MIPS: add support for Broadcom MIPS BCM63268 SoC family

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/mips/dts/brcm,bcm63268.dtsi

@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		reg = <0x10000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu@0 {
+			compatible = "brcm,bcm63268-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bcm63268-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		pll_cntl: syscon@10000008 {
+			compatible = "syscon";
+			reg = <0x10000008 0x4>;
+		};
+
+		syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pll_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		memory-controller@10003000 {
+			compatible = "brcm,bcm6328-mc";
+			reg = <0x10003000 0x1000>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/mips/mach-bmips/Kconfig

@@ -4,6 +4,7 @@ menu "Broadcom MIPS platforms"
 config SYS_SOC
 	default "bcm6328" if SOC_BMIPS_BCM6328
 	default "bcm6358" if SOC_BMIPS_BCM6358
+	default "bcm63268" if SOC_BMIPS_BCM63268
 
 choice
 	prompt "Broadcom MIPS SoC select"
@@ -30,6 +31,18 @@ config SOC_BMIPS_BCM6358
 	help
 	  This supports BMIPS BCM6358 family including BCM6358 and BCM6359.
 
+config SOC_BMIPS_BCM63268
+	bool "BMIPS BCM63268 family"
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select MIPS_TUNE_4KC
+	select MIPS_L1_CACHE_SHIFT_4
+	select SWAP_IO_SPACE
+	select SYSRESET_SYSCON
+	help
+	  This supports BMIPS BCM63268 family including BCM63168, BCM63169,
+	  BCM63268 and BCM63269.
+
 endchoice
 
 choice

include/configs/bmips_bcm63268.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM63268_H
+#define __CONFIG_BMIPS_BCM63268_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	200000000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_INIT_SP_OFFSET	0x2000
+#endif
+
+#endif /* __CONFIG_BMIPS_BCM63268_H */