void ads5121_diu_init(void) + + Signed-off-by: John Rigby + +commit bde63587622c4b830a27d1ddf7265843de9e994f +Author: Wolfgang Denk +Date: Fri Jul 11 22:56:11 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk + +commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8 +Author: Wolfgang Denk +Date: Fri Jul 11 22:55:31 2008 +0200 + + Fixed some out-of-tree build issues + + Signed-off-by: Wolfgang Denk + +commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82 +Author: TsiChung Liew +Date: Wed Jul 9 16:20:23 2008 -0500 + + ColdFire: Fix FB CS not setup properly for Mcf5282 + + Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If + CFG_CSn_RO is defined as 0, the chipselect will not + be assigned. + + Signed-off-by: TsiChung Liew + +commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a +Author: TsiChung Liew +Date: Wed Jul 9 15:47:27 2008 -0500 + + ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC + + Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time + clock module in cpu//cpu_init.c + + Signed-off-by: TsiChung Liew + +commit f94945b517f10e01927101679c62361e03d4e837 +Author: TsiChung Liew +Date: Wed Jul 9 15:25:01 2008 -0500 + + ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE + + Signed-off-by: TsiChung Liew + +commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab +Author: TsiChung Liew +Date: Wed Jul 9 15:21:44 2008 -0500 + + Fix compile error caused by missing timer function + + Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file + + Signed-off-by: TsiChung Liew + +commit c37ea031175b807c54e6bad9b270e9bede6c0078 +Author: TsiChung Liew +Date: Wed Jul 9 15:14:25 2008 -0500 + + Fix compile error caused by incorrect function return type + + Rename int mii_init(void) to void mii_init(void) + + Signed-off-by: TsiChung Liew + +commit ab4860b255239dbaecccdd002c8d11f4ef54dd75 +Author: TsiChung Liew +Date: Wed Jun 18 19:27:23 2008 -0500 + + ColdFire: Fix power up issue for MCF5235 + + Signed-off-by: TsiChung Liew + +commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11 +Author: TsiChung Liew +Date: Wed Jun 18 19:19:07 2008 -0500 + + ColdFire: Fix compiling error for MCF5275 + + The compiling error was caused by missing a closed parentheses + in speed.c + + Signed-off-by: TsiChung Liew + +commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3 +Author: TsiChung Liew +Date: Wed Jun 18 19:14:01 2008 -0500 + + ColdFire: Fix timer issue for MCF5272 + + The timer was assigned to wrong timer memory mapped which + caused udelay() and timer() not working properly. + + Signed-off-by: TsiChung Liew + +commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515 +Author: TsiChung Liew +Date: Wed Jun 18 19:12:13 2008 -0500 + + ColdFire: Change invalid JMP to BRA caught by new v4e toolchain + + Signed-off-by: Kurt Mahan + +commit 8371dc2066136be21e10b7b9293e469297d77298 +Author: TsiChung Liew +Date: Wed Jun 18 19:05:23 2008 -0500 + + ColdFire: Add -got=single param for new linux v4e toolchains + + Signed-off-by: Kurt Mahan + +commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7 +Author: TsiChung Liew +Date: Wed Jun 18 13:21:19 2008 -0500 + + ColdFire: Fix code flash configuration for M547x/M548x boards + + Signed-off-by: Kurt Mahan + +commit 6e37091afc07fdcc15590093fd066b0cb7399f85 +Author: TsiChung Liew +Date: Tue Jun 24 12:12:16 2008 -0500 + + ColdFire: Fix warning messages by passing correct data type in board.c + + Signed-off-by: TsiChung Liew + +commit 81cc32322acb1b3225ee45606ced48e2a14824dc +Author: TsiChung Liew +Date: Thu May 29 12:21:54 2008 -0500 + + ColdFire: Fix UART baudrate formula + + The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32" + can generate the wrong divisor due to integer division truncation. + Round the calculated divisor value by adding 1/2 the baudrate + before dividing by the baudrate. + + Signed-off-by: TsiChung Liew + Acked-by: Gerald Van Baren + +commit b578fb471444cbd7db1285701ba51343baaf73fb +Author: Stefan Roese +Date: Thu Jul 10 11:38:26 2008 +0200 + + ppc4xx: Fix include sequence in 4xx_pcie.c + + This patch now moves common.h to the top of the inlcude list. This + is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that + the phys_size_t/phys_addr_t are defined to the correct size in this + driver. + + Signed-off-by: Stefan Roese + +commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96 +Author: Wolfgang Denk +Date: Fri Jul 11 01:16:00 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk + +commit fdd70d1921b87287d9a99d1be99bc35226c2b412 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Jul 10 20:57:54 2008 +0200 + + MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c +Author: Sergey Lapin +Date: Thu Jun 5 11:06:29 2008 +0400 + + DataFlash AT45DB021 support + + Some boards based on AT91SAM926X-EK use smaller DF chips to keep + bootstrap, u-boot and its environment, using NAND or other external + storage for kernel and rootfs. This patch adds support for + small 1024x263 chip. + + Signed-off-by: Sergey Lapin + +commit 4109df6f75fc00ab7da56d286ba50149a0d16a69 +Author: Kim Phillips +Date: Thu Jul 10 14:00:15 2008 -0500 + + silence misc printf formatting compiler warnings + + Signed-off-by: Kim Phillips + +commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3 +Author: Markus Klotzbücher +Date: Thu Jul 10 14:47:09 2008 +0200 + + USB: shutdown USB before booting + + This patch fixes a potentially serious issue related to USB which was + discouvered