Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

sunxi: usb: USB_MUSB_SUNXI move to musb-new Kconfig

Browse Source 
Now that the musb-new driver has a Kconfig, we can move Kconfig options to
enable controllers to it, so that it's easier in e.g. menuconfig.

In addition, this allows declaring support for USB_MUSB_HOST/GADGET in
defconfigs instead of the USB_MUSB_SUNXI controller, that will get selected
automatically when needed.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
master
Paul Kocialkowski 9 years ago committed by Marek Vasut
parent 5d6c2f4b5a
commit 6bed24cc62
23 changed files with 35 additions and 30 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 9
      board/sunxi/Kconfig
  2. 2
      configs/Ainol_AW1_defconfig
  3. 2
      configs/Ampe_A76_defconfig
  4. 2
      configs/CSQ_CS908_defconfig
  5. 2
      configs/Chuwi_V7_CW0825_defconfig
  6. 2
      configs/Et_q8_v1_6_defconfig
  7. 2
      configs/Hyundai_A7HD_defconfig
  8. 2
      configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
  9. 2
      configs/Ippo_q8h_v1_2_defconfig
  10. 2
      configs/Ippo_q8h_v5_defconfig
  11. 2
      configs/MSI_Primo81_defconfig
  12. 2
      configs/Mele_A1000G_quad_defconfig
  13. 2
      configs/Mini-X_defconfig
  14. 2
      configs/TZX-Q8-713B7_defconfig
  15. 2
      configs/UTOO_P66_defconfig
  16. 2
      configs/Yones_Toptech_BD1078_defconfig
  17. 2
      configs/ba10_tv_box_defconfig
  18. 2
      configs/forfun_q88db_defconfig
  19. 2
      configs/ga10h_v1_1_defconfig
  20. 2
      configs/iNet_3F_defconfig
  21. 2
      configs/iNet_3W_defconfig
  22. 2
      configs/iNet_86VS_defconfig
  23. 14
      drivers/usb/musb-new/Kconfig

9
board/sunxi/Kconfig
Unescape View File

@ -539,15 +539,6 @@ config VIDEO_LCD_TL059WV5C0
endchoice
config USB_MUSB_SUNXI
bool "Enable sunxi OTG / DRC USB controller in host mode"
default n
---help---
Say y here to enable support for the sunxi OTG / DRC USB controller
used on almost all sunxi boards. Note currently u-boot can only have
one usb host controller enabled at a time, so enabling this on boards
which also use the ehci host controller will result in build errors.
config USB_KEYBOARD
boolean "Enable USB keyboard support"
default y

2
configs/Ainol_AW1_defconfig
Unescape View File

@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Ampe_A76_defconfig
Unescape View File

@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/CSQ_CS908_defconfig
Unescape View File

@ -15,4 +15,4 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y

2
configs/Chuwi_V7_CW0825_defconfig
Unescape View File

@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Et_q8_v1_6_defconfig
Unescape View File

@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Hyundai_A7HD_defconfig
Unescape View File

@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH9"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
Unescape View File

@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Ippo_q8h_v1_2_defconfig
Unescape View File

@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Ippo_q8h_v5_defconfig
Unescape View File

@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/MSI_Primo81_defconfig
Unescape View File

@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_KEYBOARD is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

2
configs/Mele_A1000G_quad_defconfig
Unescape View File

@ -17,4 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y

2
configs/Mini-X_defconfig
Unescape View File

@ -9,5 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB0_VBUS_PIN="PB9"

2
configs/TZX-Q8-713B7_defconfig
Unescape View File

@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/UTOO_P66_defconfig
Unescape View File

@ -15,7 +15,7 @@ CONFIG_VIDEO_LCD_RESET="PG11"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/Yones_Toptech_BD1078_defconfig
Unescape View File

@ -16,7 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/ba10_tv_box_defconfig
Unescape View File

@ -12,5 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB0_VBUS_PIN="PB9"

2
configs/forfun_q88db_defconfig
Unescape View File

@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/ga10h_v1_1_defconfig
Unescape View File

@ -14,7 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/iNet_3F_defconfig
Unescape View File

@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/iNet_3W_defconfig
Unescape View File

@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

2
configs/iNet_86VS_defconfig
Unescape View File

@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y

14
drivers/usb/musb-new/Kconfig
Unescape View File

@ -12,3 +12,17 @@ config USB_MUSB_GADGET
bool "MUSB gadget mode support"
help
Enables the MUSB USB dual-role controller in gadget mode.
if USB_MUSB_HOST || USB_MUSB_GADGET
config USB_MUSB_SUNXI
bool "Enable sunxi OTG / DRC USB controller"
depends on ARCH_SUNXI
default y
---help---
Say y here to enable support for the sunxi OTG / DRC USB controller
used on almost all sunxi boards. Note currently u-boot can only have
one usb host controller enabled at a time, so enabling this on boards
which also use the ehci host controller will result in build errors.
endif

Write Preview
Loading…
Cancel
Save