powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500

Using E6500 L1 cache as initram requires L2 cache enabled.
Add l2-cache cluster enabling.

Setup stash id for L1 cache as (coreID) * 2 + 32 + 0
Setup stash id for L2 cache as (cluster) * 2 + 32 + 1
Stash id for L2 is only set for Chassis 2.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>

arch/powerpc/cpu/mpc85xx/cpu_init.c

@@ -295,6 +295,43 @@ static void __fsl_serdes__init(void)
 }
 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+	int i = 0;
+	u32 cluster;
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	struct ccsr_cluster_l2 __iomem *l2cache;
+
+	cluster = in_be32(&gur->tp_cluster[i].lower);
+	if (cluster & TP_CLUSTER_EOC)
+		return 0;
+
+	/* The first cache has already been set up, so skip it */
+	i++;
+
+	/* Look through the remaining clusters, and set up their caches */
+	do {
+		l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+
+		/* set stash ID to (cluster) * 2 + 32 + 1 */
+		clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+		printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+		out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+		while ((in_be32(&l2cache->l2csr0) &
+			(L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+			;
+		out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+		i++;
+	} while (!(cluster & TP_CLUSTER_EOC));
+
+	return 0;
+}
+#endif
+
 /*
  * Initialize L2 as cache.
  *
@@ -306,7 +343,12 @@ int cpu_init_r(void)
 {
 	__maybe_unused u32 svr = get_svr();
 #ifdef CONFIG_SYS_LBC_LCRR
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+	ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
 
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
@@ -356,7 +398,6 @@ int cpu_init_r(void)
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
-	volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	volatile uint cache_ctl;
 	uint ver;
 	u32 l2siz_field;
@@ -467,6 +508,11 @@ int cpu_init_r(void)
 	}
 
 skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+	if (l2cache->l2csr0 & L2CSR0_L2E)
+		printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+	enable_cluster_l2();
 #else
 	puts("disabled\n");
 #endif

arch/powerpc/cpu/mpc85xx/fdt.c

@@ -220,12 +220,19 @@ static inline void ft_fixup_l2cache(void *blob)
 
 	/* we dont bother w/L3 since no platform of this type has one */
 }
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+	defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 static inline void ft_fixup_l2cache(void *blob)
 {
 	int off, l2_off, l3_off = -1;
 	u32 *ph;
+#ifdef	CONFIG_BACKSIDE_L2_CACHE
 	u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+	struct ccsr_cluster_l2 *l2cache =
+		(struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+	u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
 	u32 size, line_size, num_ways, num_sets;
 	int has_l2 = 1;
 
@@ -257,7 +264,12 @@ static inline void ft_fixup_l2cache(void *blob)
 		if (has_l2) {
 #ifdef CONFIG_SYS_CACHE_STASHING
 			u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+			/* Only initialize every eighth thread */
+			if (reg && !((*reg) % 8))
+#else
 			if (reg)
+#endif
 				fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 					 (*reg * 2) + 32 + 1);
 #endif

arch/powerpc/cpu/mpc85xx/release.S

@@ -183,13 +183,6 @@ __secondary_start_page:
 	slwi	r8,r4,5
 	add	r10,r3,r8
 
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
-	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
-	slwi	r8,r4,1
-	addi	r8,r8,32
-	mtspr	L1CSR2,r8
-#endif
-
 #ifdef CONFIG_E6500
 	mfspr	r0,SPRN_PIR
 	/*
@@ -209,6 +202,13 @@ __secondary_start_page:
 
 	mtspr	SPRN_PIR,r4	/* write to PIR register */
 
+#ifdef CONFIG_SYS_CACHE_STASHING
+	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+	slwi	r8,r4,1
+	addi	r8,r8,32
+	mtspr	L1CSR2,r8
+#endif
+
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 	/*

arch/powerpc/cpu/mpc85xx/start.S

@@ -169,7 +169,7 @@ l2_disabled:
 	 *
 	 */
 
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
 	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
 	li	r2,(32 + 0)
 	mtspr	L1CSR2,r2
@@ -750,6 +750,41 @@ delete_temp_tlbs:
 