by Martin Krause and fixed for + ARM920T. Martin wrote: + + Turn off USB to prevent the host controller from writing to the + SDRAM while Linux is booting. This could happen, because the HCCA + (Host Controller Communication Area) lies within the SDRAM and the + host controller writes continously to this area (as busmaster!), for + example to increase the HccaFrameNumber variable, which happens + every 1 ms. + + This is a slightly modified version of the patch in order to shutdown + USB when booting on all architectures. + + Signed-off-by: Markus Klotzbuecher + +commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8 +Author: Martha Marx +Date: Thu May 29 14:23:25 2008 -0400 + + Configuration changes for ADS5121 Rev 3 + + ADS5121 Rev 3 board is now the default config + + config targets are now + + ads5121_config + Rev 3 board with + PCI + M41T62 on board RTC + 512MB DRAM + + ads5121_rev2_config + Rev 2 board with + No PCI + 256MB DRAM + + Signed-off-by: Martha Marx + Acked-by: Grant Likely + Acked-by: John Rigby + +commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615 +Author: Martha Marx +Date: Thu May 29 15:37:21 2008 -0400 + + Consolidate ADS5121 IO Pin configuration + + Consolidate ADS5121 IO Pin configuration to one file + board/ads5121/iopin.c. + + Remove pin config from cpu/mpc512x/fec.c + + Signed-off-by: Martha Marx + Acked-by: Grant Likely + Acked-by: John Rigby + +commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7 +Author: Christian Eggers +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers + Acked-by: Markus Klotzbuecher + +commit cc83b27217f7380041fea386ddb6d6d9b261617d +Author: Harald Welte +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte + Acked-by: Markus Klotzbuecher + +commit 06c53beae1a726e707971c555613f09b270a2461 +Author: Wolfgang Denk +Date: Thu Jul 10 13:16:09 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk + +commit d4b5f3fa001228d76e2c3380cedadf804b802c2a +Author: Christian Eggers +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers + Acked-by: Markus Klotzbuecher + +commit e73b5212e0463a3db0af0a5c95c75bfb762ca973 +Author: Harald Welte +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte + Acked-by: Markus Klotzbuecher + +commit e870690bdca154943ecadd5212d2d59c1b9d391b +Author: Stefan Roese +Date: Thu Jul 10 10:10:54 2008 +0200 + + MTD/NAND: Fix printf format warning in nand code + + This patch fixes NAND related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese + +commit 10943c9afa25694bd9999461f4e9e50ce22fff2b +Author: Stefan Roese +Date: Thu Jul 10 10:00:45 2008 +0200 + + rtc: Fix printf format warning in m41t60.c + + Signed-off-by: Stefan Roese + +commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb +Author: Stefan Roese +Date: Tue Jul 8 12:01:47 2008 +0200 + + pci: Move PCI device configuration check into a separate weak function + + This patch moves the check, if a device should be skipped in PCI PNP + configuration into the function pci_skip_dev(). This function is defined + as weak so that it can be overwritten by a platform specific one if + needed. The check if the device should get printed in the PCI summary upon + bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function + pci_print_dev() which is also defined as weak too. + + Signed-off-by: Stefan Roese + +commit b002144e1dc21374b1ef5281fe6b5d014af96650 +Author: Stefan Roese +Date: Thu Jul 10 09:58:06 2008 +0200 + + ppc4xx: Fix printf format warnings now visible with the updated format check + + This patch fixes ppc4xx related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese + +commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3 +Author: Stefan Roese +Date: Wed Jul 9 17:33:57 2008 +0200 + + ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai + + Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. + To support such configurations, we "only" map the first 2GB via the TLB's. We + need some free virtual address space for the remaining peripherals like, SoC + devices, FLASH etc. + + Note that ECC is currently not supported on configurations with more than 2GB + SDRAM. This is because we only map the first 2GB on such systems, and therefore + the ECC parity byte of the remaining area can't be written. + + Signed-off-by: Stefan Roese + +commit cf1c2ed91df26903b956948f37f82de9e1158a89 +Author: Larry Johnson +Date: Sat Jun 14 17:02:49 2008 -0400 + + ppc4xx: Remove implementation of testdram() from Korat board support + + Signed-off-by: Larry Johnson + Signed-off-by: Stefan Roese + +commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e +Author: Larry Johnson +Date: Sat Jun 14 16:53:02 2008 -0400 + + ppc4xx: Update and add FDT to Korat board support + + Signed-off-by: Larry Johnson + Signed-off-by: Stefan Roese + +commit 4188f0491886b3b486164e819c0a83fdb97efd7d +Author: Wolfgang Denk +Date: Thu Jul 10 01:13:30 2008 +0200 + + Minor coding style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit 8915f1189c1d29d8be7f4de325702d90a8988219 Author: Paul Gortmaker Date: Wed Jul 9 17:50:45 2008 -0400 @@ -285,6 +1351,19 @@ Date: Tue Jul 8 12:03:24 2008 +0900 Signed-off-by: Nobuhiro Iwamatsu +commit 3473ab737282b08ad61841fcbb14c4d264a93a8e +Author: Jason Jin +Date: Tue May 13 11:50:36 2008 +0800 + + Feed the watchdog in u-boot for 8610 board. + + The watchdog on 8610 board is enabled by setting sw[6] + to on. Once enabled, the watchdog can not be disabled + by software. So feed