Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

net: Add support AX88796L ethernet device

Browse Source 
AX88796L is device of NE2000 compatible.
This patch support AX88796L ethernet device.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
master
goda.yusuke 17 years ago committed by Wolfgang Denk
parent e0a6140dd3
commit 6a8a5dc475
2 changed files with 223 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 217
      drivers/net/ax88796.h
  2. 6
      drivers/net/ne2000.c

217
drivers/net/ax88796.h
Unescape View File

@ -0,0 +1,217 @@
/*
* AX88796L(NE2000) support
*
* (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef __DRIVERS_AX88796L_H__
#define __DRIVERS_AX88796L_H__
#define DP_DATA (0x10 << 1)
#define START_PG 0x40 /* First page of TX buffer */
#define START_PG2 0x48
#define STOP_PG 0x80 /* Last page +1 of RX ring */
#define TX_PAGES 12
#define RX_START (START_PG+TX_PAGES)
#define RX_END STOP_PG
#define AX88796L_BASE_ADDRESS CONFIG_DRIVER_NE2000_BASE
#define AX88796L_BYTE_ACCESS 0x00001000
#define AX88796L_OFFSET 0x00000400
#define AX88796L_ADDRESS_BYTE AX88796L_BASE_ADDRESS + \
AX88796L_BYTE_ACCESS + AX88796L_OFFSET
#define AX88796L_REG_MEMR AX88796L_ADDRESS_BYTE + (0x14<<1)
#define AX88796L_REG_CR AX88796L_ADDRESS_BYTE + (0x00<<1)
#define AX88796L_CR (*(vu_short *)(AX88796L_REG_CR))
#define AX88796L_MEMR (*(vu_short *)(AX88796L_REG_MEMR))
#define EECS_HIGH (AX88796L_MEMR |= 0x10)
#define EECS_LOW (AX88796L_MEMR &= 0xef)
#define EECLK_HIGH (AX88796L_MEMR |= 0x80)
#define EECLK_LOW (AX88796L_MEMR &= 0x7f)
#define EEDI_HIGH (AX88796L_MEMR |= 0x20)
#define EEDI_LOW (AX88796L_MEMR &= 0xdf)
#define EEDO ((AX88796L_MEMR & 0x40)>>6)
#define PAGE0_SET (AX88796L_CR &= 0x3f)
#define PAGE1_SET (AX88796L_CR = (AX88796L_CR & 0x3f) | 0x40)
#define BIT_DUMMY 0
#define MAC_EEP_READ 1
#define MAC_EEP_WRITE 2
#define MAC_EEP_ERACE 3
#define MAC_EEP_EWEN 4
#define MAC_EEP_EWDS 5
/* R7780MP Specific code */
#if defined(CONFIG_R7780MP)
#define ISA_OFFSET 0x1400
#define DP_IN(_b_, _o_, _d_) (_d_) = \
*( (vu_short *) ((_b_) + ((_o_) * 2) + ISA_OFFSET))
#define DP_OUT(_b_, _o_, _d_) \
*((vu_short *)((_b_) + ((_o_) * 2) + ISA_OFFSET)) = (_d_)
#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_) + ISA_OFFSET))
#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
#else
/* Please change for your target boards */
#define ISA_OFFSET 0x0000
#define DP_IN(_b_, _o_, _d_) (_d_) = *( (vu_short *)((_b_)+(_o_ )+ISA_OFFSET))
#define DP_OUT(_b_, _o_, _d_) *((vu_short *)((_b_)+(_o_)+ISA_OFFSET)) = (_d_)
#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_)+ISA_OFFSET))
#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
#endif
/*
* Set 1 bit data
*/
static void ax88796_bitset(u32 bit)
{
/* DATA1 */
if( bit )
EEDI_HIGH;
else
EEDI_LOW;
EECLK_LOW;
udelay(1000);
EECLK_HIGH;
udelay(1000);
EEDI_LOW;
}
/*
* Get 1 bit data
*/
static u8 ax88796_bitget(void)
{
u8 bit;
EECLK_LOW;
udelay(1000);
/* DATA */
bit = EEDO;
EECLK_HIGH;
udelay(1000);
return bit;
}
/*
* Send COMMAND to EEPROM
*/
static void ax88796_eep_cmd(u8 cmd)
{
ax88796_bitset(BIT_DUMMY);
switch(cmd){
case MAC_EEP_READ:
ax88796_bitset(1);
ax88796_bitset(1);
ax88796_bitset(0);
break;
case MAC_EEP_WRITE:
ax88796_bitset(1);
ax88796_bitset(0);
ax88796_bitset(1);
break;
case MAC_EEP_ERACE:
ax88796_bitset(1);
ax88796_bitset(1);
ax88796_bitset(1);
break;
case MAC_EEP_EWEN:
ax88796_bitset(1);
ax88796_bitset(0);
ax88796_bitset(0);
break;
case MAC_EEP_EWDS:
ax88796_bitset(1);
ax88796_bitset(0);
ax88796_bitset(0);
break;
default:
break;
}
}
static void ax88796_eep_setaddr(u16 addr)
{
int i ;
for( i = 7 ; i >= 0 ; i-- )
ax88796_bitset(addr & (1 << i));
}
/*
* Get data from EEPROM
*/
static u16 ax88796_eep_getdata(void)
{
ushort data = 0;
int i;
ax88796_bitget(); /* DUMMY */
for( i = 0 ; i < 16 ; i++ ){
data <<= 1;
data |= ax88796_bitget();
}
return data;
}
static void ax88796_mac_read(u8 *buff)
{
int i ;
u16 data, addr = 0;
for( i = 0 ; i < 3; i++ )
{
EECS_HIGH;
EEDI_LOW;
udelay(1000);
/* READ COMMAND */
ax88796_eep_cmd(MAC_EEP_READ);
/* ADDRESS */
ax88796_eep_setaddr(addr++);
/* GET DATA */
data = ax88796_eep_getdata();
*buff++ = (uchar)(data & 0xff);
*buff++ = (uchar)((data >> 8) & 0xff);
EECLK_LOW;
EEDI_LOW;
EECS_LOW;
}
}
int get_prom(u8* mac_addr)
{
u8 prom[32];
int i;
ax88796_mac_read(prom);
for (i = 0; i < 6; i++){
mac_addr[i] = prom[i];
}
return 1;
}
#endif /* __DRIVERS_AX88796L_H__ */

6
drivers/net/ne2000.c
Unescape View File

@ -112,8 +112,13 @@ void uboot_push_tx_done(int key, int val);
/* NE2000 base header file */
#include "ne2000_base.h"
#if defined(CONFIG_DRIVER_AX88796L)
/* AX88796L support */
#include "ax88796.h"
#else
/* Basic NE2000 chip support */
#include "ne2000.h"
#endif
static dp83902a_priv_data_t nic; /* just one instance of the card supported */
@ -131,6 +136,7 @@ dp83902a_init(void)
DEBUG_LINE();
#if defined(NE2000_BASIC_INIT)
/* AX88796L doesn't need */
/* Prepare ESA */
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
/* Use the address from the serial EEPROM */

Write Preview
Loading…
Cancel
Save