 #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+	/*
+	 * Create a TLB for the MMR location of CCSR
+	 * to access L2CSR0 register
+	 */
+	create_tlb0_entry 0, \
+		0, BOOKE_PAGESZ_4K, \
+		CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+	/* enable L2 cache */
+	lis	r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+	ori	r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+	li	r4, 33	/* stash id */
+	stw	r4, 4(r3)
+	lis	r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+	ori	r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+	sync
+	stw	r4, 0(r3)	/* invalidate L2 */
+1:	sync
+	lwz	r0, 0(r3)
+	twi	0, r0, 0
+	isync
+	and.	r1, r0, r4
+	bne	1b
+	lis	r4, L2CSR0_L2E@h
+	sync
+	stw	r4, 0(r3)	/* eanble L2 */
+delete_ccsr_l2_tlb:
+	delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 #define DCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
 #define LAW_SIZE_1M	0x13

arch/powerpc/include/asm/immap_85xx.h

@@ -2681,6 +2681,7 @@ struct ccsr_rman {
 #define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET	0x58b000
 #define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET	0x58c000
 #define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET	0x590000
+#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET	0xC20000
 #else
 #define CONFIG_SYS_MPC85xx_ECM_OFFSET		0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x2000
@@ -2825,4 +2826,62 @@ struct ccsr_rman {
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+struct ccsr_cluster_l2 {
+	u32 l2csr0;	/* 0x000 L2 cache control and status register 0 */
+	u32 l2csr1;	/* 0x004 L2 cache control and status register 1 */
+	u32 l2cfg0;	/* 0x008 L2 cache configuration register 0 */
+	u8  res_0c[500];/* 0x00c - 0x1ff */
+	u32 l2pir0;	/* 0x200 L2 cache partitioning ID register 0 */
+	u8  res_204[4];
+	u32 l2par0;	/* 0x208 L2 cache partitioning allocation register 0 */
+	u32 l2pwr0;	/* 0x20c L2 cache partitioning way register 0 */
+	u32 l2pir1;	/* 0x210 L2 cache partitioning ID register 1 */
+	u8  res_214[4];
+	u32 l2par1;	/* 0x218 L2 cache partitioning allocation register 1 */
+	u32 l2pwr1;	/* 0x21c L2 cache partitioning way register 1 */
+	u32 u2pir2;	/* 0x220 L2 cache partitioning ID register 2 */
+	u8  res_224[4];
+	u32 l2par2;	/* 0x228 L2 cache partitioning allocation register 2 */
+	u32 l2pwr2;	/* 0x22c L2 cache partitioning way register 2 */
+	u32 l2pir3;	/* 0x230 L2 cache partitioning ID register 3 */
+	u8  res_234[4];
+	u32 l2par3;	/* 0x238 L2 cache partitining allocation register 3 */
+	u32 l2pwr3;	/* 0x23c L2 cache partitining way register 3 */
+	u32 l2pir4;	/* 0x240 L2 cache partitioning ID register 3 */
+	u8  res244[4];
+	u32 l2par4;	/* 0x248 L2 cache partitioning allocation register 3 */
+	u32 l2pwr4;	/* 0x24c L2 cache partitioning way register 3 */
+	u32 l2pir5;	/* 0x250 L2 cache partitioning ID register 3 */
+	u8  res_254[4];
+	u32 l2par5;	/* 0x258 L2 cache partitioning allocation register 3 */
+	u32 l2pwr5;	/* 0x25c L2 cache partitioning way register 3 */
+	u32 l2pir6;	/* 0x260 L2 cache partitioning ID register 3 */
+	u8  res_264[4];
+	u32 l2par6;	/* 0x268 L2 cache partitioning allocation register 3 */
+	u32 l2pwr6;	/* 0x26c L2 cache partitioning way register 3 */
+	u32 l2pir7;	/* 0x270 L2 cache partitioning ID register 3 */
+	u8  res274[4];
+	u32 l2par7;	/* 0x278 L2 cache partitioning allocation register 3 */
+	u32 l2pwr7;	/* 0x27c L2 cache partitioning way register 3 */
+	u8  res_280[0xb80]; /* 0x280 - 0xdff */
+	u32 l2errinjhi;	/* 0xe00 L2 cache error injection mask high */
+	u32 l2errinjlo;	/* 0xe04 L2 cache error injection mask low */
+	u32 l2errinjctl;/* 0xe08 L2 cache error injection control */
+	u8  res_e0c[20];	/* 0xe0c - 0x01f */
+	u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */
+	u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */
+	u32 l2captecc;	/* 0xe28 L2 cache error capture ECC syndrome */
+	u8  res_e2c[20];	/* 0xe2c - 0xe3f */
+	u32 l2errdet;	/* 0xe40 L2 cache error detect */
+	u32 l2errdis;	/* 0xe44 L2 cache error disable */
+	u32 l2errinten;	/* 0xe48 L2 cache error interrupt enable */
+	u32 l2errattr;	/* 0xe4c L2 cache error attribute */
+	u32 l2erreaddr;	/* 0xe50 L2 cache error extended address */
+	u32 l2erraddr;	/* 0xe54 L2 cache error address */
+	u32 l2errctl;	/* 0xe58 L2 cache error control */
+};
+#define CONFIG_SYS_FSL_CLUSTER_1_L2 \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET)
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 #endif /*__IMMAP_85xx__*/