the dog in u-boot is necessary for + normal operation. + + Signed-off-by: Jason Jin + commit 63676841ca2d603b13765f3f7b72ff1a61c23f90 Author: Hugo Villeneuve Date: Wed Jun 18 12:10:33 2008 -0400 @@ -748,6 +1827,18 @@ Date: Sun Jun 8 17:59:53 2008 +0200 Signed-off-by: Juergen Kilb Acked-by: Felix Radensky +commit dd1c5523d6f44e842e69f2fcb50788c6060eab86 +Author: Stefan Roese +Date: Tue Jul 1 17:03:19 2008 +0200 + + ppc4xx: Fix 460EX/GT PCIe port initialization + + This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was + configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing + this out. + + Signed-off-by: Stefan Roese + commit b571afde0295b007a45055ee49f8822c753a5651 Author: Jean-Christophe PLAGNIOL-VILLARD Date: Sat Jun 7 12:29:52 2008 +0200 @@ -1129,6 +2220,22 @@ Date: Thu Jun 12 12:40:11 2008 +0200 Acked-by: Stefan Roese Acked-by: Kumar Gala +commit a036b0443657fe0f4773786de9092251869f08ac +Author: Kumar Gala +Date: Thu Jun 19 01:45:50 2008 -0500 + + MPC8610HPCD: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala + +commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835 +Author: Kumar Gala +Date: Thu Jun 19 01:45:27 2008 -0500 + + MPC8641HPCN: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala + commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8 Author: Stefan Roese Date: Mon Jun 16 10:40:02 2008 +0200 diff --git a/Makefile b/Makefile index 4c7bfb0..369bbd7 100644 --- a/Makefile +++ b/Makefile @@ -23,8 +23,8 @@ VERSION = 1 PATCHLEVEL = 3 -SUBLEVEL = 3 -EXTRAVERSION = +SUBLEVEL = 4 +EXTRAVERSION = -rc1 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -493,6 +493,9 @@ aev_config: unconfig BC3450_config: unconfig @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 +cm5200_config: unconfig + @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 + cpci5200_config: unconfig @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd @@ -540,9 +543,6 @@ icecube_5100_config: unconfig jupiter_config: unconfig @$(MKCONFIG) jupiter ppc mpc5xxx jupiter -v38b_config: unconfig - @$(MKCONFIG) -a v38b ppc mpc5xxx v38b - inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 @@ -617,9 +617,20 @@ prs200_highboot_DDR_config: unconfig mecp5200_config: unconfig @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd +motionpro_config: unconfig + @$(MKCONFIG) motionpro ppc mpc5xxx motionpro + munices_config: unconfig @$(MKCONFIG) munices ppc mpc5xxx munices +MVBC_P_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mvbc_p + @ >$(obj)include/config.h + @[ -z "$(findstring MVBC_P,$@)" ] || \ + { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision + o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt @@ -644,9 +655,6 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc -cm5200_config: unconfig - @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 - spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc @@ -740,22 +748,17 @@ TQM5200_STK100_config: unconfig { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc + uc101_config: unconfig @$(MKCONFIG) uc101 ppc mpc5xxx uc101 -motionpro_config: unconfig - @$(MKCONFIG) motionpro ppc mpc5xxx motionpro -MVBC_P_config: unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)board/mvbc_p - @ >$(obj)include/config.h - @[ -z "$(findstring MVBC_P,$@)" ] || \ - { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } - @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision +v38b_config: unconfig + @$(MKCONFIG) -a v38b ppc mpc5xxx v38b ######################################################################### ## MPC512x Systems ######################################################################### + ads5121_config \ ads5121_rev2_config \ : unconfig @@ -1226,6 +1229,9 @@ CATcenter_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave +CMS700_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd + CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd @@ -1407,6 +1413,9 @@ quad100hd_config: unconfig sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 +sc3_config:unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 + sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include @@ -1425,9 +1434,6 @@ rainier_nand_config: unconfig @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk -sc3_config:unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 - taihu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc @@ -1440,9 +1446,6 @@ VOH405_config: unconfig VOM405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd -CMS700_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd - W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o @@ -1867,9 +1870,6 @@ M5275EVB_config : unconfig M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb -TASREG_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -1989,6 +1989,9 @@ M5485HFE_config : unconfig fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale +TASREG_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd + ######################################################################### ## MPC83xx Systems ######################################################################### @@ -2312,12 +2315,12 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 -ZUMA_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 - ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx +ZUMA_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 + #======================================================================== # ARM #======================================================================== @@ -2369,12 +2372,12 @@ csb637_config : unconfig kb9202_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 -mp2usb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 - m501sk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 +mp2usb_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + ######################################################################### ## Atmel ARM926EJ-S Systems ######################################################################### @@ -2411,6 +2414,18 @@ cp922_XA10_config \ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ +davinci_dvevm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci + +davinci_schmoogie_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci + +davinci_sffsdr_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci + +davinci_sonata_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x @@ -2427,21 +2442,6 @@ netstar_config: unconfig omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn -omap5912osk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ @@ -2465,6 +2465,9 @@ omap1610h2_cs_autoboot_config: unconfig fi; @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap +omap5912osk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap + xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) omap730p2_config \ @@ -2526,9 +2529,16 @@ trab_old_config: unconfig VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 -#======================================================================== +######################################################################### # ARM supplied Versatile development boards -#======================================================================== +######################################################################### + +cm4008_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 + +cm41xx_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + versatile_config \ versatileab_config \ versatilepb_config : unconfig @@ -2537,12 +2547,6 @@ versatilepb_config : unconfig voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue -cm4008_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 - -cm41xx_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 - ######################################################################### ## S3C44B0 Systems ######################################################################### @@ -2657,8 +2661,6 @@ zylonite_config : ######################################################################### ## ARM1136 Systems ######################################################################### -omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @@ -2675,6 +2677,9 @@ imx31_phycore_config : unconfig mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 +omap2420h4_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx + #======================================================================== # i386 #======================================================================== @@ -2724,6 +2729,7 @@ tb0229_config: unconfig ######################################################################### ## MIPS32 AU1X00 ######################################################################### + dbau1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h @@ -2749,17 +2755,17 @@ dbau1550_el_config : unconfig @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 +gth2_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h + @$(MKCONFIG) -a gth2 mips mips gth2 + pb1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h @$(MKCONFIG) -a pb1x00 mips mips pb1x00 -gth2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h - @$(MKCONFIG) -a gth2 mips mips gth2 - -qemu_mips_config: unconfig +qemu_mips_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h @$(MKCONFIG) -a qemu-mips mips mips qemu-mips @@ -2778,6 +2784,24 @@ purple_config : unconfig ## Nios32 ######################################################################### +ADNPESC1_DNPEVA2_base_32_config \ +ADNPESC1_base_32_config \ +ADNPESC1_config: unconfig + @mkdir -p $(obj)include + @[ -z "$(findstring _DNPEVA2,$@)" ] || \ + { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ + $(XECHO) "... DNP/EVA2 configuration" ; \ + } + @[ -z "$(findstring _base_32,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration" ; \ + } + @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ + } + @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv + DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @@ -2819,24 +2843,6 @@ DK1S10_config: unconfig } @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera -ADNPESC1_DNPEVA2_base_32_config \ -ADNPESC1_base_32_config \ -ADNPESC1_config: unconfig - @mkdir -p $(obj)include - @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ - $(XECHO) "... DNP/EVA2 configuration" ; \ - } - @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration" ; \ - } - @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv - ######################################################################### ## Nios-II ######################################################################### @@ -2857,21 +2863,19 @@ PCI5441_config : unconfig @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== -# MicroBlaze -#======================================================================== -######################################################################### ## Microblaze -######################################################################### -suzaku_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno +#======================================================================== ml401_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ML401 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx +suzaku_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno + xupv2p_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h @@ -2894,9 +2898,9 @@ $(BFIN_BOARDS): #======================================================================== # AVR32 #======================================================================== -######################################################################### -## AT32AP70xx -######################################################################### + +atngw100_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x atstk1002_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x @@ -2910,16 +2914,14 @@ atstk1004_config : unconfig atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x -atngw100_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x - -######################################################################### -######################################################################### -######################################################################### +#======================================================================== +# SH3 (SuperH) +#======================================================================== ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### + mpr2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h @@ -2933,6 +2935,12 @@ ms7720se_config: unconfig ######################################################################### ## sh4 (Renesas SuperH) ######################################################################### + +MigoR_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 MigoR + ms7750se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h @@ -2943,21 +2951,16 @@ ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se -MigoR_config : unconfig +r2dplus_config : unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 MigoR + @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r2dplus r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h @./mkconfig -a $(@:_config=) sh sh4 r7780mp -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r2dplus - sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h @@ -2966,6 +2969,7 @@ sh7763rdp_config : unconfig #======================================================================== # SPARC #======================================================================== + ######################################################################### ## LEON3 ######################################################################### diff --git a/board/ads5121/README b/board/ads5121/README index f2d1df3..defcd6b 100644 --- a/board/ads5121/README +++ b/board/ads5121/README @@ -5,5 +5,3 @@ ability and set the correct frequency and memory configuration. To configure for the older Rev 2 ADS5121 type (this will not have PCI) make ads5121_rev2_config - - diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index d8631eb..e53ead0 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -465,6 +465,4 @@ unsigned int get_cpu_board_revision(void) return MPC85XX_CPU_BOARD_REV(e.major, e.minor); } - #endif - diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index da38c32..1c0a416 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -218,15 +218,15 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) iflag = disable_interrupts(); #if (CONFIG_COMMANDS & CFG_CMD_USB) - /* - * turn off USB to prevent the host controller from writing to the - * SDRAM while Linux is booting. This could happen (at least for OHCI - * controller), because the HCCA (Host Controller Communication Area) - * lies within the SDRAM and the host controller writes continously to - * this area (as busmaster!). The HccaFrameNumber is for example - * updated every 1 ms within the HCCA structure in SDRAM! For more - * details see the OpenHCI specification. - */ + /* + * turn off USB to prevent the host controller from writing to the + * SDRAM while Linux is booting. This could happen (at least for OHCI + * controller), because the HCCA (Host Controller Communication Area) + * lies within the SDRAM and the host controller writes continously to + * this area (as busmaster!). The HccaFrameNumber is for example + * updated every 1 ms within the HCCA structure in SDRAM! For more + * details see the OpenHCI specification. + */ usb_stop(); #endif diff --git a/doc/README.mvbc_p b/doc/README.mvbc_p index d32e57f..e3fcb4e 100644 --- a/doc/README.mvbc_p +++ b/doc/README.mvbc_p @@ -11,7 +11,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P) 2 System Components -2.1 CPU +2.1 CPU Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB. 64MB SDRAM @ 133MHz. 8 MByte Nor Flash on local bus. @@ -20,7 +20,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P) 2.2 PCI PCI clock fixed at 66MHz. Arbitration inside FPGA. Intel GD82541ER network MAC/PHY and FPGA connected. - + 2.3 FPGA Altera Cyclone-II EP2C8 with PCI DMA engine. Connects to Matrix Vision specific CCD/CMOS sensor interface. @@ -71,4 +71,3 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P) 2. Initrd - name is stored in "initrd_name" 3. device tree blob - name is stored in "dtb_name" Fallback files are the flash versions. -